[v2,2/2] arm: dts: nxp: imx: Add support for Apalis Evaluation Board v1.2

Message ID	20240124141849.26254-3-hiagofranco@gmail.com
State	New
Headers	show Received: from mail-pf1-f177.google.com (mail-pf1-f177.google.com [209.85.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id F37547C0A3; Wed, 24 Jan 2024 14:21:17 +0000 (UTC) From: Hiago De Franco <hiagofranco@gmail.com> To: Shawn Guo <shawnguo@kernel.org>, linux-arm-kernel@lists.infradead.org Cc: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Hiago De Franco <hiago.franco@toradex.com>, Francesco Dolcini <francesco.dolcini@toradex.com> Subject: [PATCH v2 2/2] arm: dts: nxp: imx: Add support for Apalis Evaluation Board v1.2 Date: Wed, 24 Jan 2024 11:13:20 -0300 Message-ID: <20240124141849.26254-3-hiagofranco@gmail.com> In-Reply-To: <20240124141849.26254-1-hiagofranco@gmail.com> References: <20240124141849.26254-1-hiagofranco@gmail.com> Precedence: bulk MIME-Version: 1.0 Content-Transfer-Encoding: 8bit
Series	[v2,1/2] dt-bindings: arm: fsl: Add toradex,apalis_imx6q-eval-v1.2 board \| expand [v2,1/2] dt-bindings: arm: fsl: Add toradex,apalis_imx6q-eval-v1.2 board [v2,2/2] arm: dts: nxp: imx: Add support for Apalis Evaluation Board v1.2

diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile index a724d1a7a9a0..0473f9b86ec7 100644 --- a/arch/arm/boot/dts/nxp/imx/Makefile +++ b/arch/arm/boot/dts/nxp/imx/Makefile @@ -147,6 +147,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-yapp4-phoenix.dtb \ imx6dl-yapp4-ursa.dtb \ imx6q-apalis-eval.dtb \ + imx6q-apalis-eval-v1.2.dtb \ imx6q-apalis-ixora.dtb \ imx6q-apalis-ixora-v1.1.dtb \ imx6q-apalis-ixora-v1.2.dtb \ diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval-v1.2.dts new file mode 100644 index 000000000000..15d4a98ee976 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval-v1.2.dts @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2024 Toradex + */ + +/dts-v1/; + +#include "imx6q-apalis-eval.dtsi" + +/ { + model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board v1.2"; + compatible = "toradex,apalis_imx6q-eval-v1.2", "toradex,apalis_imx6q", + "fsl,imx6q"; + + reg_3v3_mmc: regulator-3v3-mmc { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_3v3_mmc>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3.3V_MMC"; + startup-delay-us = <10000>; + }; + + reg_3v3_sd: regulator-3v3-sd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_3v3_sd>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3.3V_SD"; + startup-delay-us = <10000>; + }; + + reg_can1: regulator-can1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_can1_power>; + regulator-name = "5V_SW_CAN1"; + startup-delay-us = <10000>; + }; + + reg_can2: regulator-can2 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_can2_power>; + regulator-name = "5V_SW_CAN2"; + startup-delay-us = <10000>; + }; + + sound-carrier { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,name = "apalis-nau8822"; + simple-audio-card,routing = + "Headphones", "LHP", + "Headphones", "RHP", + "Speaker", "LSPK", + "Speaker", "RSPK", + "Line Out", "AUXOUT1", + "Line Out", "AUXOUT2", + "LAUX", "Line In", + "RAUX", "Line In", + "LMICP", "Mic In", + "RMICP", "Mic In"; + simple-audio-card,widgets = + "Headphones", "Headphones", + "Line Out", "Line Out", + "Speaker", "Speaker", + "Microphone", "Mic In", + "Line", "Line In"; + + codec_dai: simple-audio-card,codec { + sound-dai = <&nau8822_1a>; + system-clock-frequency = <12288000>; + }; + + simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; + }; +}; + +&can1 { + xceiver-supply = <&reg_can1>; + status = "okay"; +}; + +&can2 { + xceiver-supply = <&reg_can2>; + status = "okay"; +}; + +/* I2C1_SDA/SCL on MXM3 209/211 */ +&i2c1 { + /* Audio Codec */ + nau8822_1a: audio-codec@1a { + compatible = "nuvoton,nau8822"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nau8822>; + #sound-dai-cells = <0>; + }; + + /* Current measurement into module VCC */ + hwmon@40 { + compatible = "ti,ina219"; + reg = <0x40>; + shunt-resistor = <5000>; + }; + + /* Temperature Sensor */ + temperature-sensor@4f { + compatible = "ti,tmp75c"; + reg = <0x4f>; + }; + + /* EEPROM */ + eeprom@57 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + size = <256>; + }; +}; + +&pcie { + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +/* MMC1 */ +&usdhc1 { + bus-width = <4>; + pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>; + vmmc-supply = <&reg_3v3_mmc>; + status = "okay"; +}; + +/* SD1 */ +&usdhc2 { + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>; + vmmc-supply = <&reg_3v3_sd>; + status = "okay"; +}; + +&iomuxc { + pinctrl_enable_3v3_mmc: enable3v3mmcgrp { + fsl,pins = < + /* MMC1_PWR_CTRL */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + >; + }; + + pinctrl_enable_3v3_sd: enable3v3sdgrp { + fsl,pins = < + /* SD1_PWR_CTRL */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + >; + }; + + pinctrl_enable_can1_power: enablecan1powergrp { + fsl,pins = < + /* CAN1_PWR_EN */ + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + >; + }; + + pinctrl_enable_can2_power: enablecan2powergrp { + fsl,pins = < + /* CAN2_PWR_EN */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + >; + }; + + pinctrl_nau8822: nau8822grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x130b0 + MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts index 3fc079dfd61e..e1077e2da5f4 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts @@ -7,29 +7,13 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include "imx6q.dtsi" -#include "imx6qdl-apalis.dtsi" +#include "imx6q-apalis-eval.dtsi" / { model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board"; compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q", "fsl,imx6q"; - aliases { - i2c0 = &i2c1; - i2c1 = &i2c3; - i2c2 = &i2c2; - rtc0 = &rtc_i2c; - rtc1 = &snvs_rtc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - reg_pcie_switch: regulator-pcie-switch { compatible = "regulator-fixed"; enable-active-high; @@ -40,14 +24,6 @@ reg_pcie_switch: regulator-pcie-switch { startup-delay-us = <100000>; status = "okay"; }; - - reg_3v3_sw: regulator-3v3-sw { - compatible = "regulator-fixed"; - regulator-always-on; - regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3300000>; - regulator-name = "3.3V_SW"; - }; }; &can1 { @@ -62,102 +38,22 @@ &can2 { /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ &i2c1 { - status = "okay"; - + /* PCIe Switch */ pcie-switch@58 { compatible = "plx,pex8605"; reg = <0x58>; }; - - /* M41T0M6 real time clock on carrier board */ - rtc_i2c: rtc@68 { - compatible = "st,m41t0"; - reg = <0x68>; - }; -}; - -/* - * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier - * board) - */ -&i2c3 { - status = "okay"; }; &pcie { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reset_moci>; - /* active-high meaning opposite of regular PERST# active-low polarity */ - reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - reset-gpio-active-high; vpcie-supply = <&reg_pcie_switch>; status = "okay"; }; -&pwm1 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&pwm3 { - status = "okay"; -}; - -&pwm4 { - status = "okay"; -}; - -&reg_usb_host_vbus { - status = "okay"; -}; - -&reg_usb_otg_vbus { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - &sound_spdif { status = "okay"; }; -&spdif { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&uart4 { - status = "okay"; -}; - -&uart5 { - status = "okay"; -}; - -&usbh1 { - disable-over-current; - vbus-supply = <&reg_usb_host_vbus>; - status = "okay"; -}; - -&usbotg { - disable-over-current; - vbus-supply = <&reg_usb_otg_vbus>; - status = "okay"; -}; - /* MMC1 */ &usdhc1 { status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi new file mode 100644 index 000000000000..b6c45ad3f430 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2014-2024 Toradex + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6q.dtsi" +#include "imx6qdl-apalis.dtsi" + +/ { + aliases { + i2c0 = &i2c1; + i2c1 = &i2c3; + i2c2 = &i2c2; + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_3v3_sw: regulator-3v3-sw { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3.3V_SW"; + }; +}; + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +/* + * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier + * board) + */ +&i2c3 { + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_moci>; + /* active-high meaning opposite of regular PERST# active-low polarity */ + reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + reset-gpio-active-high; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&reg_usb_host_vbus { + status = "okay"; +}; + +&reg_usb_otg_vbus { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&spdif { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbh1 { + disable-over-current; + vbus-supply = <&reg_usb_host_vbus>; + status = "okay"; +}; + +&usbotg { + disable-over-current; + vbus-supply = <&reg_usb_otg_vbus>; + status = "okay"; +};

[v2,2/2] arm: dts: nxp: imx: Add support for Apalis Evaluation Board v1.2

Commit Message

Patch