diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
new file mode 100644
index 000000000000..6b607bd8d003
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6318-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6318 pin controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+  The pin controller node should be the child of a syscon node.
+
+  Refer to the the bindings described in
+  Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+  compatible:
+    const: brcm,bcm6318-pinctrl
+
+  gpio:
+    type: object
+    properties:
+      compatible:
+        const: brcm,bcm6318-gpio
+
+      data:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Offset in the register map for the data register (in bytes).
+
+      dirout:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Offset in the register map for the dirout register (in bytes).
+
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+
+      gpio-ranges:
+        maxItems: 1
+
+    required:
+      - gpio-controller
+      - gpio-ranges
+      - '#gpio-cells'
+
+    additionalProperties: false
+
+patternProperties:
+  '^.*-pins$':
+    if:
+      type: object
+    then:
+      properties:
+        function:
+          $ref: "pinmux-node.yaml#/properties/function"
+          enum: [ ephy0_spd_led, ephy1_spd_led, ephy2_spd_led, ephy3_spd_led,
+                  ephy0_act_led, ephy1_act_led, ephy2_act_led, ephy3_act_led,
+                  serial_led_data, serial_led_clk, inet_act_led, inet_fail_led,
+                  dsl_led, post_fail_led, wlan_wps_led, usb_pwron,
+                  usb_device_led, usb_active ]
+
+        pins:
+          $ref: "pinmux-node.yaml#/properties/pins"
+          enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+                  gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ]
+
+required:
+  - compatible
+  - gpio
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio_cntl@10000080 {
+      compatible = "brcm,bcm6318-gpio-controller", "syscon", "simple-mfd";
+      reg = <0x10000080 0x80>;
+
+      pinctrl: pinctrl {
+        compatible = "brcm,bcm6318-pinctrl";
+
+        gpio {
+          compatible = "brcm,bcm6318-gpio";
+          data = <0xc>;
+          dirout = <0x4>;
+
+          gpio-controller;
+          gpio-ranges = <&pinctrl 0 0 50>;
+          #gpio-cells = <2>;
+        };
+
+        pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
+          function = "ephy0_spd_led";
+          pins = "gpio0";
+        };
+
+        pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
+          function = "ephy1_spd_led";
+          pins = "gpio1";
+        };
+
+        pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
+          function = "ephy2_spd_led";
+          pins = "gpio2";
+        };
+
+        pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
+          function = "ephy3_spd_led";
+          pins = "gpio3";
+        };
+
+        pinctrl_ephy0_act_led: ephy0_act_led-pins {
+          function = "ephy0_act_led";
+          pins = "gpio4";
+        };
+
+        pinctrl_ephy1_act_led: ephy1_act_led-pins {
+          function = "ephy1_act_led";
+          pins = "gpio5";
+        };
+
+        pinctrl_ephy2_act_led: ephy2_act_led-pins {
+          function = "ephy2_act_led";
+          pins = "gpio6";
+        };
+
+        pinctrl_ephy3_act_led: ephy3_act_led-pins {
+          function = "ephy3_act_led";
+          pins = "gpio7";
+        };
+
+        pinctrl_serial_led: serial_led-pins {
+          pinctrl_serial_led_data: serial_led_data-pins {
+            function = "serial_led_data";
+            pins = "gpio6";
+          };
+
+          pinctrl_serial_led_clk: serial_led_clk-pins {
+            function = "serial_led_clk";
+            pins = "gpio7";
+          };
+        };
+
+        pinctrl_inet_act_led: inet_act_led-pins {
+          function = "inet_act_led";
+          pins = "gpio8";
+        };
+
+        pinctrl_inet_fail_led: inet_fail_led-pins {
+          function = "inet_fail_led";
+          pins = "gpio9";
+        };
+
+        pinctrl_dsl_led: dsl_led-pins {
+          function = "dsl_led";
+          pins = "gpio10";
+        };
+
+        pinctrl_post_fail_led: post_fail_led-pins {
+          function = "post_fail_led";
+          pins = "gpio11";
+        };
+
+        pinctrl_wlan_wps_led: wlan_wps_led-pins {
+          function = "wlan_wps_led";
+          pins = "gpio12";
+        };
+
+        pinctrl_usb_pwron: usb_pwron-pins {
+          function = "usb_pwron";
+          pins = "gpio13";
+        };
+
+        pinctrl_usb_device_led: usb_device_led-pins {
+          function = "usb_device_led";
+          pins = "gpio13";
+        };
+
+        pinctrl_usb_active: usb_active-pins {
+          function = "usb_active";
+          pins = "gpio40";
+        };
+      };
+    };
