From patchwork Fri Jul 7 11:23:03 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Matti Vaittinen X-Patchwork-Id: 700414 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5377EEB64DA for ; Fri, 7 Jul 2023 11:23:18 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232366AbjGGLXR (ORCPT ); Fri, 7 Jul 2023 07:23:17 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38566 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232394AbjGGLXQ (ORCPT ); Fri, 7 Jul 2023 07:23:16 -0400 Received: from mail-lf1-x12b.google.com (mail-lf1-x12b.google.com [IPv6:2a00:1450:4864:20::12b]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id BDB03210B; Fri, 7 Jul 2023 04:23:10 -0700 (PDT) Received: by mail-lf1-x12b.google.com with SMTP id 2adb3069b0e04-4f9fdb0ef35so2837824e87.0; Fri, 07 Jul 2023 04:23:10 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20221208; t=1688728989; x=1691320989; h=in-reply-to:content-disposition:mime-version:references:message-id :subject:cc:to:from:date:from:to:cc:subject:date:message-id:reply-to; bh=bC76BhDwvxGXnn22R6GjRzYzl+h/Q/u01ff105/sBgQ=; b=OvulJ2wp7kvjJsNqUZa5a4O8MHzJHoyIKMsRNRMVaUjWy17Vlw9NraoqlHX03+bvoi 0LRIzaOURtJfjEXQA9DVQqGLz+z79SCppdgLUs73SpCN4h21QIRDdJeXK5R6V3SV8R6A LxhAm2bvZtSjN+Yrmi5Ar3hRVOXOk2EomC+94ShH8uyGA+X2NecLAQAfuOwZ+vtrL4qp DAvL7MqfVEUOWYR2i17ycfREhSTLONz9JWLyk2pl4j98PXq52YrXag8cN/eBZrW9Qy5t DQhozXF2qjX8mlprIqwF/3l5PRDRF8/9sd4S6IXZGwj8N/7jHfbC/ECERs7C0sSbVPvY pMPA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1688728989; x=1691320989; h=in-reply-to:content-disposition:mime-version:references:message-id :subject:cc:to:from:date:x-gm-message-state:from:to:cc:subject:date :message-id:reply-to; bh=bC76BhDwvxGXnn22R6GjRzYzl+h/Q/u01ff105/sBgQ=; b=Ta8S6o2oNxAn5RcU/rOnGa1GQsjzI36ku6KXTuGLmzNa4J0+SRFZ3A/pWB2QhUoLwH UPkas0VTaSC1qVX41SIAtONM+6MDo6JQ6kfk06e3vKsdUnqH6uZ1Bd9kBoWqkPAVKwDG i/VvqeM9nxLbivp3IAQeiiwDjPPDi4ZQQefuZxLcVSnaYxX/697VqB9CSqnMfRlc4mtg cTS3Ayt1q0zqFsJKH9Od79zeyHqoy3Ww0+w8Ekzfk3ad5fOCv6VeQ5s/6n0Q4ALVbuP5 WuaDPx+uS3Ch1grRlk4WUVggh0+2iHCP/NKflUcPVMVdo+sZAwAT7iF5Tb9DrxaTyUYp 0BhQ== X-Gm-Message-State: ABy/qLbh7BXWilyh8z1tYiBAo1VMkTntAltg/VfD/nl0NFKDZR4c6gnC Ph8SZfAuc8coY0nqYCOcJLc= X-Google-Smtp-Source: APBJJlEoDNEUdkTuiZsa4PG2xKEqULrUzoYCMVkzBXeymajyxcvxrgJk5wfVOPDKQ09Hzx29BGap1w== X-Received: by 2002:a05:6512:36cb:b0:4f8:6560:6436 with SMTP id e11-20020a05651236cb00b004f865606436mr3369596lfs.9.1688728988606; Fri, 07 Jul 2023 04:23:08 -0700 (PDT) Received: from dc78bmyyyyyyyyyyyyyyt-3.rev.dnainternet.fi (dc78bmyyyyyyyyyyyyyyt-3.rev.dnainternet.fi. [2001:14ba:16f8:1500::1]) by smtp.gmail.com with ESMTPSA id t21-20020ac24c15000000b004f858249931sm646040lfq.93.2023.07.07.04.23.07 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 07 Jul 2023 04:23:07 -0700 (PDT) Date: Fri, 7 Jul 2023 14:23:03 +0300 From: Matti Vaittinen To: Matti Vaittinen , Matti Vaittinen Cc: Jonathan Cameron , Lars-Peter Clausen , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Matti Vaittinen , linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 2/3] iio: light: bu27008: add chip info Message-ID: References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org The ROHM BU27010 RGB + flickering sensor is in many regards similar to the BU27008. Prepare for adding support for BU27010 by allowing chip-specific properties to be brought from the of_device_id data. Signed-off-by: Matti Vaittinen --- Revision history: v1 => v2: - Move all generic refactoring from next patch to this one so that the next one will only contain the BU27010 specific additions. - reorder bu27008 chip-data assignments to match the struct member placement - Cleanup --- drivers/iio/light/rohm-bu27008.c | 323 ++++++++++++++++++++----------- 1 file changed, 208 insertions(+), 115 deletions(-) diff --git a/drivers/iio/light/rohm-bu27008.c b/drivers/iio/light/rohm-bu27008.c index b50bf8973d9a..08e2b1194bf4 100644 --- a/drivers/iio/light/rohm-bu27008.c +++ b/drivers/iio/light/rohm-bu27008.c @@ -211,7 +211,35 @@ static const struct iio_chan_spec bu27008_channels[] = { IIO_CHAN_SOFT_TIMESTAMP(BU27008_NUM_CHANS), }; +struct bu27008_data; + +struct bu27_chip_data { + const char *name; + int (*chip_init)(struct bu27008_data *data); + int (*get_gain_sel)(struct bu27008_data *data, int *sel); + int (*write_gain_sel)(struct bu27008_data *data, int sel); + const struct regmap_config *regmap_cfg; + const struct iio_gain_sel_pair *gains; + const struct iio_gain_sel_pair *gains_ir; + const struct iio_itime_sel_mul *itimes; + int num_gains; + int num_gains_ir; + int num_itimes; + int scale1x; + + int drdy_en_reg; + int drdy_en_mask; + int meas_en_reg; + int meas_en_mask; + int valid_reg; + int chan_sel_reg; + int chan_sel_mask; + int int_time_mask; + u8 part_id; +}; + struct bu27008_data { + const struct bu27_chip_data *cd; struct regmap *regmap; struct iio_trigger *trig; struct device *dev; @@ -282,51 +310,6 @@ static const struct regmap_config bu27008_regmap = { .disable_locking = true, }; -#define BU27008_MAX_VALID_RESULT_WAIT_US 50000 -#define BU27008_VALID_RESULT_WAIT_QUANTA_US 1000 - -static int bu27008_chan_read_data(struct bu27008_data *data, int reg, int *val) -{ - int ret, valid; - __le16 tmp; - - ret = regmap_read_poll_timeout(data->regmap, BU27008_REG_MODE_CONTROL3, - valid, (valid & BU27008_MASK_VALID), - BU27008_VALID_RESULT_WAIT_QUANTA_US, - BU27008_MAX_VALID_RESULT_WAIT_US); - if (ret) - return ret; - - ret = regmap_bulk_read(data->regmap, reg, &tmp, sizeof(tmp)); - if (ret) - dev_err(data->dev, "Reading channel data failed\n"); - - *val = le16_to_cpu(tmp); - - return ret; -} - -static int bu27008_get_gain(struct bu27008_data *data, struct iio_gts *gts, int *gain) -{ - int ret, sel; - - ret = regmap_read(data->regmap, BU27008_REG_MODE_CONTROL2, &sel); - if (ret) - return ret; - - sel = FIELD_GET(BU27008_MASK_RGBC_GAIN, sel); - - ret = iio_gts_find_gain_by_sel(gts, sel); - if (ret < 0) { - dev_err(data->dev, "unknown gain value 0x%x\n", sel); - return ret; - } - - *gain = ret; - - return 0; -} - static int bu27008_write_gain_sel(struct bu27008_data *data, int sel) { int regval; @@ -368,6 +351,123 @@ static int bu27008_write_gain_sel(struct bu27008_data *data, int sel) BU27008_MASK_RGBC_GAIN, regval); } +static int bu27008_get_gain_sel(struct bu27008_data *data, int *sel) +{ + int ret; + + /* + * If we always "lock" the gain selectors for all channels to prevent + * unsupported configs, then it does not matter which channel is used + * we can just return selector from any of them. + * + * This, however is not true if we decide to support only 4X and 16X + * and then individual gains for channels. Currently this is not the + * case. + * + * If we some day decide to support individual gains, then we need to + * have channel information here. + */ + + ret = regmap_read(data->regmap, BU27008_REG_MODE_CONTROL2, sel); + if (ret) + return ret; + + *sel = FIELD_GET(BU27008_MASK_RGBC_GAIN, *sel); + + return 0; +} + +static int bu27008_chip_init(struct bu27008_data *data) +{ + int ret; + + ret = regmap_write_bits(data->regmap, BU27008_REG_SYSTEM_CONTROL, + BU27008_MASK_SW_RESET, BU27008_MASK_SW_RESET); + if (ret) + return dev_err_probe(data->dev, ret, "Sensor reset failed\n"); + + /* + * The data-sheet does not tell how long performing the IC reset takes. + * However, the data-sheet says the minimum time it takes the IC to be + * able to take inputs after power is applied, is 100 uS. I'd assume + * > 1 mS is enough. + */ + msleep(1); + + ret = regmap_reinit_cache(data->regmap, data->cd->regmap_cfg); + if (ret) + dev_err(data->dev, "Failed to reinit reg cache\n"); + + return ret; +} + +static const struct bu27_chip_data bu27008_chip = { + .name = "bu27008", + .chip_init = bu27008_chip_init, + .get_gain_sel = bu27008_get_gain_sel, + .write_gain_sel = bu27008_write_gain_sel, + .regmap_cfg = &bu27008_regmap, + .gains = &bu27008_gains[0], + .gains_ir = &bu27008_gains_ir[0], + .itimes = &bu27008_itimes[0], + .num_gains = ARRAY_SIZE(bu27008_gains), + .num_gains_ir = ARRAY_SIZE(bu27008_gains_ir), + .num_itimes = ARRAY_SIZE(bu27008_itimes), + .scale1x = BU27008_SCALE_1X, + .drdy_en_reg = BU27008_REG_MODE_CONTROL3, + .drdy_en_mask = BU27008_MASK_INT_EN, + .valid_reg = BU27008_REG_MODE_CONTROL3, + .meas_en_reg = BU27008_REG_MODE_CONTROL3, + .meas_en_mask = BU27008_MASK_MEAS_EN, + .chan_sel_reg = BU27008_REG_MODE_CONTROL3, + .chan_sel_mask = BU27008_MASK_CHAN_SEL, + .int_time_mask = BU27008_MASK_MEAS_MODE, + .part_id = BU27008_ID, +}; + +#define BU27008_MAX_VALID_RESULT_WAIT_US 50000 +#define BU27008_VALID_RESULT_WAIT_QUANTA_US 1000 + +static int bu27008_chan_read_data(struct bu27008_data *data, int reg, int *val) +{ + int ret, valid; + __le16 tmp; + + ret = regmap_read_poll_timeout(data->regmap, data->cd->valid_reg, + valid, (valid & BU27008_MASK_VALID), + BU27008_VALID_RESULT_WAIT_QUANTA_US, + BU27008_MAX_VALID_RESULT_WAIT_US); + if (ret) + return ret; + + ret = regmap_bulk_read(data->regmap, reg, &tmp, sizeof(tmp)); + if (ret) + dev_err(data->dev, "Reading channel data failed\n"); + + *val = le16_to_cpu(tmp); + + return ret; +} + +static int bu27008_get_gain(struct bu27008_data *data, struct iio_gts *gts, int *gain) +{ + int ret, sel; + + ret = data->cd->get_gain_sel(data, &sel); + if (ret) + return ret; + + ret = iio_gts_find_gain_by_sel(gts, sel); + if (ret < 0) { + dev_err(data->dev, "unknown gain value 0x%x\n", sel); + return ret; + } + + *gain = ret; + + return 0; +} + static int bu27008_set_gain(struct bu27008_data *data, int gain) { int ret; @@ -376,7 +476,7 @@ static int bu27008_set_gain(struct bu27008_data *data, int gain) if (ret < 0) return ret; - return bu27008_write_gain_sel(data, ret); + return data->cd->write_gain_sel(data, ret); } static int bu27008_get_int_time_sel(struct bu27008_data *data, int *sel) @@ -384,15 +484,23 @@ static int bu27008_get_int_time_sel(struct bu27008_data *data, int *sel) int ret, val; ret = regmap_read(data->regmap, BU27008_REG_MODE_CONTROL1, &val); - *sel = FIELD_GET(BU27008_MASK_MEAS_MODE, val); + if (ret) + return ret; - return ret; + val &= data->cd->int_time_mask; + val >>= ffs(data->cd->int_time_mask) - 1; + + *sel = val; + + return 0; } static int bu27008_set_int_time_sel(struct bu27008_data *data, int sel) { + sel <<= ffs(data->cd->int_time_mask) - 1; + return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL1, - BU27008_MASK_MEAS_MODE, sel); + data->cd->int_time_mask, sel); } static int bu27008_get_int_time_us(struct bu27008_data *data) @@ -448,8 +556,7 @@ static int bu27008_set_int_time(struct bu27008_data *data, int time) if (ret < 0) return ret; - return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL1, - BU27008_MASK_MEAS_MODE, ret); + return bu27008_set_int_time_sel(data, ret); } /* Try to change the time so that the scale is maintained */ @@ -527,10 +634,13 @@ static int bu27008_try_set_int_time(struct bu27008_data *data, int int_time_new) return ret; } -static int bu27008_meas_set(struct bu27008_data *data, int state) +static int bu27008_meas_set(struct bu27008_data *data, bool enable) { - return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL3, - BU27008_MASK_MEAS_EN, state); + if (enable) + return regmap_set_bits(data->regmap, data->cd->meas_en_reg, + data->cd->meas_en_mask); + return regmap_clear_bits(data->regmap, data->cd->meas_en_reg, + data->cd->meas_en_mask); } static int bu27008_chan_cfg(struct bu27008_data *data, @@ -543,9 +653,15 @@ static int bu27008_chan_cfg(struct bu27008_data *data, else chan_sel = BU27008_CLEAR2_IR3; - chan_sel = FIELD_PREP(BU27008_MASK_CHAN_SEL, chan_sel); + /* + * prepare bitfield for channel sel. The FIELD_PREP works only when + * mask is constant. In our case the mask is assigned based on the + * chip type. Hence the open-coded FIELD_PREP here. We don't bother + * zeroing the irrelevant bits though - update_bits takes care of that. + */ + chan_sel <<= ffs(data->cd->chan_sel_mask) - 1; - return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL3, + return regmap_update_bits(data->regmap, data->cd->chan_sel_reg, BU27008_MASK_CHAN_SEL, chan_sel); } @@ -558,7 +674,7 @@ static int bu27008_read_one(struct bu27008_data *data, struct iio_dev *idev, if (ret) return ret; - ret = bu27008_meas_set(data, BU27008_MEAS_EN); + ret = bu27008_meas_set(data, true); if (ret) return ret; @@ -574,7 +690,7 @@ static int bu27008_read_one(struct bu27008_data *data, struct iio_dev *idev, if (!ret) ret = IIO_VAL_INT; - if (bu27008_meas_set(data, BU27008_MEAS_DIS)) + if (bu27008_meas_set(data, false)) dev_warn(data->dev, "measurement disabling failed\n"); return ret; @@ -669,7 +785,7 @@ static int bu27008_set_scale(struct bu27008_data *data, goto unlock_out; } - ret = bu27008_write_gain_sel(data, gain_sel); + ret = data->cd->write_gain_sel(data, gain_sel); unlock_out: mutex_unlock(&data->mutex); @@ -762,10 +878,10 @@ static int bu27008_update_scan_mode(struct iio_dev *idev, chan_sel = BU27008_CLEAR2_IR3; } - chan_sel = FIELD_PREP(BU27008_MASK_CHAN_SEL, chan_sel); + chan_sel <<= ffs(data->cd->chan_sel_mask) - 1; - return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL3, - BU27008_MASK_CHAN_SEL, chan_sel); + return regmap_update_bits(data->regmap, data->cd->chan_sel_reg, + data->cd->chan_sel_mask, chan_sel); } static const struct iio_info bu27008_info = { @@ -777,46 +893,18 @@ static const struct iio_info bu27008_info = { .validate_trigger = iio_validate_own_trigger, }; -static int bu27008_chip_init(struct bu27008_data *data) -{ - int ret; - - ret = regmap_write_bits(data->regmap, BU27008_REG_SYSTEM_CONTROL, - BU27008_MASK_SW_RESET, BU27008_MASK_SW_RESET); - if (ret) - return dev_err_probe(data->dev, ret, "Sensor reset failed\n"); - - /* - * The data-sheet does not tell how long performing the IC reset takes. - * However, the data-sheet says the minimum time it takes the IC to be - * able to take inputs after power is applied, is 100 uS. I'd assume - * > 1 mS is enough. - */ - msleep(1); - - ret = regmap_reinit_cache(data->regmap, &bu27008_regmap); - if (ret) - dev_err(data->dev, "Failed to reinit reg cache\n"); - - return ret; -} - -static int bu27008_set_drdy_irq(struct bu27008_data *data, int state) -{ - return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL3, - BU27008_MASK_INT_EN, state); -} - -static int bu27008_trigger_set_state(struct iio_trigger *trig, - bool state) +static int bu27008_trigger_set_state(struct iio_trigger *trig, bool state) { struct bu27008_data *data = iio_trigger_get_drvdata(trig); int ret; + if (state) - ret = bu27008_set_drdy_irq(data, BU27008_INT_EN); + ret = regmap_set_bits(data->regmap, data->cd->drdy_en_reg, + data->cd->drdy_en_mask); else - ret = bu27008_set_drdy_irq(data, BU27008_INT_DIS); + ret = regmap_clear_bits(data->regmap, data->cd->drdy_en_reg, + data->cd->drdy_en_mask); if (ret) dev_err(data->dev, "Failed to set trigger state\n"); @@ -852,7 +940,7 @@ static irqreturn_t bu27008_trigger_handler(int irq, void *p) * After some measurements, it seems reading the * BU27008_REG_MODE_CONTROL3 debounces the IRQ line */ - ret = regmap_read(data->regmap, BU27008_REG_MODE_CONTROL3, &dummy); + ret = regmap_read(data->regmap, data->cd->valid_reg, &dummy); if (ret < 0) goto err_read; @@ -872,14 +960,14 @@ static int bu27008_buffer_preenable(struct iio_dev *idev) { struct bu27008_data *data = iio_priv(idev); - return bu27008_meas_set(data, BU27008_MEAS_EN); + return bu27008_meas_set(data, true); } static int bu27008_buffer_postdisable(struct iio_dev *idev) { struct bu27008_data *data = iio_priv(idev); - return bu27008_meas_set(data, BU27008_MEAS_DIS); + return bu27008_meas_set(data, false); } static const struct iio_buffer_setup_ops bu27008_buffer_ops = { @@ -952,11 +1040,6 @@ static int bu27008_probe(struct i2c_client *i2c) struct iio_dev *idev; int ret; - regmap = devm_regmap_init_i2c(i2c, &bu27008_regmap); - if (IS_ERR(regmap)) - return dev_err_probe(dev, PTR_ERR(regmap), - "Failed to initialize Regmap\n"); - idev = devm_iio_device_alloc(dev, sizeof(*data)); if (!idev) return -ENOMEM; @@ -967,24 +1050,34 @@ static int bu27008_probe(struct i2c_client *i2c) data = iio_priv(idev); + data->cd = device_get_match_data(&i2c->dev); + if (!data->cd) + return -ENODEV; + + regmap = devm_regmap_init_i2c(i2c, data->cd->regmap_cfg); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "Failed to initialize Regmap\n"); + + ret = regmap_read(regmap, BU27008_REG_SYSTEM_CONTROL, ®); if (ret) return dev_err_probe(dev, ret, "Failed to access sensor\n"); part_id = FIELD_GET(BU27008_MASK_PART_ID, reg); - if (part_id != BU27008_ID) + if (part_id != data->cd->part_id) dev_warn(dev, "unknown device 0x%x\n", part_id); - ret = devm_iio_init_iio_gts(dev, BU27008_SCALE_1X, 0, bu27008_gains, - ARRAY_SIZE(bu27008_gains), bu27008_itimes, - ARRAY_SIZE(bu27008_itimes), &data->gts); + ret = devm_iio_init_iio_gts(dev, data->cd->scale1x, 0, data->cd->gains, + data->cd->num_gains, data->cd->itimes, + data->cd->num_itimes, &data->gts); if (ret) return ret; - ret = devm_iio_init_iio_gts(dev, BU27008_SCALE_1X, 0, bu27008_gains_ir, - ARRAY_SIZE(bu27008_gains_ir), bu27008_itimes, - ARRAY_SIZE(bu27008_itimes), &data->gts_ir); + ret = devm_iio_init_iio_gts(dev, data->cd->scale1x, 0, data->cd->gains_ir, + data->cd->num_gains_ir, data->cd->itimes, + data->cd->num_itimes, &data->gts_ir); if (ret) return ret; @@ -993,14 +1086,14 @@ static int bu27008_probe(struct i2c_client *i2c) data->dev = dev; data->irq = i2c->irq; - idev->channels = bu27008_channels; + idev->channels = &bu27008_channels[0]; idev->num_channels = ARRAY_SIZE(bu27008_channels); - idev->name = "bu27008"; + idev->name = data->cd->name; idev->info = &bu27008_info; idev->modes = INDIO_DIRECT_MODE; idev->available_scan_masks = bu27008_scan_masks; - ret = bu27008_chip_init(data); + ret = data->cd->chip_init(data); if (ret) return ret; @@ -1021,7 +1114,7 @@ static int bu27008_probe(struct i2c_client *i2c) } static const struct of_device_id bu27008_of_match[] = { - { .compatible = "rohm,bu27008" }, + { .compatible = "rohm,bu27008", .data = &bu27008_chip }, { } }; MODULE_DEVICE_TABLE(of, bu27008_of_match);