@@ -52,7 +52,7 @@ endif # PMIC_OPREGION
config TPS68470_PMIC_OPREGION
bool "ACPI operation region support for TPS68470 PMIC"
- depends on MFD_TPS68470
+ depends on INTEL_SKL_INT3472
help
This config adds ACPI operation region support for TI TPS68470 PMIC.
TPS68470 device is an advanced power management unit that powers
@@ -1343,7 +1343,7 @@ config GPIO_TPS65912
config GPIO_TPS68470
bool "TPS68470 GPIO"
- depends on MFD_TPS68470
+ depends on INTEL_SKL_INT3472
help
Select this option to enable GPIO driver for the TPS68470
chip family.
@@ -1520,24 +1520,6 @@ config MFD_TPS65217
This driver can also be built as a module. If so, the module
will be called tps65217.
-config MFD_TPS68470
- bool "TI TPS68470 Power Management / LED chips"
- depends on ACPI && PCI && I2C=y
- depends on I2C_DESIGNWARE_PLATFORM=y
- select MFD_CORE
- select REGMAP_I2C
- help
- If you say yes here you get support for the TPS68470 series of
- Power Management / LED chips.
-
- These include voltage regulators, LEDs and other features
- that are often used in portable devices.
-
- This option is a bool as it provides an ACPI operation
- region, which must be available before any of the devices
- using this are probed. This option also configures the
- designware-i2c driver to be built-in, for the same reason.
-
config MFD_TI_LP873X
tristate "TI LP873X Power Management IC"
depends on I2C
@@ -105,7 +105,6 @@ obj-$(CONFIG_MFD_TPS65910) += tps65910.o
obj-$(CONFIG_MFD_TPS65912) += tps65912-core.o
obj-$(CONFIG_MFD_TPS65912_I2C) += tps65912-i2c.o
obj-$(CONFIG_MFD_TPS65912_SPI) += tps65912-spi.o
-obj-$(CONFIG_MFD_TPS68470) += tps68470.o
obj-$(CONFIG_MFD_TPS80031) += tps80031.o
obj-$(CONFIG_MENELAUS) += menelaus.o
deleted file mode 100644
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * TPS68470 chip Parent driver
- *
- * Copyright (C) 2017 Intel Corporation
- *
- * Authors:
- * Rajmohan Mani <rajmohan.mani@intel.com>
- * Tianshu Qiu <tian.shu.qiu@intel.com>
- * Jian Xu Zheng <jian.xu.zheng@intel.com>
- * Yuning Pu <yuning.pu@intel.com>
- */
-
-#include <linux/acpi.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/mfd/core.h>
-#include <linux/mfd/tps68470.h>
-#include <linux/regmap.h>
-
-static const struct mfd_cell tps68470s[] = {
- { .name = "tps68470-gpio" },
- { .name = "tps68470_pmic_opregion" },
-};
-
-static const struct regmap_config tps68470_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
- .max_register = TPS68470_REG_MAX,
-};
-
-static int tps68470_chip_init(struct device *dev, struct regmap *regmap)
-{
- unsigned int version;
- int ret;
-
- /* Force software reset */
- ret = regmap_write(regmap, TPS68470_REG_RESET, TPS68470_REG_RESET_MASK);
- if (ret)
- return ret;
-
- ret = regmap_read(regmap, TPS68470_REG_REVID, &version);
- if (ret) {
- dev_err(dev, "Failed to read revision register: %d\n", ret);
- return ret;
- }
-
- dev_info(dev, "TPS68470 REVID: 0x%x\n", version);
-
- return 0;
-}
-
-static int tps68470_probe(struct i2c_client *client)
-{
- struct device *dev = &client->dev;
- struct regmap *regmap;
- int ret;
-
- regmap = devm_regmap_init_i2c(client, &tps68470_regmap_config);
- if (IS_ERR(regmap)) {
- dev_err(dev, "devm_regmap_init_i2c Error %ld\n",
- PTR_ERR(regmap));
- return PTR_ERR(regmap);
- }
-
- i2c_set_clientdata(client, regmap);
-
- ret = tps68470_chip_init(dev, regmap);
- if (ret < 0) {
- dev_err(dev, "TPS68470 Init Error %d\n", ret);
- return ret;
- }
-
- ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, tps68470s,
- ARRAY_SIZE(tps68470s), NULL, 0, NULL);
- if (ret < 0) {
- dev_err(dev, "devm_mfd_add_devices failed: %d\n", ret);
- return ret;
- }
-
- return 0;
-}
-
-static const struct acpi_device_id tps68470_acpi_ids[] = {
- {"INT3472"},
- {},
-};
-
-static struct i2c_driver tps68470_driver = {
- .driver = {
- .name = "tps68470",
- .acpi_match_table = tps68470_acpi_ids,
- },
- .probe_new = tps68470_probe,
-};
-builtin_i2c_driver(tps68470_driver);