| Message ID | 20240628-cleanup-ad7606-v2-5-96e02f90256d@baylibre.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | iio: adc: ad7606: Improvements | expand |
On Fri, 28 Jun 2024 14:48:23 +0000 Guillaume Stols <gstols@baylibre.com> wrote: > Add voltage supplies > > Signed-off-by: Guillaume Stols <gstols@baylibre.com> Trivial comment inline. No need to reroll for that though. > --- > Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml > index 509970922cda..a1c38a5812f7 100644 > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml > @@ -35,6 +35,15 @@ properties: > > avcc-supply: true > > + vdrive-supply: > + description: > + Determines the voltage level at which the interface logic pins will > + operate. > + > + refin-supply: > + description: > + The voltage supply for optional external reference voltage. > + > interrupts: > description: > The BUSY pin falling edge indicates that the conversion is over, and thus > @@ -106,9 +115,11 @@ required: > - reg > - spi-cpha > - avcc-supply > + - vdrive-supply > - interrupts > - adi,conversion-start-gpios > > + Unrelated white space change. Remember to check patches for these. If whitespace changes are needed have an additional patch that just does that. > allOf: > - $ref: /schemas/spi/spi-peripheral-props.yaml# > > @@ -130,6 +141,7 @@ examples: > spi-cpha; > > avcc-supply = <&adc_vref>; > + vdrive-supply = <&vdd_supply>; > > interrupts = <25 IRQ_TYPE_EDGE_FALLING>; > interrupt-parent = <&gpio>; >
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index 509970922cda..a1c38a5812f7 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -35,6 +35,15 @@ properties: avcc-supply: true + vdrive-supply: + description: + Determines the voltage level at which the interface logic pins will + operate. + + refin-supply: + description: + The voltage supply for optional external reference voltage. + interrupts: description: The BUSY pin falling edge indicates that the conversion is over, and thus @@ -106,9 +115,11 @@ required: - reg - spi-cpha - avcc-supply + - vdrive-supply - interrupts - adi,conversion-start-gpios + allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# @@ -130,6 +141,7 @@ examples: spi-cpha; avcc-supply = <&adc_vref>; + vdrive-supply = <&vdd_supply>; interrupts = <25 IRQ_TYPE_EDGE_FALLING>; interrupt-parent = <&gpio>;
Add voltage supplies Signed-off-by: Guillaume Stols <gstols@baylibre.com> --- Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 12 ++++++++++++ 1 file changed, 12 insertions(+)