mbox series

[v10,0/6] Add minimal boot support for IPQ5018

Message ID 20230615090638.1771245-1-quic_srichara@quicinc.com
Headers show
Series Add minimal boot support for IPQ5018 | expand

Message

Sricharan R June 15, 2023, 9:06 a.m. UTC 
The IPQ5018 is Qualcomm's 802.11ax SoC for Routers,
Gateways and Access Points.

This series adds minimal board boot support for ipq5018-rdp432-c2 board.

[v10]  Dropped patches 3,4 for pinctrl (was picked by Linus)
       Fixed hex number style in patch 2 as per Konrad's comments.

[v9]   Change only in patch 2/8
	   Sorted the headers and cleaned the unwanted ones
 	   Added trailing comma for .parent_hws member
	   Removed the hunk touching ipq5332 kconfig  (unintentionally)

[v8]   Changed only in patch 4/8
                Fixed Kconfig to add COMPILE_TEST and removed header of.h.
                Instead using mod_devicetable.h. Added Linus reviewed-by

[v7]   Fixed tz reserved region size in patch 7/8

[v6]   Fixed patch [4/8] pinctrl driver for rebase issue.

[v5]
       Added Reviewed-by tags from Krzysztof Kozlowski.
       Changed patch [6/8] with [1] since its already Acked
       Rebased patch [4/8] on top of [2] and fixed other comments
       Fixed commit log for patch [7/8]
       Fixed comments for patch [2/8]

[1] https://patchwork.kernel.org/project/linux-arm-msm/patch/1678164097-13247-4-git-send-email-quic_mmanikan@quicinc.com/
[2] https://lore.kernel.org/r/1683718725-14869-1-git-send-email-quic_rohiagar@quicinc.com

[v4]
       Fixed all comments for clocks, schema, dts
       Added Reviewed-by tags.

[v3]
        Fixed all comments for clocks, schema fixes
        Picked up Reviewed-by from Bjorn for pinctrl driver

[v2]
        Fixed all comments and rebased for TOT.

Manikanta Mylavarapu (1):
  dt-bindings: scm: Add compatible for IPQ5018

Sricharan Ramabadhran (5):
  dt-bindings: arm64: Add IPQ5018 clock and reset
  clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018
  dt-bindings: qcom: Add ipq5018 bindings
  arm64: dts: Add ipq5018 SoC and rdp432-c2 board support
  arm64: defconfig: Enable IPQ5018 SoC base configs

 .../devicetree/bindings/arm/qcom.yaml         |    7 +
 .../bindings/clock/qcom,ipq5018-gcc.yaml      |   63 +
 .../bindings/firmware/qcom,scm.yaml           |    1 +
 arch/arm64/boot/dts/qcom/Makefile             |    1 +
 .../arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts |   72 +
 arch/arm64/boot/dts/qcom/ipq5018.dtsi         |  250 ++
 arch/arm64/configs/defconfig                  |    3 +
 drivers/clk/qcom/Kconfig                      |    8 +
 drivers/clk/qcom/Makefile                     |    1 +
 drivers/clk/qcom/gcc-ipq5018.c                | 3724 +++++++++++++++++
 include/dt-bindings/clock/qcom,gcc-ipq5018.h  |  183 +
 include/dt-bindings/reset/qcom,gcc-ipq5018.h  |  122 +
 12 files changed, 4435 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml
 create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi
 create mode 100644 drivers/clk/qcom/gcc-ipq5018.c
 create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5018.h
 create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq5018.h