@@ -597,6 +597,7 @@ vpu: video-codec@fdea0400 {
compatible = "rockchip,rk3568-vpu";
reg = <0x0 0xfdea0000 0x0 0x800>;
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vdpu";
clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
clock-names = "aclk", "hclk";
iommus = <&vdpu_mmu>;
@@ -819,7 +820,6 @@ hdmi: hdmi@fe0a0000 {
clock-names = "iahb", "isfr", "cec", "ref";
pinctrl-names = "default";
pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
- power-domains = <&power RK3568_PD_VO>;
reg-io-width = <4>;
rockchip,grf = <&grf>;
#sound-dai-cells = <0>;
@@ -1123,7 +1123,7 @@ i2s2_2ch: i2s@fe420000 {
dmas = <&dmac1 4>, <&dmac1 5>;
dma-names = "tx", "rx";
resets = <&cru SRST_M_I2S2_2CH>;
- reset-names = "m";
+ reset-names = "tx-m", "rx-m";
rockchip,grf = <&grf>;
pinctrl-names = "default";
pinctrl-0 = <&i2s2m0_sclktx
@@ -1739,6 +1739,7 @@ csi_dphy: phy@fe870000 {
clocks = <&cru PCLK_MIPICSIPHY>;
clock-names = "pclk";
#phy-cells = <0>;
+ power-domains = <&power RK3568_PD_VO>;
resets = <&cru SRST_P_MIPICSIPHY>;
reset-names = "apb";
rockchip,grf = <&grf>;
devicetree checks show some warnings: video-codec@fdea0400: 'interrupt-names' is a required property from schema $id: http://devicetree.org/schemas/media/rockchip-vpu.yaml# hdmi@fe0a0000: Unevaluated properties are not allowed ('power-domains' were unexpected) from schema $id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-hdmi.yaml# i2s@fe420000: reset-names:0: 'm' is not one of ['tx-m', 'rx-m'] from schema $id: http://devicetree.org/schemas/sound/rockchip,i2s-tdm.yaml# phy@fe870000: 'power-domains' is a required property from schema $id: http://devicetree.org/schemas/phy/rockchip-inno-csi-dphy.yaml# Fix them by - setting a interrupt-name for the video-codec - remove the unevaluated power-domain property from hdmi - set reset-names according to the spec for i2s - add a power-domain property for the CSI phy Signed-off-by: Manuel Traut <manut@mecka.net> --- arch/arm64/boot/dts/rockchip/rk356x.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)