Message ID | 20240117125527.23324-2-tzimmermann@suse.de |
---|---|
State | Superseded |
Headers | show |
Series | firmware/sysfb: Track parent device for screen_info | expand |
Thomas Zimmermann <tzimmermann@suse.de> writes: Hello Thomas, > The plain values as stored in struct screen_info need to be decoded > before being used. Add helpers that decode the type of video output > and the framebuffer I/O aperture. > > Old or non-x86 systems may not set the type of video directly, but > only indicate the presence by storing 0x01 in orig_video_isVGA. The > decoding logic in screen_info_video_type() takes this into account. I always disliked how the orig_video_isVGA variable lost its meaning. > It then follows similar code in vgacon's vgacon_startup() to detect > the video type from the given values. > > A call to screen_info_resources() returns all known resources of the > given screen_info. The resources' values have been taken from existing > code in vgacon and vga16fb. These drivers can later be converted to > use the new interfaces. > > Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> > --- Thanks for doing this! It's quite useful to have these helpers, since as you mention the screen_info data decoding is complex and the variables used to store the video type and modes are confusing / misleading. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> I just have a few comments below: > +static inline bool __screen_info_has_ega_gfx(unsigned int mode) > +{ > + switch (mode) { > + case 0x0d: /* 320x200-4 */ > + case 0x0e: /* 640x200-4 */ > + case 0x0f: /* 640x350-1 */ > + case 0x10: /* 640x350-4 */ I wonder if makes sense to define some constant macros for these modes? I know that check_mode_supported() in drivers/video/fbdev/vga16fb.c also use magic numbers but I believe that it could ease readability. > + return true; > + default: > + return false; > + } > +} > + > +static inline bool __screen_info_has_vga_gfx(unsigned int mode) > +{ > + switch (mode) { > + case 0x10: /* 640x480-1 */ > + case 0x12: /* 640x480-4 */ > + case 0x13: /* 320-200-8 */ > + case 0x6a: /* 800x600-4 (VESA) */ > + return true; And same for these. It can be a follow-up patch though. [...] > +int screen_info_resources(const struct screen_info *si, struct resource *r, size_t num) > +{ > + struct resource *pos = r; > + unsigned int type = screen_info_video_type(si); > + u64 base, size; > + > + switch (type) { > + case VIDEO_TYPE_MDA: > + if (num > 0) > + resource_init_io_named(pos++, 0x3b0, 12, "mda"); I see that drivers/video/fbdev/i740_reg.h has a #define MDA_BASE 0x3B0. Maybe move to a header in include/video along with the other constants mentioned above ? > + if (num > 1) > + resource_init_io_named(pos++, 0x3bf, 0x01, "mda"); > + if (num > 2) > + resource_init_mem_named(pos++, 0xb0000, 0x2000, "mda"); Same for these start addresses. I see that are also used by mdacon_startup() in drivers/video/console/mdacon.c, so some constants defined somewhere might be useful for that console driver too. The comment also applies to all the other start addresses, since I see that those are used by other drivers (i810, vgacon, etc).
Hi Am 29.01.24 um 11:41 schrieb Javier Martinez Canillas: > Thomas Zimmermann <tzimmermann@suse.de> writes: > > Hello Thomas, > >> The plain values as stored in struct screen_info need to be decoded >> before being used. Add helpers that decode the type of video output >> and the framebuffer I/O aperture. >> >> Old or non-x86 systems may not set the type of video directly, but >> only indicate the presence by storing 0x01 in orig_video_isVGA. The >> decoding logic in screen_info_video_type() takes this into account. > > I always disliked how the orig_video_isVGA variable lost its meaning. > >> It then follows similar code in vgacon's vgacon_startup() to detect >> the video type from the given values. >> >> A call to screen_info_resources() returns all known resources of the >> given screen_info. The resources' values have been taken from existing >> code in vgacon and vga16fb. These drivers can later be converted to >> use the new interfaces. >> >> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> >> --- > > Thanks for doing this! It's quite useful to have these helpers, since as > you mention the screen_info data decoding is complex and the variables > used to store the video type and modes are confusing / misleading. > > Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> > > I just have a few comments below: > >> +static inline bool __screen_info_has_ega_gfx(unsigned int mode) >> +{ >> + switch (mode) { >> + case 0x0d: /* 320x200-4 */ >> + case 0x0e: /* 640x200-4 */ >> + case 0x0f: /* 640x350-1 */ >> + case 0x10: /* 640x350-4 */ > > I wonder if makes sense to define some constant macros for these modes? I > know that check_mode_supported() in drivers/video/fbdev/vga16fb.c also use > magic numbers but I believe that it could ease readability. They are known by their numbers, but have no names. There's also no common practice or precedence I'm aware of. OTOH, drivers like vga16fb should no longer have to test magic numbers at all. They bind to a certain type of device, such as ega-txt and vga-gfx, which implies a correctly set mode. > >> + return true; >> + default: >> + return false; >> + } >> +} >> + >> +static inline bool __screen_info_has_vga_gfx(unsigned int mode) >> +{ >> + switch (mode) { >> + case 0x10: /* 640x480-1 */ >> + case 0x12: /* 640x480-4 */ >> + case 0x13: /* 320-200-8 */ >> + case 0x6a: /* 800x600-4 (VESA) */ >> + return true; > > And same for these. > > It can be a follow-up patch though. > > [...] > >> +int screen_info_resources(const struct screen_info *si, struct resource *r, size_t num) >> +{ >> + struct resource *pos = r; >> + unsigned int type = screen_info_video_type(si); >> + u64 base, size; >> + >> + switch (type) { >> + case VIDEO_TYPE_MDA: >> + if (num > 0) >> + resource_init_io_named(pos++, 0x3b0, 12, "mda"); > > I see that drivers/video/fbdev/i740_reg.h has a #define MDA_BASE > 0x3B0. Maybe move to a header in include/video along with the other > constants mentioned above ? That could go into <video/vga.h>. MDA_BASE (and CGA_BASE) from the same file are unused though. Best regards Thomas > >> + if (num > 1) >> + resource_init_io_named(pos++, 0x3bf, 0x01, "mda"); >> + if (num > 2) >> + resource_init_mem_named(pos++, 0xb0000, 0x2000, "mda"); > > Same for these start addresses. I see that are also used by mdacon_startup() > in drivers/video/console/mdacon.c, so some constants defined somewhere might > be useful for that console driver too. > > The comment also applies to all the other start addresses, since I see > that those are used by other drivers (i810, vgacon, etc). >
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 4a98a859d44d..deba323178cc 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -191,6 +191,7 @@ config MTK_ADSP_IPC config SYSFB bool select BOOT_VESA_SUPPORT + select SCREEN_INFO config SYSFB_SIMPLEFB bool "Mark VGA/VBE/EFI FB as generic system framebuffer" diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index b694d7669d32..1eb755a94940 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -11,6 +11,10 @@ config APERTURE_HELPERS Support tracking and hand-over of aperture ownership. Required by graphics drivers for firmware-provided framebuffers. +config SCREEN_INFO + bool + default n + config STI_CORE bool depends on PARISC diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 6bbc03950899..b929b664d52c 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -1,12 +1,15 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_APERTURE_HELPERS) += aperture.o +obj-$(CONFIG_SCREEN_INFO) += screen_info.o obj-$(CONFIG_STI_CORE) += sticore.o obj-$(CONFIG_VGASTATE) += vgastate.o obj-$(CONFIG_VIDEO_CMDLINE) += cmdline.o obj-$(CONFIG_VIDEO_NOMODESET) += nomodeset.o obj-$(CONFIG_HDMI) += hdmi.o +screen_info-y := screen_info_generic.o + obj-$(CONFIG_VT) += console/ obj-$(CONFIG_FB_STI) += console/ obj-$(CONFIG_LOGO) += logo/ diff --git a/drivers/video/screen_info_generic.c b/drivers/video/screen_info_generic.c new file mode 100644 index 000000000000..4be26941b2d9 --- /dev/null +++ b/drivers/video/screen_info_generic.c @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/export.h> +#include <linux/ioport.h> +#include <linux/screen_info.h> +#include <linux/string.h> + +static void resource_init_named(struct resource *r, + resource_size_t start, resource_size_t size, + const char *name, unsigned int flags) +{ + memset(r, 0, sizeof(*r)); + + r->start = start; + r->end = start + size - 1; + r->name = name; + r->flags = flags; +} + +static void resource_init_io_named(struct resource *r, + resource_size_t start, resource_size_t size, + const char *name) +{ + resource_init_named(r, start, size, name, IORESOURCE_IO); +} + +static void resource_init_mem_named(struct resource *r, + resource_size_t start, resource_size_t size, + const char *name) +{ + resource_init_named(r, start, size, name, IORESOURCE_MEM); +} + +static inline bool __screen_info_has_ega_gfx(unsigned int mode) +{ + switch (mode) { + case 0x0d: /* 320x200-4 */ + case 0x0e: /* 640x200-4 */ + case 0x0f: /* 640x350-1 */ + case 0x10: /* 640x350-4 */ + return true; + default: + return false; + } +} + +static inline bool __screen_info_has_vga_gfx(unsigned int mode) +{ + switch (mode) { + case 0x10: /* 640x480-1 */ + case 0x12: /* 640x480-4 */ + case 0x13: /* 320-200-8 */ + case 0x6a: /* 800x600-4 (VESA) */ + return true; + default: + return __screen_info_has_ega_gfx(mode); + } +} + +/** + * screen_info_resources() - Get resources from screen_info structure + * @si: the screen_info + * @r: pointer to an array of resource structures + * @num: number of elements in @r: + * + * Returns: + * The number of resources stored in @r on success, or a negative errno code otherwise. + * + * A call to screen_info_resources() returns the resources consumed by the + * screen_info's device or framebuffer. The result is stored in the caller-supplied + * array @r with up to @num elements. The function returns the number of + * initialized elements. + */ +int screen_info_resources(const struct screen_info *si, struct resource *r, size_t num) +{ + struct resource *pos = r; + unsigned int type = screen_info_video_type(si); + u64 base, size; + + switch (type) { + case VIDEO_TYPE_MDA: + if (num > 0) + resource_init_io_named(pos++, 0x3b0, 12, "mda"); + if (num > 1) + resource_init_io_named(pos++, 0x3bf, 0x01, "mda"); + if (num > 2) + resource_init_mem_named(pos++, 0xb0000, 0x2000, "mda"); + break; + case VIDEO_TYPE_CGA: + if (num > 0) + resource_init_io_named(pos++, 0x3d4, 0x02, "cga"); + if (num > 1) + resource_init_mem_named(pos++, 0xb8000, 0x2000, "cga"); + break; + case VIDEO_TYPE_EGAM: + if (num > 0) + resource_init_io_named(pos++, 0x3bf, 0x10, "ega"); + if (num > 1) + resource_init_mem_named(pos++, 0xb0000, 0x8000, "ega"); + break; + case VIDEO_TYPE_EGAC: + if (num > 0) + resource_init_io_named(pos++, 0x3c0, 0x20, "ega"); + if (num > 1) { + if (__screen_info_has_ega_gfx(si->orig_video_mode)) + resource_init_mem_named(pos++, 0xa0000, 0x10000, "ega"); + else + resource_init_mem_named(pos++, 0xb8000, 0x8000, "ega"); + } + break; + case VIDEO_TYPE_VGAC: + if (num > 0) + resource_init_io_named(pos++, 0x3c0, 0x20, "vga+"); + if (num > 1) { + if (__screen_info_has_vga_gfx(si->orig_video_mode)) + resource_init_mem_named(pos++, 0xa0000, 0x10000, "vga+"); + else + resource_init_mem_named(pos++, 0xb8000, 0x8000, "vga+"); + } + break; + case VIDEO_TYPE_VLFB: + case VIDEO_TYPE_EFI: + if (!__screen_info_has_lfb(type)) + break; + base = __screen_info_lfb_base(si); + if (!base) + break; + size = __screen_info_lfb_size(si, type); + if (!size) + break; + if (num > 0) + resource_init_mem_named(pos++, base, size, "lfb"); + break; + case VIDEO_TYPE_PICA_S3: + case VIDEO_TYPE_MIPS_G364: + case VIDEO_TYPE_SGI: + case VIDEO_TYPE_TGAC: + case VIDEO_TYPE_SUN: + case VIDEO_TYPE_SUNPCI: + case VIDEO_TYPE_PMAC: + default: + /* not supported */ + return -EINVAL; + } + + return pos - r; +} +EXPORT_SYMBOL(screen_info_resources); diff --git a/include/linux/screen_info.h b/include/linux/screen_info.h index eab7081392d5..d4d45395df19 100644 --- a/include/linux/screen_info.h +++ b/include/linux/screen_info.h @@ -4,6 +4,106 @@ #include <uapi/linux/screen_info.h> +/** + * SCREEN_INFO_MAX_RESOURCES - maximum number of resources per screen_info + */ +#define SCREEN_INFO_MAX_RESOURCES 3 + +struct resource; + +static inline bool __screen_info_has_lfb(unsigned int type) +{ + return (type == VIDEO_TYPE_VLFB) || (type == VIDEO_TYPE_EFI); +} + +static inline u64 __screen_info_lfb_base(const struct screen_info *si) +{ + u64 lfb_base = si->lfb_base; + + if (si->capabilities & VIDEO_CAPABILITY_64BIT_BASE) + lfb_base |= (u64)si->ext_lfb_base << 32; + + return lfb_base; +} + +static inline u64 __screen_info_lfb_size(const struct screen_info *si, unsigned int type) +{ + u64 lfb_size = si->lfb_size; + + if (type == VIDEO_TYPE_VLFB) + lfb_size <<= 16; + return lfb_size; +} + +static inline unsigned int __screen_info_video_type(unsigned int type) +{ + switch (type) { + case VIDEO_TYPE_MDA: + case VIDEO_TYPE_CGA: + case VIDEO_TYPE_EGAM: + case VIDEO_TYPE_EGAC: + case VIDEO_TYPE_VGAC: + case VIDEO_TYPE_VLFB: + case VIDEO_TYPE_PICA_S3: + case VIDEO_TYPE_MIPS_G364: + case VIDEO_TYPE_SGI: + case VIDEO_TYPE_TGAC: + case VIDEO_TYPE_SUN: + case VIDEO_TYPE_SUNPCI: + case VIDEO_TYPE_PMAC: + case VIDEO_TYPE_EFI: + return type; + default: + return 0; + } +} + +/** + * screen_info_video_type() - Decodes the video type from struct screen_info + * @si: an instance of struct screen_info + * + * Returns: + * A VIDEO_TYPE_ constant representing si's type of video display, or 0 otherwise. + */ +static inline unsigned int screen_info_video_type(const struct screen_info *si) +{ + unsigned int type; + + // check if display output is on + if (!si->orig_video_isVGA) + return 0; + + // check for a known VIDEO_TYPE_ constant + type = __screen_info_video_type(si->orig_video_isVGA); + if (type) + return si->orig_video_isVGA; + + // check if text mode has been initialized + if (!si->orig_video_lines || !si->orig_video_cols) + return 0; + + // 80x25 text, mono + if (si->orig_video_mode == 0x07) { + if ((si->orig_video_ega_bx & 0xff) != 0x10) + return VIDEO_TYPE_EGAM; + else + return VIDEO_TYPE_MDA; + } + + // EGA/VGA, 16 colors + if ((si->orig_video_ega_bx & 0xff) != 0x10) { + if (si->orig_video_isVGA) + return VIDEO_TYPE_VGAC; + else + return VIDEO_TYPE_EGAC; + } + + // the rest... + return VIDEO_TYPE_CGA; +} + +int screen_info_resources(const struct screen_info *si, struct resource *r, size_t num); + extern struct screen_info screen_info; #endif /* _SCREEN_INFO_H */
The plain values as stored in struct screen_info need to be decoded before being used. Add helpers that decode the type of video output and the framebuffer I/O aperture. Old or non-x86 systems may not set the type of video directly, but only indicate the presence by storing 0x01 in orig_video_isVGA. The decoding logic in screen_info_video_type() takes this into account. It then follows similar code in vgacon's vgacon_startup() to detect the video type from the given values. A call to screen_info_resources() returns all known resources of the given screen_info. The resources' values have been taken from existing code in vgacon and vga16fb. These drivers can later be converted to use the new interfaces. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> --- drivers/firmware/Kconfig | 1 + drivers/video/Kconfig | 4 + drivers/video/Makefile | 3 + drivers/video/screen_info_generic.c | 148 ++++++++++++++++++++++++++++ include/linux/screen_info.h | 100 +++++++++++++++++++ 5 files changed, 256 insertions(+) create mode 100644 drivers/video/screen_info_generic.c