diff mbox series

[v6,06/17] dt-bindings: display: bridge: convert analogix_dp.txt to yaml

Message ID 489e7bd3-fa26-885f-4104-8b0b29aa4f2b@gmail.com
State Accepted
Commit 440112adadd3e273d2a2ff6e5d4b969ee03fda47
Headers show
Series None | expand

Commit Message

Johan Jonker Dec. 22, 2022, 2:26 p.m. UTC
Convert analogix_dp.txt to yaml for use as common document.

Changed:
  Relexed requirements

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 .../bindings/display/bridge/analogix,dp.yaml  | 63 +++++++++++++++++++
 .../bindings/display/bridge/analogix_dp.txt   | 51 ---------------
 .../bindings/display/exynos/exynos_dp.txt     |  2 +-
 3 files changed, 64 insertions(+), 52 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
 delete mode 100644 Documentation/devicetree/bindings/display/bridge/analogix_dp.txt

--
2.20.1
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
new file mode 100644
index 000000000..c9b06885c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
@@ -0,0 +1,63 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/analogix,dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix Display Port bridge
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks: true
+
+  clock-names: true
+
+  phys: true
+
+  phy-names:
+    const: dp
+
+  force-hpd:
+    description:
+      Indicate driver need force hpd when hpd detect failed, this
+      is used for some eDP screen which don not have a hpd signal.
+
+  hpd-gpios:
+    description:
+      Hotplug detect GPIO.
+      Indicates which GPIO should be used for hotplug detection
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input node to receive pixel data.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a dp-connector node.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - ports
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
deleted file mode 100644
index 027d76c27..000000000
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ /dev/null
@@ -1,51 +0,0 @@ 
-Analogix Display Port bridge bindings
-
-Required properties for dp-controller:
-	-compatible:
-		platform specific such as:
-		 * "samsung,exynos5-dp"
-		 * "rockchip,rk3288-dp"
-		 * "rockchip,rk3399-edp"
-	-reg:
-		physical base address of the controller and length
-		of memory mapped region.
-	-interrupts:
-		interrupt combiner values.
-	-clocks:
-		from common clock binding: handle to dp clock.
-	-clock-names:
-		from common clock binding: Shall be "dp".
-	-phys:
-		from general PHY binding: the phandle for the PHY device.
-	-phy-names:
-		from general PHY binding: Should be "dp".
-
-Optional properties for dp-controller:
-	-force-hpd:
-		Indicate driver need force hpd when hpd detect failed, this
-		is used for some eDP screen which don't have hpd signal.
-	-hpd-gpios:
-		Hotplug detect GPIO.
-		Indicates which GPIO should be used for hotplug detection
-	-port@[X]: SoC specific port nodes with endpoint definitions as defined
-		in Documentation/devicetree/bindings/media/video-interfaces.txt,
-		please refer to the SoC specific binding document:
-		* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
-		* Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
--------------------------------------------------------------------------------
-
-Example:
-
-	dp-controller {
-		compatible = "samsung,exynos5-dp";
-		reg = <0x145b0000 0x10000>;
-		interrupts = <10 3>;
-		interrupt-parent = <&combiner>;
-		clocks = <&clock 342>;
-		clock-names = "dp";
-
-		phys = <&dp_phy>;
-		phy-names = "dp";
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 9b6cba3f8..3a4015903 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -50,7 +50,7 @@  Optional properties for dp-controller:
 		Documentation/devicetree/bindings/display/panel/display-timing.txt

 For the below properties, please refer to Analogix DP binding document:
- * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+ * Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
 	-phys (required)
 	-phy-names (required)
 	-hpd-gpios (optional)