@@ -239,6 +239,7 @@ void ghes_edac_report_mem_error(int sev, struct cper_sec_mem_err *mem_err)
{
struct edac_raw_error_desc *e;
struct mem_ctl_info *mci;
+ struct cper_mem_err_compact cmem;
struct ghes_pvt *pvt;
unsigned long flags;
char *p;
@@ -292,60 +293,10 @@ void ghes_edac_report_mem_error(int sev, struct cper_sec_mem_err *mem_err)
/* Error type, mapped on e->msg */
if (mem_err->validation_bits & CPER_MEM_VALID_ERROR_TYPE) {
+ u8 etype = mem_err->error_type;
+
p = pvt->msg;
- switch (mem_err->error_type) {
- case 0:
- p += sprintf(p, "Unknown");
- break;
- case 1:
- p += sprintf(p, "No error");
- break;
- case 2:
- p += sprintf(p, "Single-bit ECC");
- break;
- case 3:
- p += sprintf(p, "Multi-bit ECC");
- break;
- case 4:
- p += sprintf(p, "Single-symbol ChipKill ECC");
- break;
- case 5:
- p += sprintf(p, "Multi-symbol ChipKill ECC");
- break;
- case 6:
- p += sprintf(p, "Master abort");
- break;
- case 7:
- p += sprintf(p, "Target abort");
- break;
- case 8:
- p += sprintf(p, "Parity Error");
- break;
- case 9:
- p += sprintf(p, "Watchdog timeout");
- break;
- case 10:
- p += sprintf(p, "Invalid address");
- break;
- case 11:
- p += sprintf(p, "Mirror Broken");
- break;
- case 12:
- p += sprintf(p, "Memory Sparing");
- break;
- case 13:
- p += sprintf(p, "Scrub corrected error");
- break;
- case 14:
- p += sprintf(p, "Scrub uncorrected error");
- break;
- case 15:
- p += sprintf(p, "Physical Memory Map-out event");
- break;
- default:
- p += sprintf(p, "reserved error (%d)",
- mem_err->error_type);
- }
+ p += snprintf(p, sizeof(pvt->msg), "%s", cper_mem_err_type_str(etype));
} else {
strcpy(pvt->msg, "unknown error");
}
@@ -362,42 +313,13 @@ void ghes_edac_report_mem_error(int sev, struct cper_sec_mem_err *mem_err)
/* Memory error location, mapped on e->location */
p = e->location;
- if (mem_err->validation_bits & CPER_MEM_VALID_NODE)
- p += sprintf(p, "node:%d ", mem_err->node);
- if (mem_err->validation_bits & CPER_MEM_VALID_CARD)
- p += sprintf(p, "card:%d ", mem_err->card);
- if (mem_err->validation_bits & CPER_MEM_VALID_MODULE)
- p += sprintf(p, "module:%d ", mem_err->module);
- if (mem_err->validation_bits & CPER_MEM_VALID_RANK_NUMBER)
- p += sprintf(p, "rank:%d ", mem_err->rank);
- if (mem_err->validation_bits & CPER_MEM_VALID_BANK)
- p += sprintf(p, "bank:%d ", mem_err->bank);
- if (mem_err->validation_bits & CPER_MEM_VALID_BANK_GROUP)
- p += sprintf(p, "bank_group:%d ",
- mem_err->bank >> CPER_MEM_BANK_GROUP_SHIFT);
- if (mem_err->validation_bits & CPER_MEM_VALID_BANK_ADDRESS)
- p += sprintf(p, "bank_address:%d ",
- mem_err->bank & CPER_MEM_BANK_ADDRESS_MASK);
- if (mem_err->validation_bits & (CPER_MEM_VALID_ROW | CPER_MEM_VALID_ROW_EXT)) {
- u32 row = mem_err->row;
-
- row |= cper_get_mem_extension(mem_err->validation_bits, mem_err->extended);
- p += sprintf(p, "row:%d ", row);
- }
- if (mem_err->validation_bits & CPER_MEM_VALID_COLUMN)
- p += sprintf(p, "col:%d ", mem_err->column);
- if (mem_err->validation_bits & CPER_MEM_VALID_BIT_POSITION)
- p += sprintf(p, "bit_pos:%d ", mem_err->bit_pos);
+ cper_mem_err_pack(mem_err, &cmem);
+ p += cper_mem_err_location(&cmem, p);
+
if (mem_err->validation_bits & CPER_MEM_VALID_MODULE_HANDLE) {
- const char *bank = NULL, *device = NULL;
struct dimm_info *dimm;
- dmi_memdev_name(mem_err->mem_dev_handle, &bank, &device);
- if (bank != NULL && device != NULL)
- p += sprintf(p, "DIMM location:%s %s ", bank, device);
- else
- p += sprintf(p, "DIMM DMI handle: 0x%.4x ",
- mem_err->mem_dev_handle);
+ p += cper_dimm_err_location(&cmem, p);
dimm = find_dimm_by_handle(mci, mem_err->mem_dev_handle);
if (dimm) {
@@ -405,9 +327,7 @@ void ghes_edac_report_mem_error(int sev, struct cper_sec_mem_err *mem_err)
strcpy(e->label, dimm->label);
}
}
- if (mem_err->validation_bits & CPER_MEM_VALID_CHIP_ID)
- p += sprintf(p, "chipID: %d ",
- mem_err->extended >> CPER_MEM_CHIP_ID_SHIFT);
+
if (p > e->location)
*(p - 1) = '\0';
@@ -479,15 +399,7 @@ void ghes_edac_report_mem_error(int sev, struct cper_sec_mem_err *mem_err)
break;
}
}
- if (mem_err->validation_bits & CPER_MEM_VALID_REQUESTOR_ID)
- p += sprintf(p, "requestorID: 0x%016llx ",
- (long long)mem_err->requestor_id);
- if (mem_err->validation_bits & CPER_MEM_VALID_RESPONDER_ID)
- p += sprintf(p, "responderID: 0x%016llx ",
- (long long)mem_err->responder_id);
- if (mem_err->validation_bits & CPER_MEM_VALID_TARGET_ID)
- p += sprintf(p, "targetID: 0x%016llx ",
- (long long)mem_err->responder_id);
+
if (p > pvt->other_detail)
*(p - 1) = '\0';
@@ -211,7 +211,7 @@ const char *cper_mem_err_type_str(unsigned int etype)
}
EXPORT_SYMBOL_GPL(cper_mem_err_type_str);
-static int cper_mem_err_location(struct cper_mem_err_compact *mem, char *msg)
+int cper_mem_err_location(struct cper_mem_err_compact *mem, char *msg)
{
u32 len, n;
@@ -265,7 +265,7 @@ static int cper_mem_err_location(struct cper_mem_err_compact *mem, char *msg)
return n;
}
-static int cper_dimm_err_location(struct cper_mem_err_compact *mem, char *msg)
+int cper_dimm_err_location(struct cper_mem_err_compact *mem, char *msg)
{
u32 len, n;
const char *bank = NULL, *device = NULL;
@@ -568,5 +568,7 @@ void cper_print_proc_arm(const char *pfx,
const struct cper_sec_proc_arm *proc);
void cper_print_proc_ia(const char *pfx,
const struct cper_sec_proc_ia *proc);
+int cper_mem_err_location(struct cper_mem_err_compact *mem, char *msg);
+int cper_dimm_err_location(struct cper_mem_err_compact *mem, char *msg);
#endif
The memory error location processing in ghes_edac_report_mem_error() have Duplicated Code with cper_mem_err_location(), cper_dimm_err_location(), and cper_mem_err_type_str() in drivers/firmware/efi/cper.c. To avoid the duplicated code, this patch introduces the above cper_*() into ghes_edac_report_mem_error(). The EDAC error log is now properly reporting the error as follows (all Validation Bits are enabled): [ 375.938411] EDAC MC0: 1 CE single-symbol chipkill ECC on unknown memory (node: 0 card: 0 module: 0 rank: 0 bank: 513 bank_group: 2 bank_address: 1 device: 0 row: 4887 column: 1032 bit_position: 0 requestor_id: 0x0000000000000000 responder_id: 0x0000000000000000 DIMM location: not present. DMI handle: 0x0000 page:0x898b86 offset:0x20 grain:1 syndrome:0x0 - APEI location: node: 0 card: 0 module: 0 rank: 0 bank: 513 bank_group: 2 bank_address: 1 device: 0 row: 4887 column: 1032 bit_position: 0 requestor_id: 0x0000000000000000 responder_id: 0x0000000000000000 DIMM location: not present. DMI handle: 0x0000 status(0x0000000000000000): reserved) [ 375.938416] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 2 [ 375.938417] {2}[Hardware Error]: It has been corrected by h/w and requires no further action [ 375.938418] {2}[Hardware Error]: event severity: corrected [ 375.938419] {2}[Hardware Error]: Error 0, type: corrected [ 375.938420] {2}[Hardware Error]: section_type: memory error [ 375.938421] {2}[Hardware Error]: error_status: 0x0000000000000000 [ 375.938422] {2}[Hardware Error]: physical_address: 0x0000000898b86020 [ 375.938422] {2}[Hardware Error]: physical_address_mask: 0x0000000000000000 [ 375.938426] {2}[Hardware Error]: node: 0 card: 0 module: 0 rank: 0 bank: 513 bank_group: 2 bank_address: 1 device: 0 row: 4887 column: 1032 bit_position: 0 requestor_id: 0x0000000000000000 responder_id: 0x0000000000000000 [ 375.938426] {2}[Hardware Error]: error_type: 4, single-symbol chipkill ECC [ 375.938428] {2}[Hardware Error]: DIMM location: not present. DMI handle: 0x0000 Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> --- drivers/edac/ghes_edac.c | 108 ++++-------------------------------- drivers/firmware/efi/cper.c | 4 +- include/linux/cper.h | 2 + 3 files changed, 14 insertions(+), 100 deletions(-)