| Message ID | 20231222094548.54103-5-william.qiu@starfivetech.com |
|---|---|
| State | Accepted |
| Commit | 8d01f741a046f6e7f8bff220518f00f72ceb7c75 |
| Headers | show |
| Series | StarFive's Pulse Width Modulation driver support | expand |
William Qiu wrote: > Add OpenCores PWM controller node and add PWM pins configuration > on VisionFive 2 board. > > Signed-off-by: William Qiu <william.qiu@starfivetech.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> > --- > .../jh7110-starfive-visionfive-2.dtsi | 22 +++++++++++++++++++ > arch/riscv/boot/dts/starfive/jh7110.dtsi | 9 ++++++++ > 2 files changed, 31 insertions(+) > > diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi > index b89e9791efa7..e08af8a830ab 100644 > --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi > +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi > @@ -323,6 +323,12 @@ reserved-data@600000 { > }; > }; > > +&pwm { > + pinctrl-names = "default"; > + pinctrl-0 = <&pwm_pins>; > + status = "okay"; > +}; > + > &spi0 { > pinctrl-names = "default"; > pinctrl-0 = <&spi0_pins>; > @@ -513,6 +519,22 @@ GPOEN_ENABLE, > }; > }; > > + pwm_pins: pwm-0 { > + pwm-pins { > + pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0, > + GPOEN_SYS_PWM0_CHANNEL0, > + GPI_NONE)>, > + <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1, > + GPOEN_SYS_PWM0_CHANNEL1, > + GPI_NONE)>; > + bias-disable; > + drive-strength = <12>; > + input-disable; > + input-schmitt-disable; > + slew-rate = <0>; > + }; > + }; > + > spi0_pins: spi0-0 { > mosi-pins { > pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD, > diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi > index 45213cdf50dc..1b782f2c1395 100644 > --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi > +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi > @@ -829,6 +829,15 @@ i2stx1: i2s@120c0000 { > status = "disabled"; > }; > > + pwm: pwm@120d0000 { > + compatible = "starfive,jh7110-pwm", "opencores,pwm-v1"; > + reg = <0x0 0x120d0000 0x0 0x10000>; > + clocks = <&syscrg JH7110_SYSCLK_PWM_APB>; > + resets = <&syscrg JH7110_SYSRST_PWM_APB>; > + #pwm-cells = <3>; > + status = "disabled"; > + }; > + > sfctemp: temperature-sensor@120e0000 { > compatible = "starfive,jh7110-temp"; > reg = <0x0 0x120e0000 0x0 0x10000>; > -- > 2.34.1 >
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index b89e9791efa7..e08af8a830ab 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -323,6 +323,12 @@ reserved-data@600000 { }; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + &spi0 { pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; @@ -513,6 +519,22 @@ GPOEN_ENABLE, }; }; + pwm_pins: pwm-0 { + pwm-pins { + pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0, + GPOEN_SYS_PWM0_CHANNEL0, + GPI_NONE)>, + <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1, + GPOEN_SYS_PWM0_CHANNEL1, + GPI_NONE)>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + spi0_pins: spi0-0 { mosi-pins { pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD, diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index 45213cdf50dc..1b782f2c1395 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -829,6 +829,15 @@ i2stx1: i2s@120c0000 { status = "disabled"; }; + pwm: pwm@120d0000 { + compatible = "starfive,jh7110-pwm", "opencores,pwm-v1"; + reg = <0x0 0x120d0000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_PWM_APB>; + resets = <&syscrg JH7110_SYSRST_PWM_APB>; + #pwm-cells = <3>; + status = "disabled"; + }; + sfctemp: temperature-sensor@120e0000 { compatible = "starfive,jh7110-temp"; reg = <0x0 0x120e0000 0x0 0x10000>;
Add OpenCores PWM controller node and add PWM pins configuration on VisionFive 2 board. Signed-off-by: William Qiu <william.qiu@starfivetech.com> --- .../jh7110-starfive-visionfive-2.dtsi | 22 +++++++++++++++++++ arch/riscv/boot/dts/starfive/jh7110.dtsi | 9 ++++++++ 2 files changed, 31 insertions(+)