@@ -1417,7 +1417,7 @@ execution context provided by the EFI firmware.
The function prototype for the handover entry point looks like this::
- efi_main(void *handle, efi_system_table_t *table, struct boot_params *bp)
+ efi_stub_entry(void *handle, efi_system_table_t *table, struct boot_params *bp)
'handle' is the EFI image handle passed to the boot loader by the EFI
firmware, 'table' is the EFI system table - these are the first two
@@ -26,8 +26,8 @@
* When booting in 64-bit mode on 32-bit EFI firmware, startup_64_mixed_mode()
* is the first thing that runs after switching to long mode. Depending on
* whether the EFI handover protocol or the compat entry point was used to
- * enter the kernel, it will either branch to the 64-bit EFI handover
- * entrypoint at offset 0x390 in the image, or to the 64-bit EFI PE/COFF
+ * enter the kernel, it will either branch to the common 64-bit EFI stub
+ * entrypoint efi_stub_entry() directly, or via the 64-bit EFI PE/COFF
* entrypoint efi_pe_entry(). In the former case, the bootloader must provide a
* struct bootparams pointer as the third argument, so the presence of such a
* pointer is used to disambiguate.
@@ -37,21 +37,23 @@
* | efi32_pe_entry |---->| | | +-----------+--+
* +------------------+ | | +------+----------------+ |
* | startup_32 |---->| startup_64_mixed_mode | |
- * +------------------+ | | +------+----------------+ V
- * | efi32_stub_entry |---->| | | +------------------+
- * +------------------+ +------------+ +---->| efi64_stub_entry |
- * +-------------+----+
- * +------------+ +----------+ |
- * | startup_64 |<----| efi_main |<--------------+
- * +------------+ +----------+
+ * +------------------+ | | +------+----------------+ |
+ * | efi32_stub_entry |---->| | | |
+ * +------------------+ +------------+ | |
+ * V |
+ * +------------+ +----------------+ |
+ * | startup_64 |<----| efi_stub_entry |<--------+
+ * +------------+ +----------------+
*/
SYM_FUNC_START(startup_64_mixed_mode)
lea efi32_boot_args(%rip), %rdx
mov 0(%rdx), %edi
mov 4(%rdx), %esi
+#ifdef CONFIG_EFI_HANDOVER_PROTOCOL
mov 8(%rdx), %edx // saved bootparams pointer
test %edx, %edx
- jnz efi64_stub_entry
+ jnz efi_stub_entry
+#endif
/*
* efi_pe_entry uses MS calling convention, which requires 32 bytes of
* shadow space on the stack even if all arguments are passed in
@@ -150,17 +150,6 @@ SYM_FUNC_START(startup_32)
jmp *%eax
SYM_FUNC_END(startup_32)
-#ifdef CONFIG_EFI_STUB
-SYM_FUNC_START(efi32_stub_entry)
- add $0x4, %esp
- movl 8(%esp), %esi /* save boot_params pointer */
- call efi_main
- /* efi_main returns the possibly relocated address of startup_32 */
- jmp *%eax
-SYM_FUNC_END(efi32_stub_entry)
-SYM_FUNC_ALIAS(efi_stub_entry, efi32_stub_entry)
-#endif
-
.text
SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
@@ -523,19 +523,11 @@ trampoline_return:
jmp *%rax
SYM_CODE_END(startup_64)
-#ifdef CONFIG_EFI_STUB
-#ifdef CONFIG_EFI_HANDOVER_PROTOCOL
+#if IS_ENABLED(CONFIG_EFI_MIXED) && IS_ENABLED(CONFIG_EFI_HANDOVER_PROTOCOL)
.org 0x390
-#endif
SYM_FUNC_START(efi64_stub_entry)
- and $~0xf, %rsp /* realign the stack */
- movq %rdx, %rbx /* save boot_params pointer */
- call efi_main
- movq %rbx,%rsi
- leaq rva(startup_64)(%rax), %rax
- jmp *%rax
+ jmp efi_stub_entry
SYM_FUNC_END(efi64_stub_entry)
-SYM_FUNC_ALIAS(efi_stub_entry, efi64_stub_entry)
#endif
.text
@@ -817,9 +817,9 @@ static void __noreturn enter_kernel(unsigned long kernel_addr,
* return. On failure, it will exit to the firmware via efi_exit() instead of
* returning.
*/
-asmlinkage unsigned long efi_main(efi_handle_t handle,
- efi_system_table_t *sys_table_arg,
- struct boot_params *boot_params)
+void __noreturn efi_stub_entry(efi_handle_t handle,
+ efi_system_table_t *sys_table_arg,
+ struct boot_params *boot_params)
{
unsigned long bzimage_addr = (unsigned long)startup_32;
unsigned long buffer_start, buffer_end;
@@ -965,7 +965,19 @@ asmlinkage unsigned long efi_main(efi_handle_t handle,
enter_kernel(bzimage_addr, boot_params);
fail:
- efi_err("efi_main() failed!\n");
+ efi_err("efi_stub_entry() failed!\n");
efi_exit(handle, status);
}
+
+#ifdef CONFIG_EFI_HANDOVER_PROTOCOL
+#ifndef CONFIG_EFI_MIXED
+extern __alias(efi_stub_entry)
+void efi32_stub_entry(efi_handle_t handle, efi_system_table_t *sys_table_arg,
+ struct boot_params *boot_params);
+
+extern __alias(efi_stub_entry)
+void efi64_stub_entry(efi_handle_t handle, efi_system_table_t *sys_table_arg,
+ struct boot_params *boot_params);
+#endif
+#endif
Now that the EFI entry code in assembler is only used by the optional and deprecated EFI handover protocol, and given that the EFI stub C code no longer returns to it, most of it can simply be dropped. While at it, clarify the symbol naming, by merging efi_main() and efi_stub_entry(), making the latter the shared entry point for all different boot modes that enter via the EFI stub. The efi32_stub_entry() and efi64_stub_entry() names are referenced explicitly by the tooling that populates the setup header, so these must be retained, but can be emitted as aliases of efi_stub_entry() where appropriate. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> --- Documentation/arch/x86/boot.rst | 2 +- arch/x86/boot/compressed/efi_mixed.S | 22 +++++++++++--------- arch/x86/boot/compressed/head_32.S | 11 ---------- arch/x86/boot/compressed/head_64.S | 12 ++--------- drivers/firmware/efi/libstub/x86-stub.c | 20 ++++++++++++++---- 5 files changed, 31 insertions(+), 36 deletions(-)