From patchwork Wed Dec 6 14:41:10 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Frieder Schrempf X-Patchwork-Id: 751335 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=fris.de header.i=@fris.de header.b="UCYx6MrK" Received: from mail.fris.de (mail.fris.de [116.203.77.234]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 690B6D59; Wed, 6 Dec 2023 06:44:39 -0800 (PST) Received: from [127.0.0.1] (localhost [127.0.0.1]) by localhost (Mailerdaemon) with ESMTPSA id 7D5BBC0131; Wed, 6 Dec 2023 15:44:37 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=fris.de; s=dkim; t=1701873877; h=from:subject:date:message-id:to:cc:mime-version: content-transfer-encoding:in-reply-to:references; bh=tMSX8hysbUP88C2UKn2uKuZ0nkUjhmVSfTTqVo0O4Rk=; b=UCYx6MrKF2ksjayBn+9pCB7GcXteUArdpZEbvpemiq9EoFtB6F5KJRTOLoLDrDgHkUaaQ2 a2ZGwYnDTiBDr8feqKWexaJe2ecbJLgR9FP4nyvd7UD3VtXyFCHbqLPYlsQhi5UkffJKhf AXMrdK8+JGZE+0yoLXIEZKTRh7Vc7GXoQIoPJDGQ1+gMuNWnCvRZCa8gKt802Bg0MmquVf Icd+IEfeP/6sXRwds38WlNLlpxqWzSFW3Vz4vKrvyyaWiHfO50ZkwBfGRcek7Iy4LtfGdE 8yy66P5hCkEfJlolNgJoem27FilAp9hrz+Li+K51jgvCfYREqHS4gFqPBUQF3g== From: Frieder Schrempf To: Conor Dooley , devicetree@vger.kernel.org, Frieder Schrempf , Krzysztof Kozlowski , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Rob Herring , Sascha Hauer , Shawn Guo Cc: Fabio Estevam , NXP Linux Team , Pengutronix Kernel Team Subject: [PATCH v3 07/14] arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals on BL OSM-S board Date: Wed, 6 Dec 2023 15:41:10 +0100 Message-ID: <20231206144201.46911-8-frieder@fris.de> In-Reply-To: <20231206144201.46911-1-frieder@fris.de> References: <20231206144201.46911-1-frieder@fris.de> Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Last-TLS-Session-Version: TLSv1.3 From: Frieder Schrempf Some signals have external pullup resistors on the board and don't need the internal ones to be enabled. Due to silicon errata ERR050080 let's disable the internal pull resistors whererever possible and prevent any unwanted behavior in case they wear out. Fixes: de9618e84f76 ("arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S") Signed-off-by: Frieder Schrempf --- Changes for v3: * none Changes for v2: * none --- .../dts/freescale/imx8mm-kontron-bl-osm-s.dts | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts index 1dd03ef0a7835..d9fa0deea7002 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts @@ -337,40 +337,40 @@ MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 pinctrl_usdhc2: usdhc2grp { fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x90 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 >; }; pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x94 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 >; }; pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x96 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xd0 >; }; };