diff mbox series

[v10,08/11] dt-bindings: regulator: bd9576 add FET ON-resistance for OCW

Message ID 5f12c473d6264ce66b598ac13c7ae2ce516e4483.1621333893.git.matti.vaittinen@fi.rohmeurope.com
State Superseded
Headers show
Series [v10,01/11] dt_bindings: Add protection limit properties | expand

Commit Message

Vaittinen, Matti May 18, 2021, 11:28 a.m. UTC 
BD9576MUF provides over-current protection and detection. Current is
measured as voltage loss over external FET. Allow specifying FET's on
resistance so current monitoring limits can be converted to voltages.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Rob Herring <robh@kernel.org>

---
v5 onwards:
  - No changes
v4:
  - Fixed the description indentiation
---
 .../bindings/regulator/rohm,bd9576-regulator.yaml           | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
index b6515a0cee62..7cb74cc8c5d9 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
@@ -27,6 +27,12 @@  patternProperties:
       Properties for single regulator.
     $ref: "regulator.yaml#"
 
+    properties:
+      rohm,ocw-fet-ron-micro-ohms:
+        description: |
+          External FET's ON-resistance. Required if VoutS1 OCP/OCW is
+          to be set.
+
     required:
       - regulator-name