@@ -212,6 +212,26 @@ static inline u64 rd_sev_status_msr(void)
return ((high << 32) | low);
}
+static void enforce_vmpl0(void)
+{
+ u64 attrs;
+ int err;
+
+ /*
+ * RMPADJUST modifies RMP permissions of a lesser-privileged (numerically
+ * higher) privilege level. Here, clear the VMPL1 permission mask of the
+ * GHCB page. If the guest is not running at VMPL0, this will fail.
+ *
+ * If the guest is running at VMPL0, it will succeed. Even if that operation
+ * modifies permission bits, it is still ok to do currently because Linux
+ * SEV-SNP guests are supported only on VMPL0 so VMPL1 or higher permission
+ * masks changing is a don't-care.
+ */
+ attrs = 1;
+ if (rmpadjust((unsigned long)&boot_ghcb_page, RMP_PG_SIZE_4K, attrs))
+ sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_NOT_VMPL0);
+}
+
void sev_enable(struct boot_params *bp)
{
unsigned int eax, ebx, ecx, edx;
@@ -252,10 +272,14 @@ void sev_enable(struct boot_params *bp)
/*
* SEV-SNP is supported in v2 of the GHCB spec which mandates support for HV
* features. If SEV-SNP is enabled, then check if the hypervisor supports
- * the SEV-SNP features.
+ * the SEV-SNP features and is launched at VMPL0 level.
*/
- if (sev_status & MSR_AMD64_SEV_SNP_ENABLED && !(get_hv_features() & GHCB_HV_FT_SNP))
- sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SNP_UNSUPPORTED);
+ if (sev_status & MSR_AMD64_SEV_SNP_ENABLED) {
+ if (!(get_hv_features() & GHCB_HV_FT_SNP))
+ sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SNP_UNSUPPORTED);
+
+ enforce_vmpl0();
+ }
sme_me_mask = BIT_ULL(ebx & 0x3f);
}
@@ -89,6 +89,7 @@
#define GHCB_TERM_REGISTER 0 /* GHCB GPA registration failure */
#define GHCB_TERM_PSC 1 /* Page State Change failure */
#define GHCB_TERM_PVALIDATE 2 /* Pvalidate failure */
+#define GHCB_TERM_NOT_VMPL0 3 /* SEV-SNP guest is not running at VMPL-0 */
#define GHCB_RESP_CODE(v) ((v) & GHCB_MSR_INFO_MASK)
@@ -63,6 +63,9 @@ extern bool handle_vc_boot_ghcb(struct pt_regs *regs);
/* Software defined (when rFlags.CF = 1) */
#define PVALIDATE_FAIL_NOUPDATE 255
+/* RMP page size */
+#define RMP_PG_SIZE_4K 0
+
#ifdef CONFIG_AMD_MEM_ENCRYPT
extern struct static_key_false sev_es_enable_key;
extern void __sev_es_ist_enter(struct pt_regs *regs);
@@ -90,6 +93,18 @@ extern enum es_result sev_es_ghcb_hv_call(struct ghcb *ghcb,
struct es_em_ctxt *ctxt,
u64 exit_code, u64 exit_info_1,
u64 exit_info_2);
+static inline int rmpadjust(unsigned long vaddr, bool rmp_psize, unsigned long attrs)
+{
+ int rc;
+
+ /* "rmpadjust" mnemonic support in binutils 2.36 and newer */
+ asm volatile(".byte 0xF3,0x0F,0x01,0xFE\n\t"
+ : "=a"(rc)
+ : "a"(vaddr), "c"(rmp_psize), "d"(attrs)
+ : "memory", "cc");
+
+ return rc;
+}
static inline int pvalidate(unsigned long vaddr, bool rmp_psize, bool validate)
{
bool no_rmpupdate;
@@ -114,6 +129,7 @@ static inline int sev_es_setup_ap_jump_table(struct real_mode_header *rmh) { ret
static inline void sev_es_nmi_complete(void) { }
static inline int sev_es_efi_map_ghcbs(pgd_t *pgd) { return 0; }
static inline int pvalidate(unsigned long vaddr, bool rmp_psize, bool validate) { return 0; }
+static inline int rmpadjust(unsigned long vaddr, bool rmp_psize, unsigned long attrs) { return 0; }
#endif
#endif
Virtual Machine Privilege Level (VMPL) feature in the SEV-SNP architecture allows a guest VM to divide its address space into four levels. The level can be used to provide the hardware isolated abstraction layers with a VM. The VMPL0 is the highest privilege, and VMPL3 is the least privilege. Certain operations must be done by the VMPL0 software, such as: * Validate or invalidate memory range (PVALIDATE instruction) * Allocate VMSA page (RMPADJUST instruction when VMSA=1) The initial SEV-SNP support requires that the guest kernel is running on VMPL0. Add a check to make sure that kernel is running at VMPL0 before continuing the boot. There is no easy method to query the current VMPL level, so use the RMPADJUST instruction to determine whether the guest is running at the VMPL0. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> --- arch/x86/boot/compressed/sev.c | 30 +++++++++++++++++++++++++++--- arch/x86/include/asm/sev-common.h | 1 + arch/x86/include/asm/sev.h | 16 ++++++++++++++++ 3 files changed, 44 insertions(+), 3 deletions(-)