| Message ID | 20220315211936.442708-4-nfraprado@collabora.com |
|---|---|
| State | Accepted |
| Commit | edbacb36ea50527672e985e7ab062562dbe4a7f0 |
| Headers | show |
| Series | dt-bindings: pinctrl: mt8192: Add missing wrapping node and properties | expand |
Il 15/03/22 22:19, Nícolas F. R. A. Prado ha scritto: > Add the mediatek,pull-up-adv property to the pinctrl-mt8192 dt-binding > to allow configuring pull-up resistors on the pins of MT8192. It is the > same as in mt8183-pinctrl. > > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
On Tue, Mar 15, 2022 at 10:20 PM Nícolas F. R. A. Prado <nfraprado@collabora.com> wrote: > Add the mediatek,pull-up-adv property to the pinctrl-mt8192 dt-binding > to allow configuring pull-up resistors on the pins of MT8192. It is the > same as in mt8183-pinctrl. > > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Patch applied! Yours, Linus Walleij
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml index b52d8d0eb2d0..e27cbcc6e8f9 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml @@ -104,6 +104,17 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2, 3, 4, 5, 6, 7] + mediatek,pull-up-adv: + description: | + Pull up settings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + bias-pull-down: true bias-pull-up: true
Add the mediatek,pull-up-adv property to the pinctrl-mt8192 dt-binding to allow configuring pull-up resistors on the pins of MT8192. It is the same as in mt8183-pinctrl. Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> --- .../devicetree/bindings/pinctrl/pinctrl-mt8192.yaml | 11 +++++++++++ 1 file changed, 11 insertions(+)