| Message ID | f395ffd03a6594ee11975b708721a33ccf8a4871.1653916330.git.hakan.jansson@infineon.com |
|---|---|
| State | Accepted |
| Commit | 0b4de2523f281b0492de3427da82495bfca6f263 |
| Headers | show |
| Series | Bluetooth: hci_bcm: Autobaud mode support | expand |
diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml index 5aac094fd217..0a58d0fbcbc4 100644 --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml @@ -92,6 +92,13 @@ properties: pcm-sync-mode: slave, master pcm-clock-mode: slave, master + brcm,requires-autobaud-mode: + type: boolean + description: + Set this property if autobaud mode is required. Autobaud mode is required + if the device's initial baud rate in normal mode is not supported by the + host or if the device requires autobaud mode startup before loading FW. + interrupts: items: - description: Handle to the line HOST_WAKE used to wake
Add property, "brcm,requires-autobaud-mode", to enable autobaud mode selection. Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading. Autobaud mode can also be required on some boards where the controller device is using a non-standard baud rate when first powered on. Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com> --- V2 -> V3: - Rename DT property and modify description https://lore.kernel.org/linux-devicetree/e6e83743-1441-dc53-fd1f-cdfb9a24932a@linaro.org/ V1 -> V2: - Modify property description .../devicetree/bindings/net/broadcom-bluetooth.yaml | 7 +++++++ 1 file changed, 7 insertions(+)