diff mbox series

[v7,3/3] MIPS: CI20: defconfig: multiple improvements

Message ID c287fc50dbbd531bd87e629cb52ec58cba497347.1583528793.git.hns@goldelico.com
State New
Headers show
Series [v7,1/3] MIPS: DTS: CI20: add DT node for IR sensor | expand

Commit Message

H. Nikolaus Schaller March 6, 2020, 9:06 p.m. UTC 
a) configure for supporting modules

Not all drivers need to be compiled into the kernel.
Support building and loading of kernel modules.

b) compile leds-gpio driver into the kernel and configure for LED triggers

DTS has been augmented to add some gpio-leds. We need the leds-gpio driver
and enable the triggers.

c) configure CONFIG_REGULATOR_ACT8865 for PMU

The PMU on the CI20 board is an ACT8600 using the ACT8865 driver.
Since it is not compiled, the PMU and the CI20 board is running in
power-on reset state of the PMU.

d) compile gpio-ir driver

The CI20 board has a gpio based IR receiver.

e) configure for CONFIG_KEYBOARD_GPIO=m

The SW1 button is hooked up to send input events.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
---
 arch/mips/configs/ci20_defconfig | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
diff mbox series

Patch

diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index be41df2a81fb..0db0088bbc1c 100644
--- a/arch/mips/configs/ci20_defconfig
+++ b/arch/mips/configs/ci20_defconfig
@@ -1,4 +1,5 @@ 
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_MODULES=y
 CONFIG_KERNEL_XZ=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -88,12 +89,14 @@  CONFIG_I2C_JZ4780=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_KEYBOARD_GPIO=m
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_JZ4740_WDT=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_ACT8865=y
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
@@ -166,3 +169,21 @@  CONFIG_STACKTRACE=y
 # CONFIG_FTRACE is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="earlycon console=ttyS4,115200 clk_ignore_unused"
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_MTD=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_LEDS_TRIGGER_CAMERA=m
+CONFIG_LIRC=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_RC_DEVICES=y
+CONFIG_IR_GPIO_CIR=m
+CONFIG_IR_GPIO_TX=m