diff mbox series

[v2,1/5] arm64: dts: sprd: Remove PMIC INTC irq trigger type

Message ID b6a32917d1e231277d240a4084bebb6ad91247e3.1550060544.git.baolin.wang@linaro.org
State Accepted
Commit 5863dbe071caabe752ce6f9f6782fa03914527ab
Headers show
Series Add new device nodes for Spreadtrum SC9860 platform | expand

Commit Message

(Exiting) Baolin Wang Feb. 13, 2019, 12:32 p.m. UTC 
The Spreadtrum PMIC INTC controller has no registers to set trigger type,
since it is always high level trigger as default. So remove its child
devices' irq trigger type setting and change #interrupt-cells to 1.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>

---
 arch/arm64/boot/dts/sprd/sc2731.dtsi |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

-- 
1.7.9.5
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi
index 82bd642..f2f2aa5 100644
--- a/arch/arm64/boot/dts/sprd/sc2731.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi
@@ -13,7 +13,7 @@ 
 		spi-max-frequency = <26000000>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
-		#interrupt-cells = <2>;
+		#interrupt-cells = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -43,14 +43,14 @@ 
 			compatible = "sprd,sc27xx-rtc", "sprd,sc2731-rtc";
 			reg = <0x280>;
 			interrupt-parent = <&sc2731_pmic>;
-			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <2>;
 		};
 
 		pmic_eic: gpio@300 {
 			compatible = "sprd,sc27xx-eic";
 			reg = <0x300>;
 			interrupt-parent = <&sc2731_pmic>;
-			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <5>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -69,7 +69,7 @@ 
 			compatible = "sprd,sc27xx-adc", "sprd,sc2731-adc";
 			reg = <0x480>;
 			interrupt-parent = <&sc2731_pmic>;
-			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <0>;
 			#io-channel-cells = <1>;
 			hwlocks = <&hwlock 4>;
 		};