diff mbox series

[1/3] dt-bindings: iio: Add KX132 accelerometer

Message ID d677b957164930c3d2fee900117795b25b85c3fa.1679009443.git.mehdi.djait.k@gmail.com
State Superseded
Headers show
Series [1/3] dt-bindings: iio: Add KX132 accelerometer | expand

Commit Message

Mehdi Djait March 16, 2023, 11:48 p.m. UTC
Extend the kionix,kx022a.yaml file to support the
kx132 device

Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>
---
 .../bindings/iio/accel/kionix,kx022a.yaml           | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

Comments

Jonathan Cameron March 19, 2023, 3:54 p.m. UTC | #1
On Fri, 17 Mar 2023 00:48:35 +0100
Mehdi Djait <mehdi.djait.k@gmail.com> wrote:

> Extend the kionix,kx022a.yaml file to support the
> kx132 device
> 
> Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>

Pins and power supplies etc all look the same to me so indeed seems that
you have covered all that is needed.  One small comment inline
and I think Matti's point about more specific compatibles probably
needs to be taken into account if there are known variants.

Kionix has done this for a long time. I remember that fun with the
kxsd9 lots of years back - that had lots of subtle variants.

> ---
>  .../bindings/iio/accel/kionix,kx022a.yaml           | 13 ++++++++-----
>  1 file changed, 8 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
> index 986df1a6ff0a..ac1e27402d5e 100644
> --- a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
> @@ -4,19 +4,22 @@
>  $id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml#
>  $schema: http://devicetree.org/meta-schemas/core.yaml#
>  
> -title: ROHM/Kionix KX022A Accelerometer
> +title: ROHM/Kionix KX022A and KX132 Accelerometers
>  
>  maintainers:
>    - Matti Vaittinen <mazziesaccount@gmail.com>
>  
>  description: |
> -  KX022A is a 3-axis accelerometer supporting +/- 2G, 4G, 8G and 16G ranges,
> -  output data-rates from 0.78Hz to 1600Hz and a hardware-fifo buffering.
> -  KX022A can be accessed either via I2C or SPI.
> +  KX022A and KX132 are 3-axis accelerometers supporting +/- 2G, 4G, 8G and
> +  16G ranges, output data-rates from 0.78Hz to 1600Hz and a hardware-fifo

This may be one of those 'there are many versions' of the chip issues, but
the random datasheet I got via digikey (kionix website was slow and I'm
impatient) has max as 25600Hz for the KX132-1211.

No particular reason the sampling rates need to be in this description so
if they are different I'd just remove the mention or just say
"variable output data-rates"

> +  buffering.
> +  KX022A and KX132 can be accessed either via I2C or SPI.
>  
>  properties:
>    compatible:
> -    const: kionix,kx022a
> +    enum:
> +      - kionix,kx022a
> +      - kionix,kx132
>  
>    reg:
>      maxItems: 1
Mehdi Djait March 21, 2023, 1:22 p.m. UTC | #2
Hello Jonathan,

On Sun, Mar 19, 2023 at 03:54:51PM +0000, Jonathan Cameron wrote:
> On Fri, 17 Mar 2023 00:48:35 +0100
> Mehdi Djait <mehdi.djait.k@gmail.com> wrote:
> 
> > Extend the kionix,kx022a.yaml file to support the
> > kx132 device
> > 
> > Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com>
> 
> Pins and power supplies etc all look the same to me so indeed seems that
> you have covered all that is needed.  One small comment inline
> and I think Matti's point about more specific compatibles probably
> needs to be taken into account if there are known variants.
> 
> Kionix has done this for a long time. I remember that fun with the
> kxsd9 lots of years back - that had lots of subtle variants.
> 
> > ---
> >  .../bindings/iio/accel/kionix,kx022a.yaml           | 13 ++++++++-----
> >  1 file changed, 8 insertions(+), 5 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
> > index 986df1a6ff0a..ac1e27402d5e 100644
> > --- a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
> > +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
> > @@ -4,19 +4,22 @@
> >  $id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml#
> >  $schema: http://devicetree.org/meta-schemas/core.yaml#
> >  
> > -title: ROHM/Kionix KX022A Accelerometer
> > +title: ROHM/Kionix KX022A and KX132 Accelerometers
> >  
> >  maintainers:
> >    - Matti Vaittinen <mazziesaccount@gmail.com>
> >  
> >  description: |
> > -  KX022A is a 3-axis accelerometer supporting +/- 2G, 4G, 8G and 16G ranges,
> > -  output data-rates from 0.78Hz to 1600Hz and a hardware-fifo buffering.
> > -  KX022A can be accessed either via I2C or SPI.
> > +  KX022A and KX132 are 3-axis accelerometers supporting +/- 2G, 4G, 8G and
> > +  16G ranges, output data-rates from 0.78Hz to 1600Hz and a hardware-fifo
> 
> This may be one of those 'there are many versions' of the chip issues, but
> the random datasheet I got via digikey (kionix website was slow and I'm
> impatient) has max as 25600Hz for the KX132-1211.
> 
> No particular reason the sampling rates need to be in this description so
> if they are different I'd just remove the mention or just say
> "variable output data-rates"

Yes indeed, the max frequency is different and the max frequency
supported in the driver is 200Hz anyway.

Removing the values of samling rates is best here. I will change it in v2.

--
Kind Regards
Mehdi Djait
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
index 986df1a6ff0a..ac1e27402d5e 100644
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
@@ -4,19 +4,22 @@ 
 $id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROHM/Kionix KX022A Accelerometer
+title: ROHM/Kionix KX022A and KX132 Accelerometers
 
 maintainers:
   - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
-  KX022A is a 3-axis accelerometer supporting +/- 2G, 4G, 8G and 16G ranges,
-  output data-rates from 0.78Hz to 1600Hz and a hardware-fifo buffering.
-  KX022A can be accessed either via I2C or SPI.
+  KX022A and KX132 are 3-axis accelerometers supporting +/- 2G, 4G, 8G and
+  16G ranges, output data-rates from 0.78Hz to 1600Hz and a hardware-fifo
+  buffering.
+  KX022A and KX132 can be accessed either via I2C or SPI.
 
 properties:
   compatible:
-    const: kionix,kx022a
+    enum:
+      - kionix,kx022a
+      - kionix,kx132
 
   reg:
     maxItems: 1