| Message ID | 20230203-evk-board-support-v3-8-0003e80e0095@baylibre.com |
|---|---|
| State | Accepted |
| Commit | 8b5db516c9416d72d49c95656662fa1fbea446e1 |
| Headers | show |
| Series | Improve the MT8365 SoC and EVK board support | expand |
On 29/03/2023 15:21, AngeloGioacchino Del Regno wrote: > Il 29/03/23 10:54, Alexandre Mergnat ha scritto: >> There are three ports of MSDC (MMC and SD Controller), which are: >> - MSDC0: EMMC5.1 >> - MSDC1: SD3.0/SDIO3.0 >> - MSDC2: SDIO3.0+ >> >> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> >> --- >> arch/arm64/boot/dts/mediatek/mt8365.dtsi | 39 ++++++++++++++++++++++++++++++++ >> 1 file changed, 39 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi >> b/arch/arm64/boot/dts/mediatek/mt8365.dtsi >> index 687011353f69..a67eeca28da5 100644 >> --- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi >> +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi >> @@ -399,6 +399,45 @@ usb_host: usb@11200000 { >> }; >> }; >> + mmc0: mmc@11230000 { >> + compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc"; >> + reg = <0 0x11230000 0 0x1000>, >> + <0 0x11cd0000 0 0x1000>; >> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_LOW>; >> + clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>, >> + <&infracfg CLK_IFR_MSDC0_HCLK>, >> + <&infracfg CLK_IFR_MSDC0_SRC>; >> + clock-names = "source", "hclk", "source_cg"; >> + status = "disabled"; >> + }; >> + >> + mmc1: mmc@11240000 { >> + compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc"; >> + reg = <0 0x11240000 0 0x1000>, >> + <0 0x11c90000 0 0x1000>; >> + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_LOW>; >> + clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>, >> + <&infracfg CLK_IFR_MSDC1_HCLK>, >> + <&infracfg CLK_IFR_MSDC1_SRC>; >> + clock-names = "source", "hclk", "source_cg"; >> + status = "disabled"; >> + }; >> + >> + mmc2: mmc@11250000 { >> + compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc"; >> + reg = <0 0x11250000 0 0x1000>, >> + <0 0x11c60000 0 0x1000>; >> + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_LOW>; >> + clocks = <&topckgen CLK_TOP_MSDC50_2_SEL>, >> + <&infracfg CLK_IFR_MSDC2_HCLK>, >> + <&infracfg CLK_IFR_MSDC2_SRC>, >> + <&infracfg CLK_IFR_MSDC2_BK>, >> + <&infracfg CLK_IFR_AP_MSDC0>; >> + clock-names = "source", "hclk", "source_cg", >> + "bus_clk", "sys_cg"; > > clock-names for this do fit in one 90 columns line. > > After compressing it, > > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > I applied the patch and dropped you Reviewed-by tag. I think it depends on the taste of everybody how you prefer to structure this. I've also seen that on boards you care (mt8183 in that case) there a clocks that don't adhere to the criteria you mention here ;-) Anyway many thanks for reviewing this and all the great work in general. Honestly I feel I didn't made justice by dropping your tag, but as you stated so explicitly... :) Regards, Matthias
diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi index 687011353f69..a67eeca28da5 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi @@ -399,6 +399,45 @@ usb_host: usb@11200000 { }; }; + mmc0: mmc@11230000 { + compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc"; + reg = <0 0x11230000 0 0x1000>, + <0 0x11cd0000 0 0x1000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>, + <&infracfg CLK_IFR_MSDC0_HCLK>, + <&infracfg CLK_IFR_MSDC0_SRC>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + + mmc1: mmc@11240000 { + compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc"; + reg = <0 0x11240000 0 0x1000>, + <0 0x11c90000 0 0x1000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>, + <&infracfg CLK_IFR_MSDC1_HCLK>, + <&infracfg CLK_IFR_MSDC1_SRC>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + + mmc2: mmc@11250000 { + compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc"; + reg = <0 0x11250000 0 0x1000>, + <0 0x11c60000 0 0x1000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_MSDC50_2_SEL>, + <&infracfg CLK_IFR_MSDC2_HCLK>, + <&infracfg CLK_IFR_MSDC2_SRC>, + <&infracfg CLK_IFR_MSDC2_BK>, + <&infracfg CLK_IFR_AP_MSDC0>; + clock-names = "source", "hclk", "source_cg", + "bus_clk", "sys_cg"; + status = "disabled"; + }; + u3phy: t-phy@11cc0000 { compatible = "mediatek,mt8365-tphy", "mediatek,generic-tphy-v2"; #address-cells = <1>;
There are three ports of MSDC (MMC and SD Controller), which are: - MSDC0: EMMC5.1 - MSDC1: SD3.0/SDIO3.0 - MSDC2: SDIO3.0+ Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> --- arch/arm64/boot/dts/mediatek/mt8365.dtsi | 39 ++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)