| Message ID | a0427a66360bdec73c3b1fb536a46240f96b2ae7.1605631305.git.lorenzo@kernel.org |
|---|---|
| State | Accepted |
| Commit | f346b16f94af2ac9e6815e883170b78582f56367 |
| Headers | show |
| Series | st_lsm6dsx: add vdd-vddio power regulator | expand |
On Tue, 17 Nov 2020 17:47:25 +0100 Lorenzo Bianconi <lorenzo@kernel.org> wrote: > Like all other ST sensors, st_lsm6dsx devices have VDD and VDDIO power > lines. Introduce voltage regulators to control them. > > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Oops. I should have pointed out the dev_err_probe more appropriate to avoid complaining when we just tried to probe to early in the sequence and will try again later. I'll hopefully fix this up an apply once I've picked up my own patch to do the yaml conversion. Jonathan > --- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 3 ++ > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 42 ++++++++++++++++++++ > 2 files changed, 45 insertions(+) > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > index 1f31657a7a0e..4b4ec39d4400 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > @@ -13,6 +13,7 @@ > > #include <linux/device.h> > #include <linux/iio/iio.h> > +#include <linux/regulator/consumer.h> > > #define ST_LSM6DS3_DEV_NAME "lsm6ds3" > #define ST_LSM6DS3H_DEV_NAME "lsm6ds3h" > @@ -368,6 +369,7 @@ struct st_lsm6dsx_sensor { > * struct st_lsm6dsx_hw - ST IMU MEMS hw instance > * @dev: Pointer to instance of struct device (I2C or SPI). > * @regmap: Register map of the device. > + * @regulators: VDD/VDDIO voltage regulators. > * @irq: Device interrupt line (I2C or SPI). > * @fifo_lock: Mutex to prevent concurrent access to the hw FIFO. > * @conf_lock: Mutex to prevent concurrent FIFO configuration update. > @@ -390,6 +392,7 @@ struct st_lsm6dsx_sensor { > struct st_lsm6dsx_hw { > struct device *dev; > struct regmap *regmap; > + struct regulator_bulk_data regulators[2]; > int irq; > > struct mutex fifo_lock; > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > index 5e584c6026f1..fde46377826c 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > @@ -2533,6 +2533,40 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw) > return 0; > } > > +static int st_lsm6dsx_init_regulators(struct device *dev) > +{ > + struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev); > + int err; > + > + /* vdd-vddio power regulators */ > + hw->regulators[0].supply = "vdd"; > + hw->regulators[1].supply = "vddio"; > + err = devm_regulator_bulk_get(dev, ARRAY_SIZE(hw->regulators), > + hw->regulators); > + if (err) { > + dev_err(dev, "failed to get regulators: %d\n", err); > + return err; > + } > + > + err = regulator_bulk_enable(ARRAY_SIZE(hw->regulators), > + hw->regulators); > + if (err) { > + dev_err(dev, "failed to enable regulators: %d\n", err); > + return err; > + } > + > + msleep(50); > + > + return 0; > +} > + > +static void st_lsm6dsx_chip_uninit(void *data) > +{ > + struct st_lsm6dsx_hw *hw = data; > + > + regulator_bulk_disable(ARRAY_SIZE(hw->regulators), hw->regulators); > +} > + > int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, > struct regmap *regmap) > { > @@ -2552,6 +2586,14 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, > mutex_init(&hw->conf_lock); > mutex_init(&hw->page_lock); > > + err = st_lsm6dsx_init_regulators(dev); > + if (err) > + return err; > + > + err = devm_add_action_or_reset(dev, st_lsm6dsx_chip_uninit, hw); > + if (err) > + return err; > + > hw->buff = devm_kzalloc(dev, ST_LSM6DSX_BUFF_SIZE, GFP_KERNEL); > if (!hw->buff) > return -ENOMEM;
> On Tue, 17 Nov 2020 17:47:25 +0100 > Lorenzo Bianconi <lorenzo@kernel.org> wrote: > > > Like all other ST sensors, st_lsm6dsx devices have VDD and VDDIO power > > lines. Introduce voltage regulators to control them. > > > > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> > Oops. I should have pointed out the dev_err_probe more appropriate > to avoid complaining when we just tried to probe to early in the > sequence and will try again later. I'll hopefully fix this > up an apply once I've picked up my own patch to do the yaml conversion. > ack, fine for me otherwise I can just send v3. Up to you. Regards, Lorenzo > Jonathan > > > --- > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 3 ++ > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 42 ++++++++++++++++++++ > > 2 files changed, 45 insertions(+) > > > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > > index 1f31657a7a0e..4b4ec39d4400 100644 > > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > > @@ -13,6 +13,7 @@ > > > > #include <linux/device.h> > > #include <linux/iio/iio.h> > > +#include <linux/regulator/consumer.h> > > > > #define ST_LSM6DS3_DEV_NAME "lsm6ds3" > > #define ST_LSM6DS3H_DEV_NAME "lsm6ds3h" > > @@ -368,6 +369,7 @@ struct st_lsm6dsx_sensor { > > * struct st_lsm6dsx_hw - ST IMU MEMS hw instance > > * @dev: Pointer to instance of struct device (I2C or SPI). > > * @regmap: Register map of the device. > > + * @regulators: VDD/VDDIO voltage regulators. > > * @irq: Device interrupt line (I2C or SPI). > > * @fifo_lock: Mutex to prevent concurrent access to the hw FIFO. > > * @conf_lock: Mutex to prevent concurrent FIFO configuration update. > > @@ -390,6 +392,7 @@ struct st_lsm6dsx_sensor { > > struct st_lsm6dsx_hw { > > struct device *dev; > > struct regmap *regmap; > > + struct regulator_bulk_data regulators[2]; > > int irq; > > > > struct mutex fifo_lock; > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > > index 5e584c6026f1..fde46377826c 100644 > > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > > @@ -2533,6 +2533,40 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw) > > return 0; > > } > > > > +static int st_lsm6dsx_init_regulators(struct device *dev) > > +{ > > + struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev); > > + int err; > > + > > + /* vdd-vddio power regulators */ > > + hw->regulators[0].supply = "vdd"; > > + hw->regulators[1].supply = "vddio"; > > + err = devm_regulator_bulk_get(dev, ARRAY_SIZE(hw->regulators), > > + hw->regulators); > > + if (err) { > > + dev_err(dev, "failed to get regulators: %d\n", err); > > + return err; > > + } > > + > > + err = regulator_bulk_enable(ARRAY_SIZE(hw->regulators), > > + hw->regulators); > > + if (err) { > > + dev_err(dev, "failed to enable regulators: %d\n", err); > > + return err; > > + } > > + > > + msleep(50); > > + > > + return 0; > > +} > > + > > +static void st_lsm6dsx_chip_uninit(void *data) > > +{ > > + struct st_lsm6dsx_hw *hw = data; > > + > > + regulator_bulk_disable(ARRAY_SIZE(hw->regulators), hw->regulators); > > +} > > + > > int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, > > struct regmap *regmap) > > { > > @@ -2552,6 +2586,14 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, > > mutex_init(&hw->conf_lock); > > mutex_init(&hw->page_lock); > > > > + err = st_lsm6dsx_init_regulators(dev); > > + if (err) > > + return err; > > + > > + err = devm_add_action_or_reset(dev, st_lsm6dsx_chip_uninit, hw); > > + if (err) > > + return err; > > + > > hw->buff = devm_kzalloc(dev, ST_LSM6DSX_BUFF_SIZE, GFP_KERNEL); > > if (!hw->buff) > > return -ENOMEM; >
On Sun, 22 Nov 2020 11:36:44 +0100 Lorenzo Bianconi <lorenzo@kernel.org> wrote: > > On Tue, 17 Nov 2020 17:47:25 +0100 > > Lorenzo Bianconi <lorenzo@kernel.org> wrote: > > > > > Like all other ST sensors, st_lsm6dsx devices have VDD and VDDIO power > > > lines. Introduce voltage regulators to control them. > > > > > > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> > > Oops. I should have pointed out the dev_err_probe more appropriate > > to avoid complaining when we just tried to probe to early in the > > sequence and will try again later. I'll hopefully fix this > > up an apply once I've picked up my own patch to do the yaml conversion. > > > > ack, fine for me otherwise I can just send v3. Up to you. I've done it and applied both this and patch 2 to the togreg branch of iio.git (having earlier applied the binding conversion patch). Please take a quick look and make sure it all looks right to you. Thanks, Jonathan > > Regards, > Lorenzo > > > Jonathan > > > > > --- > > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 3 ++ > > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 42 ++++++++++++++++++++ > > > 2 files changed, 45 insertions(+) > > > > > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > > > index 1f31657a7a0e..4b4ec39d4400 100644 > > > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > > > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > > > @@ -13,6 +13,7 @@ > > > > > > #include <linux/device.h> > > > #include <linux/iio/iio.h> > > > +#include <linux/regulator/consumer.h> > > > > > > #define ST_LSM6DS3_DEV_NAME "lsm6ds3" > > > #define ST_LSM6DS3H_DEV_NAME "lsm6ds3h" > > > @@ -368,6 +369,7 @@ struct st_lsm6dsx_sensor { > > > * struct st_lsm6dsx_hw - ST IMU MEMS hw instance > > > * @dev: Pointer to instance of struct device (I2C or SPI). > > > * @regmap: Register map of the device. > > > + * @regulators: VDD/VDDIO voltage regulators. > > > * @irq: Device interrupt line (I2C or SPI). > > > * @fifo_lock: Mutex to prevent concurrent access to the hw FIFO. > > > * @conf_lock: Mutex to prevent concurrent FIFO configuration update. > > > @@ -390,6 +392,7 @@ struct st_lsm6dsx_sensor { > > > struct st_lsm6dsx_hw { > > > struct device *dev; > > > struct regmap *regmap; > > > + struct regulator_bulk_data regulators[2]; > > > int irq; > > > > > > struct mutex fifo_lock; > > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > > > index 5e584c6026f1..fde46377826c 100644 > > > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > > > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > > > @@ -2533,6 +2533,40 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw) > > > return 0; > > > } > > > > > > +static int st_lsm6dsx_init_regulators(struct device *dev) > > > +{ > > > + struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev); > > > + int err; > > > + > > > + /* vdd-vddio power regulators */ > > > + hw->regulators[0].supply = "vdd"; > > > + hw->regulators[1].supply = "vddio"; > > > + err = devm_regulator_bulk_get(dev, ARRAY_SIZE(hw->regulators), > > > + hw->regulators); > > > + if (err) { > > > + dev_err(dev, "failed to get regulators: %d\n", err); > > > + return err; > > > + } > > > + > > > + err = regulator_bulk_enable(ARRAY_SIZE(hw->regulators), > > > + hw->regulators); > > > + if (err) { > > > + dev_err(dev, "failed to enable regulators: %d\n", err); > > > + return err; > > > + } > > > + > > > + msleep(50); > > > + > > > + return 0; > > > +} > > > + > > > +static void st_lsm6dsx_chip_uninit(void *data) > > > +{ > > > + struct st_lsm6dsx_hw *hw = data; > > > + > > > + regulator_bulk_disable(ARRAY_SIZE(hw->regulators), hw->regulators); > > > +} > > > + > > > int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, > > > struct regmap *regmap) > > > { > > > @@ -2552,6 +2586,14 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, > > > mutex_init(&hw->conf_lock); > > > mutex_init(&hw->page_lock); > > > > > > + err = st_lsm6dsx_init_regulators(dev); > > > + if (err) > > > + return err; > > > + > > > + err = devm_add_action_or_reset(dev, st_lsm6dsx_chip_uninit, hw); > > > + if (err) > > > + return err; > > > + > > > hw->buff = devm_kzalloc(dev, ST_LSM6DSX_BUFF_SIZE, GFP_KERNEL); > > > if (!hw->buff) > > > return -ENOMEM; > >
> On Sun, 22 Nov 2020 11:36:44 +0100 > Lorenzo Bianconi <lorenzo@kernel.org> wrote: > > > > On Tue, 17 Nov 2020 17:47:25 +0100 > > > Lorenzo Bianconi <lorenzo@kernel.org> wrote: > > > > > > > Like all other ST sensors, st_lsm6dsx devices have VDD and VDDIO power > > > > lines. Introduce voltage regulators to control them. > > > > > > > > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> > > > Oops. I should have pointed out the dev_err_probe more appropriate > > > to avoid complaining when we just tried to probe to early in the > > > sequence and will try again later. I'll hopefully fix this > > > up an apply once I've picked up my own patch to do the yaml conversion. > > > > > > > ack, fine for me otherwise I can just send v3. Up to you. > I've done it and applied both this and patch 2 to the togreg branch of > iio.git (having earlier applied the binding conversion patch). > > Please take a quick look and make sure it all looks right to you. ack, it is fine, thanks Jonathan. Regards, Lorenzo > > Thanks, > > Jonathan > > > > > Regards, > > Lorenzo > > > > > Jonathan > > > > > > > --- > > > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 3 ++ > > > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 42 ++++++++++++++++++++ > > > > 2 files changed, 45 insertions(+) > > > > > > > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > > > > index 1f31657a7a0e..4b4ec39d4400 100644 > > > > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > > > > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > > > > @@ -13,6 +13,7 @@ > > > > > > > > #include <linux/device.h> > > > > #include <linux/iio/iio.h> > > > > +#include <linux/regulator/consumer.h> > > > > > > > > #define ST_LSM6DS3_DEV_NAME "lsm6ds3" > > > > #define ST_LSM6DS3H_DEV_NAME "lsm6ds3h" > > > > @@ -368,6 +369,7 @@ struct st_lsm6dsx_sensor { > > > > * struct st_lsm6dsx_hw - ST IMU MEMS hw instance > > > > * @dev: Pointer to instance of struct device (I2C or SPI). > > > > * @regmap: Register map of the device. > > > > + * @regulators: VDD/VDDIO voltage regulators. > > > > * @irq: Device interrupt line (I2C or SPI). > > > > * @fifo_lock: Mutex to prevent concurrent access to the hw FIFO. > > > > * @conf_lock: Mutex to prevent concurrent FIFO configuration update. > > > > @@ -390,6 +392,7 @@ struct st_lsm6dsx_sensor { > > > > struct st_lsm6dsx_hw { > > > > struct device *dev; > > > > struct regmap *regmap; > > > > + struct regulator_bulk_data regulators[2]; > > > > int irq; > > > > > > > > struct mutex fifo_lock; > > > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > > > > index 5e584c6026f1..fde46377826c 100644 > > > > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > > > > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > > > > @@ -2533,6 +2533,40 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw) > > > > return 0; > > > > } > > > > > > > > +static int st_lsm6dsx_init_regulators(struct device *dev) > > > > +{ > > > > + struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev); > > > > + int err; > > > > + > > > > + /* vdd-vddio power regulators */ > > > > + hw->regulators[0].supply = "vdd"; > > > > + hw->regulators[1].supply = "vddio"; > > > > + err = devm_regulator_bulk_get(dev, ARRAY_SIZE(hw->regulators), > > > > + hw->regulators); > > > > + if (err) { > > > > + dev_err(dev, "failed to get regulators: %d\n", err); > > > > + return err; > > > > + } > > > > + > > > > + err = regulator_bulk_enable(ARRAY_SIZE(hw->regulators), > > > > + hw->regulators); > > > > + if (err) { > > > > + dev_err(dev, "failed to enable regulators: %d\n", err); > > > > + return err; > > > > + } > > > > + > > > > + msleep(50); > > > > + > > > > + return 0; > > > > +} > > > > + > > > > +static void st_lsm6dsx_chip_uninit(void *data) > > > > +{ > > > > + struct st_lsm6dsx_hw *hw = data; > > > > + > > > > + regulator_bulk_disable(ARRAY_SIZE(hw->regulators), hw->regulators); > > > > +} > > > > + > > > > int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, > > > > struct regmap *regmap) > > > > { > > > > @@ -2552,6 +2586,14 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, > > > > mutex_init(&hw->conf_lock); > > > > mutex_init(&hw->page_lock); > > > > > > > > + err = st_lsm6dsx_init_regulators(dev); > > > > + if (err) > > > > + return err; > > > > + > > > > + err = devm_add_action_or_reset(dev, st_lsm6dsx_chip_uninit, hw); > > > > + if (err) > > > > + return err; > > > > + > > > > hw->buff = devm_kzalloc(dev, ST_LSM6DSX_BUFF_SIZE, GFP_KERNEL); > > > > if (!hw->buff) > > > > return -ENOMEM; > > > >
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index 1f31657a7a0e..4b4ec39d4400 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -13,6 +13,7 @@ #include <linux/device.h> #include <linux/iio/iio.h> +#include <linux/regulator/consumer.h> #define ST_LSM6DS3_DEV_NAME "lsm6ds3" #define ST_LSM6DS3H_DEV_NAME "lsm6ds3h" @@ -368,6 +369,7 @@ struct st_lsm6dsx_sensor { * struct st_lsm6dsx_hw - ST IMU MEMS hw instance * @dev: Pointer to instance of struct device (I2C or SPI). * @regmap: Register map of the device. + * @regulators: VDD/VDDIO voltage regulators. * @irq: Device interrupt line (I2C or SPI). * @fifo_lock: Mutex to prevent concurrent access to the hw FIFO. * @conf_lock: Mutex to prevent concurrent FIFO configuration update. @@ -390,6 +392,7 @@ struct st_lsm6dsx_sensor { struct st_lsm6dsx_hw { struct device *dev; struct regmap *regmap; + struct regulator_bulk_data regulators[2]; int irq; struct mutex fifo_lock; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index 5e584c6026f1..fde46377826c 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -2533,6 +2533,40 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw) return 0; } +static int st_lsm6dsx_init_regulators(struct device *dev) +{ + struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev); + int err; + + /* vdd-vddio power regulators */ + hw->regulators[0].supply = "vdd"; + hw->regulators[1].supply = "vddio"; + err = devm_regulator_bulk_get(dev, ARRAY_SIZE(hw->regulators), + hw->regulators); + if (err) { + dev_err(dev, "failed to get regulators: %d\n", err); + return err; + } + + err = regulator_bulk_enable(ARRAY_SIZE(hw->regulators), + hw->regulators); + if (err) { + dev_err(dev, "failed to enable regulators: %d\n", err); + return err; + } + + msleep(50); + + return 0; +} + +static void st_lsm6dsx_chip_uninit(void *data) +{ + struct st_lsm6dsx_hw *hw = data; + + regulator_bulk_disable(ARRAY_SIZE(hw->regulators), hw->regulators); +} + int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, struct regmap *regmap) { @@ -2552,6 +2586,14 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, mutex_init(&hw->conf_lock); mutex_init(&hw->page_lock); + err = st_lsm6dsx_init_regulators(dev); + if (err) + return err; + + err = devm_add_action_or_reset(dev, st_lsm6dsx_chip_uninit, hw); + if (err) + return err; + hw->buff = devm_kzalloc(dev, ST_LSM6DSX_BUFF_SIZE, GFP_KERNEL); if (!hw->buff) return -ENOMEM;
Like all other ST sensors, st_lsm6dsx devices have VDD and VDDIO power lines. Introduce voltage regulators to control them. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 3 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 42 ++++++++++++++++++++ 2 files changed, 45 insertions(+)