diff mbox series

[v5,11/20] x86/decompressor: Only call the trampoline when changing paging levels

Message ID 20230607072342.4054036-12-ardb@kernel.org
State Superseded
Headers show
Series efi/x86: Avoid bare metal decompressor during EFI boot | expand

Commit Message

Ard Biesheuvel June 7, 2023, 7:23 a.m. UTC 
Since the current and desired number of paging levels are known when the
trampoline is being prepared, avoid calling the trampoline at all if it
is clear that calling it is not going to result in a change to the
number of paging levels. Given that the CPU is already running in long
mode, the PAE and LA57 settings are necessarily consistent with the
currently active page tables - the only difference is that CR4.MCE will
always be preserved in this case, but it will be cleared by the real
kernel startup code if CONFIG_X86_MCE is not enabled.

Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
 arch/x86/boot/compressed/head_64.S    | 21 +-------------------
 arch/x86/boot/compressed/pgtable_64.c | 18 +++++++----------
 2 files changed, 8 insertions(+), 31 deletions(-)
diff mbox series

Patch

diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 3d4da7e5270c8d4d..577173be8ec805cd 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -387,10 +387,6 @@  SYM_CODE_START(startup_64)
 	 * For the trampoline, we need the top page table to reside in lower
 	 * memory as we don't have a way to load 64-bit values into CR3 in
 	 * 32-bit mode.
-	 *
-	 * We go though the trampoline even if we don't have to: if we're
-	 * already in a desired paging mode. This way the trampoline code gets
-	 * tested on every boot.
 	 */
 
 	/* Make sure we have GDT with 32-bit code segment */
@@ -542,25 +538,10 @@  SYM_CODE_START(trampoline_32bit_src)
 	btrl	$X86_CR0_PG_BIT, %eax
 	movl	%eax, %cr0
 
-	/* Check what paging mode we want to be in after the trampoline */
-	testl	%esi, %esi
-	jz	1f
-
-	/* We want 5-level paging: don't touch CR3 if it already points to 5-level page tables */
-	movl	%cr4, %eax
-	testl	$X86_CR4_LA57, %eax
-	jnz	3f
-	jmp	2f
-1:
-	/* We want 4-level paging: don't touch CR3 if it already points to 4-level page tables */
-	movl	%cr4, %eax
-	testl	$X86_CR4_LA57, %eax
-	jz	3f
-2:
 	/* Point CR3 to the trampoline's new top level page table */
 	leal	TRAMPOLINE_32BIT_PGTABLE_OFFSET(%edi), %eax
 	movl	%eax, %cr3
-3:
+
 	/* Set EFER.LME=1 as a precaution in case hypervsior pulls the rug */
 	movl	$MSR_EFER, %ecx
 	rdmsr
diff --git a/arch/x86/boot/compressed/pgtable_64.c b/arch/x86/boot/compressed/pgtable_64.c
index 1d28ad95ea839531..5b15d823e7010650 100644
--- a/arch/x86/boot/compressed/pgtable_64.c
+++ b/arch/x86/boot/compressed/pgtable_64.c
@@ -128,6 +128,13 @@  asmlinkage void set_paging_levels(void *rmode)
 		l5_required = true;
 	}
 
+	/*
+	 * The trampoline will not be used if the paging mode is already set to
+	 * the desired one.
+	 */
+	if (l5_required == !!(native_read_cr4() & X86_CR4_LA57))
+		return;
+
 	trampoline_32bit = (unsigned long *)find_trampoline_placement();
 
 	/* Preserve trampoline memory */
@@ -155,18 +162,8 @@  asmlinkage void set_paging_levels(void *rmode)
 	 *
 	 * The new page table will be used by trampoline code for switching
 	 * from 4- to 5-level paging or vice versa.
-	 *
-	 * If switching is not required, the page table is unused: trampoline
-	 * code wouldn't touch CR3.
 	 */
 
-	/*
-	 * We are not going to use the page table in trampoline memory if we
-	 * are already in the desired paging mode.
-	 */
-	if (l5_required == !!(native_read_cr4() & X86_CR4_LA57))
-		goto out;
-
 	if (l5_required) {
 		/*
 		 * For 4- to 5-level paging transition, set up current CR3 as
@@ -189,7 +186,6 @@  asmlinkage void set_paging_levels(void *rmode)
 		       (void *)src, PAGE_SIZE);
 	}
 
-out:
 	toggle_la57(trampoline_32bit, l5_required);
 }