@@ -3,7 +3,6 @@
// Copyright (c) 2018 MediaTek Inc.
#include <linux/bitops.h>
-#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/dma-mapping.h>
#include <linux/errno.h>
@@ -22,13 +21,10 @@
#define CMDQ_OP_CODE_MASK (0xff << CMDQ_OP_CODE_SHIFT)
#define CMDQ_NUM_CMD(t) (t->cmd_buf_size / CMDQ_INST_SIZE)
-#define CMDQ_GCE_NUM_MAX (2)
#define CMDQ_CURR_IRQ_STATUS 0x10
#define CMDQ_SYNC_TOKEN_UPDATE 0x68
#define CMDQ_THR_SLOT_CYCLES 0x30
-#define CMDQ_THR_BASE 0x100
-#define CMDQ_THR_SIZE 0x80
#define CMDQ_THR_WARM_RESET 0x00
#define CMDQ_THR_ENABLE_TASK 0x04
#define CMDQ_THR_SUSPEND_TASK 0x08
@@ -59,32 +55,6 @@
#define CMDQ_JUMP_BY_OFFSET 0x10000000
#define CMDQ_JUMP_BY_PA 0x10000001
-struct cmdq_thread {
- struct mbox_chan *chan;
- void __iomem *base;
- struct list_head task_busy_list;
- u32 priority;
-};
-
-struct cmdq_task {
- struct cmdq *cmdq;
- struct list_head list_entry;
- dma_addr_t pa_base;
- struct cmdq_thread *thread;
- struct cmdq_pkt *pkt; /* the packet sent from mailbox client */
-};
-
-struct cmdq {
- struct mbox_controller mbox;
- void __iomem *base;
- int irq;
- u32 irq_mask;
- const struct gce_plat *pdata;
- struct cmdq_thread *thread;
- struct clk_bulk_data clocks[CMDQ_GCE_NUM_MAX];
- bool suspended;
-};
-
struct gce_plat {
u32 thread_nr;
u8 shift;
@@ -7,10 +7,17 @@
#ifndef __MTK_CMDQ_MAILBOX_H__
#define __MTK_CMDQ_MAILBOX_H__
+#include <linux/clk.h>
+#include <linux/mailbox_controller.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/types.h>
+#define CMDQ_GCE_NUM_MAX 2
+
+#define CMDQ_THR_BASE 0x100
+#define CMDQ_THR_SIZE 0x80
+
#define CMDQ_INST_SIZE 8 /* instruction is 64-bit */
#define CMDQ_SUBSYS_SHIFT 16
#define CMDQ_OP_CODE_SHIFT 24
@@ -79,6 +86,32 @@ struct cmdq_pkt {
bool loop;
};
+struct cmdq_thread {
+ struct mbox_chan *chan;
+ void __iomem *base;
+ struct list_head task_busy_list;
+ u32 priority;
+};
+
+struct cmdq {
+ struct mbox_controller mbox;
+ void __iomem *base;
+ int irq;
+ u32 irq_mask;
+ const struct gce_plat *pdata;
+ struct cmdq_thread *thread;
+ struct clk_bulk_data clocks[CMDQ_GCE_NUM_MAX];
+ bool suspended;
+};
+
+struct cmdq_task {
+ struct cmdq *cmdq;
+ struct list_head list_entry;
+ dma_addr_t pa_base;
+ struct cmdq_thread *thread;
+ struct cmdq_pkt *pkt; /* the packet sent from mailbox client */
+};
+
u8 cmdq_get_shift_pa(struct mbox_chan *chan);
#endif /* __MTK_CMDQ_MAILBOX_H__ */
To support CMDQ secure driver, move some reuseable definition to header. - define: e.g. CMDQ_GCE_NUM_MAX, CMDQ_THR_BASE, CMDQ_THR_SIZE. - struct: e.g. cmdq_thread, cmdq, cmdq_task. - include: e.g. <linux/clk.h>. Add "#include <linux/mailbox_controller.h>" for the function that takes "struct mbox_chan * chan" as a parameter. That may occur a build error if secure driver header includes the mtk-cmdq-mailbox.h. - function: e.g. cmdq_get_shift_pa(struct mbox_chan *chan). Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> --- drivers/mailbox/mtk-cmdq-mailbox.c | 30 --------------------- include/linux/mailbox/mtk-cmdq-mailbox.h | 33 ++++++++++++++++++++++++ 2 files changed, 33 insertions(+), 30 deletions(-)