From patchwork Wed Jan 3 18:12:24 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jan Kiszka X-Patchwork-Id: 759998 Received: from mta-64-228.siemens.flowmailer.net (mta-64-228.siemens.flowmailer.net [185.136.64.228]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 1D4C91C6B5 for ; Wed, 3 Jan 2024 18:22:39 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=siemens.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=rts-flowmailer.siemens.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=siemens.com header.i=jan.kiszka@siemens.com header.b="RUcpp1MC" Received: by mta-64-228.siemens.flowmailer.net with ESMTPSA id 202401031812283f05e12a00c27eef1f for ; Wed, 03 Jan 2024 19:12:28 +0100 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; s=fm1; d=siemens.com; i=jan.kiszka@siemens.com; h=Date:From:Subject:To:Message-ID:MIME-Version:Content-Type:Content-Transfer-Encoding:Cc:References:In-Reply-To; bh=AP2MQZj1TBCyAPH6MXRlRUevHBIT68hWqQPM8+lFeHo=; b=RUcpp1MCOC5UT7nQhDe281XkRe5LVeVaPpFS8Id4E6Bm32sctXg6esVW8n4GA+nfOQWkTZ HlKRM5UHG04xQwxT/ppCXxh2ZmnM2ATna73qEc3X+VGiLe6HY7HFQ9qHEre3mtUzD3Ay0F/q 6KI+qv2Qs1TywjMpzPwi8S9S6KfQI=; From: Jan Kiszka To: Nishanth Menon , Vignesh Raghavendra , Tero Kristo , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Bao Cheng Su , Chao Zeng , Li Hua Qian Subject: [PATCH v2 7/7] arm64: dts: ti: iot2050: Support IOT2050-SM variant Date: Wed, 3 Jan 2024 19:12:24 +0100 Message-Id: <7804b2d7de24532e93e54c2d2a10e2b8f4afdadd.1704305544.git.jan.kiszka@siemens.com> In-Reply-To: References: Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Flowmailer-Platform: Siemens Feedback-ID: 519:519-294854:519-21489:flowmailer From: Baocheng Su Main differences between the new variant and Advanced PG2: 1. Arduino interface is removed. Instead, an new ASIC is added for communicating with PLC 1200 signal modules. 2. USB 3.0 type A connector is removed, only USB 2.0 type A connector is available. 3. DP interface is removed. Instead, to communicate with PLC 1200 signal modules, a USB 3.0 type B connector is added but the signals are actually not USB. 4. DDR size is increased to 4 GB. 5. Two sensors are added, one tilt sensor and one light sensor. The light sensor it not yet added to the DT at this stage as it depends on to-be-added bindings. Co-developed-by: Chao Zeng Signed-off-by: Chao Zeng Co-developed-by: Li Hua Qian Signed-off-by: Li Hua Qian Signed-off-by: Baocheng Su [Jan: rebase over dtsi refactorings, split-out light sensor, improve LEDs] Signed-off-by: Jan Kiszka --- arch/arm64/boot/dts/ti/Makefile | 1 + .../dts/ti/k3-am6548-iot2050-advanced-sm.dts | 189 ++++++++++++++++++ 2 files changed, 190 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 77a347f9f47d..9b15eaad284c 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -53,6 +53,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-sm.dtb dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-am654-evm.dtb diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts new file mode 100644 index 000000000000..338834fda566 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) Siemens AG, 2023 + * + * Authors: + * Baocheng Su + * Chao Zeng + * Huaqian Li + * + * AM6548-based (quad-core) IOT2050 SM variant, Product Generation 2 + * 4 GB RAM, 16 GB eMMC, USB-serial converter on connector X30 + * + * Product homepage: + * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html + */ + +/dts-v1/; + +#include "k3-am6548-iot2050-advanced-common.dtsi" +#include "k3-am65-iot2050-common-pg2.dtsi" + +/ { + compatible = "siemens,iot2050-advanced-sm", "ti,am654"; + model = "SIMATIC IOT2050 Advanced SM"; + + memory@80000000 { + device_type = "memory"; + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + }; + + aliases { + spi1 = &main_spi0; + }; + + leds { + pinctrl-0 = <&leds_pins_default>, <&user1_led_pins>; + + led-2 { + gpios = <&wkup_gpio0 52 GPIO_ACTIVE_HIGH>; + }; + + led-3 { + gpios = <&wkup_gpio0 53 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&main_pmx0 { + main_pcie_enable_pins_default: main-pcie-enable-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x01d8, PIN_OUTPUT, 7) /* (AH12) GPIO1_22 */ + >; + }; + + main_spi0_pins: main-spi0-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */ + AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */ + AM65X_IOPAD(0x01cc, PIN_INPUT, 0) /* (AD13) SPI0_D1 */ + AM65X_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (AG13) SPI0_CS0 */ + >; + }; +}; + +&main_pmx1 { + asic_spi_mux_ctrl_pin: asic-spi-mux-ctrl-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x0010, PIN_OUTPUT, 7) /* (D21) GPIO1_86 */ + >; + }; +}; + +&wkup_pmx0 { + user1_led_pins: user1-led-default-pins { + pinctrl-single,pins = < + /* (AB1) WKUP_UART0_RXD:WKUP_GPIO0_52, as USER 1 led red */ + AM65X_WKUP_IOPAD(0x00a0, PIN_OUTPUT, 7) + /* (AB5) WKUP_UART0_TXD:WKUP_GPIO0_53, as USER 1 led green */ + AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 7) + >; + }; + + soc_asic_pins: soc-asic-default-pins { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 7) /* (P4) WKUP_GPIO0_29 */ + AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7) /* (P5) WKUP_GPIO0_30 */ + AM65X_WKUP_IOPAD(0x004c, PIN_INPUT, 7) /* (P1) WKUP_GPIO0_31 */ + >; + }; +}; + +&main_gpio0 { + gpio-line-names = "main_gpio0-base"; +}; + +&main_gpio1 { + pinctrl-names = "default"; + pinctrl-0 = + <&cp2102n_reset_pin_default>, + <&main_pcie_enable_pins_default>, + <&asic_spi_mux_ctrl_pin>; + gpio-line-names = + /* 0..9 */ + "", "", "", "", "", "", "", "", "", "", + /* 10..19 */ + "", "", "", "", "", "", "", "", "", "", + /* 20..29 */ + "", "", "", "", "CP2102N-RESET", "", "", "", "", "", + /* 30..39 */ + "", "", "", "", "", "", "", "", "", "", + /* 40..49 */ + "", "", "", "", "", "", "", "", "", "", + /* 50..59 */ + "", "", "", "", "", "", "", "", "", "", + /* 60..69 */ + "", "", "", "", "", "", "", "", "", "", + /* 70..79 */ + "", "", "", "", "", "", "", "", "", "", + /* 80..86 */ + "", "", "", "", "", "", "ASIC-spi-mux-ctrl"; +}; + +&wkup_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = + <&push_button_pins_default>, + <&db9_com_mode_pins_default>, + <&soc_asic_pins>; + gpio-line-names = + /* 0..9 */ + "wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0", + "UART0-enable", "UART0-terminate", "", "WIFI-disable", + /* 10..19 */ + "", "", "", "", "", "", "", "", "", "", + /* 20..29 */ + "", "", "", "", "", "USER-button", "", "", "","ASIC-gpio-0", + /* 30..31 */ + "ASIC-gpio-1", "ASIC-gpio-2"; +}; + +&main_spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_spi0_pins>; + + #address-cells = <1>; + #size-cells= <0>; +}; + +&mcu_spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_spi0_pins_default>; +}; + +&main_i2c3 { + accelerometer: lsm6dso@6a { + compatible = "st,lsm6dso"; + reg = <0x6a>; + }; +}; + +&dss { + status = "disabled"; +}; + +&serdes0 { + assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; + assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>; +}; + +&serdes1 { + status = "disabled"; +}; + +&pcie0_rc { + pinctrl-names = "default"; + pinctrl-0 = <&minipcie_pins_default>; + + num-lanes = <1>; + phys = <&serdes0 PHY_TYPE_PCIE 1>; + phy-names = "pcie-phy0"; + reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pcie1_rc { + status = "disabled"; +};