| Message ID | 20231229135154.675946-4-dario.binacchi@amarulasolutions.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add display support for stm32f769-disco board | expand |
diff --git a/arch/arm/boot/dts/st/stm32f769-disco.dts b/arch/arm/boot/dts/st/stm32f769-disco.dts index 5d12ae25b327..8632bd866272 100644 --- a/arch/arm/boot/dts/st/stm32f769-disco.dts +++ b/arch/arm/boot/dts/st/stm32f769-disco.dts @@ -92,9 +92,9 @@ usbotg_hs_phy: usb-phy { clock-names = "main_clk"; }; - mmc_vcard: mmc_vcard { + vcc_3v3: vcc_3v3 { compatible = "regulator-fixed"; - regulator-name = "mmc_vcard"; + regulator-name = "vcc_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; @@ -128,7 +128,7 @@ &rtc { &sdio2 { status = "okay"; - vmmc-supply = <&mmc_vcard>; + vmmc-supply = <&vcc_3v3>; cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>; broken-cd; pinctrl-names = "default", "opendrain", "sleep";
In the schematics of document UM2033, the power supply for the micro SD card is the same 3v3 voltage that is used to power other devices on the board. By generalizing the name of the voltage regulator, it can be referenced by other nodes in the device tree without creating misunderstandings. This patch is preparatory for future developments. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> --- arch/arm/boot/dts/st/stm32f769-disco.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)