| Message ID | 20220727045035.32225-2-rex-bc.chen@mediatek.com |
|---|---|
| State | New |
| Headers | show |
| Series | drm/mediatek: Add MT8195 DisplayPort driver | expand |
On 27/07/2022 06:50, Bo-Chen Chen wrote: > From: Markus Schneider-Pargmann <msp@baylibre.com> > > This controller is present on several mediatek hardware. Currently > mt8195 and mt8395 have this controller without a functional difference, > so only one compatible field is added. > > The controller can have two forms, as a normal display port and as an > embedded display port. > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> > --- > .../display/mediatek/mediatek,dp.yaml | 117 ++++++++++++++++++ > 1 file changed, 117 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml > > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml > new file mode 100644 > index 000000000000..fd68c6c08df3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml > @@ -0,0 +1,117 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek Display Port Controller > + > +maintainers: > + - Chun-Kuang Hu <chunkuang.hu@kernel.org> > + - Jitao shi <jitao.shi@mediatek.com> > + > +description: | > + Device tree bindings for the MediaTek display port TX (DP) and > + embedded display port TX (eDP) controller present on some MediaTek SoCs. Drop entire sentence and just describe the hardware. > + We just need to enable the power domain of DP. The clock of DP is > + generated by itself and we are not using other PLL to generate clocks. > + MediaTek DP and eDP are different hardwares and there are some features > + which are not supported for eDP. For example, audio is not supported for > + eDP. Therefore, we need to use two different compatibles to describe them. > + > +properties: > + compatible: > + enum: > + - mediatek,mt8195-dp-tx > + - mediatek,mt8195-edp-tx > + > + reg: > + maxItems: 1 > + > + nvmem-cells: > + maxItems: 1 > + description: efuse data for display port calibration > + > + nvmem-cell-names: > + const: dp_calibration_data > + > + power-domains: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: Input endpoint of the controller, usually dp_intf > + > + port@1: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: Output endpoint of the controller > + properties: > + endpoint: > + $ref: /schemas/media/video-interfaces.yaml# > + unevaluatedProperties: false > + properties: > + data-lanes: > + description: | > + number of lanes supported by the hardware. > + The possible values: > + 0 - For 1 lane enabled in IP. > + 0 1 - For 2 lanes enabled in IP. > + 0 1 2 3 - For 4 lanes enabled in IP. > + minItems: 1 > + maxItems: 4 > + required: > + - data-lanes > + > + required: > + - port@0 > + - port@1 > + > + max-linkrate-mhz: > + enum: [ 1620, 2700, 5400, 8100 ] > + description: maximum link rate supported by the hardware. > + > +required: > + - compatible > + - reg > + - interrupts > + - ports > + - max-linkrate-mhz > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/power/mt8195-power.h> > + dp_tx@1c600000 { No underscores in node names, so just "dp". Best regards, Krzysztof
On Wed, 2022-07-27 at 09:23 +0200, Krzysztof Kozlowski wrote: > On 27/07/2022 06:50, Bo-Chen Chen wrote: > > From: Markus Schneider-Pargmann <msp@baylibre.com> > > > > This controller is present on several mediatek hardware. Currently > > mt8195 and mt8395 have this controller without a functional > > difference, > > so only one compatible field is added. > > > > The controller can have two forms, as a normal display port and as > > an > > embedded display port. > > > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> > > --- > > .../display/mediatek/mediatek,dp.yaml | 117 > > ++++++++++++++++++ > > 1 file changed, 117 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml > > > > diff --git > > a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.ya > > ml > > b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.ya > > ml > > new file mode 100644 > > index 000000000000..fd68c6c08df3 > > --- /dev/null > > +++ > > b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.ya > > ml > > @@ -0,0 +1,117 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: > > https://urldefense.com/v3/__http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml*__;Iw!!CTRNKA9wMg0ARbw!wfsojIGZI_UYOhzgZxHy9ndUMC78GcAtJV-oZkD4DNXz0NE58uCHPE_MRZIyljEjrpwP$ > > > > +$schema: > > https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!wfsojIGZI_UYOhzgZxHy9ndUMC78GcAtJV-oZkD4DNXz0NE58uCHPE_MRZIylldgseRE$ > > > > + > > +title: MediaTek Display Port Controller > > + > > +maintainers: > > + - Chun-Kuang Hu <chunkuang.hu@kernel.org> > > + - Jitao shi <jitao.shi@mediatek.com> > > + > > +description: | > > + Device tree bindings for the MediaTek display port TX (DP) and > > + embedded display port TX (eDP) controller present on some > > MediaTek SoCs. > > Drop entire sentence and just describe the hardware. > > > + We just need to enable the power domain of DP. The clock of DP > > is > > + generated by itself and we are not using other PLL to generate > > clocks. > > + MediaTek DP and eDP are different hardwares and there are some > > features > > + which are not supported for eDP. For example, audio is not > > supported for > > + eDP. Therefore, we need to use two different compatibles to > > describe them. > > + > > +properties: > > + compatible: > > + enum: > > + - mediatek,mt8195-dp-tx > > + - mediatek,mt8195-edp-tx > > + > > + reg: > > + maxItems: 1 > > + > > + nvmem-cells: > > + maxItems: 1 > > + description: efuse data for display port calibration > > + > > + nvmem-cell-names: > > + const: dp_calibration_data > > + > > + power-domains: > > + maxItems: 1 > > + > > + interrupts: > > + maxItems: 1 > > + > > + ports: > > + $ref: /schemas/graph.yaml#/properties/ports > > + properties: > > + port@0: > > + $ref: /schemas/graph.yaml#/properties/port > > + description: Input endpoint of the controller, usually > > dp_intf > > + > > + port@1: > > + $ref: /schemas/graph.yaml#/$defs/port-base > > + unevaluatedProperties: false > > + description: Output endpoint of the controller > > + properties: > > + endpoint: > > + $ref: /schemas/media/video-interfaces.yaml# > > + unevaluatedProperties: false > > + properties: > > + data-lanes: > > + description: | > > + number of lanes supported by the hardware. > > + The possible values: > > + 0 - For 1 lane enabled in IP. > > + 0 1 - For 2 lanes enabled in IP. > > + 0 1 2 3 - For 4 lanes enabled in IP. > > + minItems: 1 > > + maxItems: 4 > > + required: > > + - data-lanes > > + > > + required: > > + - port@0 > > + - port@1 > > + > > + max-linkrate-mhz: > > + enum: [ 1620, 2700, 5400, 8100 ] > > + description: maximum link rate supported by the hardware. > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + - ports > > + - max-linkrate-mhz > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > + #include <dt-bindings/power/mt8195-power.h> > > + dp_tx@1c600000 { > > No underscores in node names, so just "dp". > > Best regards, > Krzysztof Hello Krzysztof, Thanks for your review. I will modify these in next version. BRs, Bo-Chen
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml new file mode 100644 index 000000000000..fd68c6c08df3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Display Port Controller + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + Device tree bindings for the MediaTek display port TX (DP) and + embedded display port TX (eDP) controller present on some MediaTek SoCs. + We just need to enable the power domain of DP. The clock of DP is + generated by itself and we are not using other PLL to generate clocks. + MediaTek DP and eDP are different hardwares and there are some features + which are not supported for eDP. For example, audio is not supported for + eDP. Therefore, we need to use two different compatibles to describe them. + +properties: + compatible: + enum: + - mediatek,mt8195-dp-tx + - mediatek,mt8195-edp-tx + + reg: + maxItems: 1 + + nvmem-cells: + maxItems: 1 + description: efuse data for display port calibration + + nvmem-cell-names: + const: dp_calibration_data + + power-domains: + maxItems: 1 + + interrupts: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input endpoint of the controller, usually dp_intf + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Output endpoint of the controller + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + properties: + data-lanes: + description: | + number of lanes supported by the hardware. + The possible values: + 0 - For 1 lane enabled in IP. + 0 1 - For 2 lanes enabled in IP. + 0 1 2 3 - For 4 lanes enabled in IP. + minItems: 1 + maxItems: 4 + required: + - data-lanes + + required: + - port@0 + - port@1 + + max-linkrate-mhz: + enum: [ 1620, 2700, 5400, 8100 ] + description: maximum link rate supported by the hardware. + +required: + - compatible + - reg + - interrupts + - ports + - max-linkrate-mhz + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/mt8195-power.h> + dp_tx@1c600000 { + compatible = "mediatek,mt8195-dp-tx"; + reg = <0x1c600000 0x8000>; + power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>; + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>; + max-linkrate-mhz = <8100>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dptx_in: endpoint { + remote-endpoint = <&dp_intf0_out>; + }; + }; + port@1 { + reg = <1>; + dptx_out: endpoint { + data-lanes = <0 1 2 3>; + }; + }; + }; + };