From patchwork Thu Nov 30 01:36:12 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Anjelique Melendez X-Patchwork-Id: 748720 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="W87tQg44" Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 26AB110D0; Wed, 29 Nov 2023 17:36:54 -0800 (PST) Received: from pps.filterd (m0279866.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3AU1Pamq032194; Thu, 30 Nov 2023 01:36:43 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=z7vCenW+s8jD6N91Dun9+yvksCrwwQbb7lO1Xd33+Vg=; b=W87tQg44sMes0Qi7MLdi9Bu2u0sJYqfDy/YIJ24/wIALOEHMeWrd7SiIq1HhFiShSV95 4HHaa3u+NOX5WE8knS1W9aZ8jq3i7eglp7mTN1FIZ3kCaTwYsdR5f4kanUSD2Oumvnxy U7AKGinboWjnSj1abkOZc8TIDHEse9D5sNX8SYFlCMRpTKjg+2BDFEo+B7KbY9d4FzCW 5nilsCJucSs9yuoZvn12g3pqgmKpxW6bTKKKM/VncSuDOdFm5ZOFeyXtLvgVRs0mQ/gR vlOpU2WHH17JRsKsTxuRVQu3wE7XenGTYl3ujvlOqWVCBW29YaE+ReNL/Dk3lAGUp7Wm Bg== Received: from nalasppmta01.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3unmrac5x9-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 30 Nov 2023 01:36:42 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA01.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 3AU1afJK014531 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 30 Nov 2023 01:36:41 GMT Received: from hu-amelende-lv.qualcomm.com (10.49.16.6) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.40; Wed, 29 Nov 2023 17:36:41 -0800 From: Anjelique Melendez To: , , , , , , , CC: , , , , , , , , , , "Anjelique Melendez" Subject: [PATCH v7 4/7] leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM Date: Wed, 29 Nov 2023 17:36:12 -0800 Message-ID: <20231130013615.14287-5-quic_amelende@quicinc.com> X-Mailer: git-send-email 2.41.0 In-Reply-To: <20231130013615.14287-1-quic_amelende@quicinc.com> References: <20231130013615.14287-1-quic_amelende@quicinc.com> Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ClientProxiedBy: nalasex01a.na.qualcomm.com (10.47.209.196) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: KyljuQQqpYr1NrPodmmwCY76ZLjDv6oX X-Proofpoint-ORIG-GUID: KyljuQQqpYr1NrPodmmwCY76ZLjDv6oX X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-11-29_21,2023-11-29_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 impostorscore=0 malwarescore=0 priorityscore=1501 suspectscore=0 mlxscore=0 clxscore=1015 lowpriorityscore=0 bulkscore=0 adultscore=0 spamscore=0 phishscore=0 mlxlogscore=999 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2311300010 In some PMICs like pmi632, the pattern look up table (LUT) and LPG configuration is stored in a single SDAM module instead of LUT peripheral. This feature is called PPG. PPG uses Qualcomm Programmable Boot Sequencer (PBS) inorder to trigger pattern sequences for PMICs. Signed-off-by: Anjelique Melendez Tested-by: Luca Weiss --- drivers/leds/rgb/leds-qcom-lpg.c | 264 ++++++++++++++++++++++++++++--- 1 file changed, 242 insertions(+), 22 deletions(-) diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c index 68d82a682bf6..a3e4adffb8df 100644 --- a/drivers/leds/rgb/leds-qcom-lpg.c +++ b/drivers/leds/rgb/leds-qcom-lpg.c @@ -8,11 +8,13 @@ #include #include #include +#include #include #include #include #include #include +#include #define LPG_SUBTYPE_REG 0x05 #define LPG_SUBTYPE_LPG 0x2 @@ -39,6 +41,8 @@ #define PWM_SEC_ACCESS_REG 0xd0 #define PWM_DTEST_REG(x) (0xe2 + (x) - 1) +#define SDAM_REG_PBS_SEQ_EN 0x42 + #define TRI_LED_SRC_SEL 0x45 #define TRI_LED_EN_CTL 0x46 #define TRI_LED_ATC_CTL 0x47 @@ -48,9 +52,25 @@ #define LPG_RESOLUTION_9BIT BIT(9) #define LPG_RESOLUTION_15BIT BIT(15) +#define PPG_MAX_LED_BRIGHTNESS 255 + #define LPG_MAX_M 7 #define LPG_MAX_PREDIV 6 +#define DEFAULT_TICK_DURATION_US 7800 +#define RAMP_STEP_DURATION(x) (((x) * 1000 / DEFAULT_TICK_DURATION_US) & 0xff) + +/* LPG common config settings for PPG */ +#define SDAM_REG_RAMP_STEP_DURATION 0x47 +#define SDAM_LPG_SDAM_LUT_PATTERN_OFFSET 0x80 + +/* LPG per channel config settings for PPG */ +#define SDAM_LUT_EN_OFFSET 0x0 +#define SDAM_PATTERN_CONFIG_OFFSET 0x1 +#define SDAM_END_INDEX_OFFSET 0x3 +#define SDAM_START_INDEX_OFFSET 0x4 +#define SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET 0x6 + struct lpg_channel; struct lpg_data; @@ -64,6 +84,9 @@ struct lpg_data; * @lut_base: base address of the LUT block (optional) * @lut_size: number of entries in the LUT block * @lut_bitmap: allocation bitmap for LUT entries + * @pbs_dev: PBS device + * @lpg_chan_sdam: LPG SDAM peripheral device + * @pbs_en_bitmap: bitmap for tracking PBS triggers * @triled_base: base address of the TRILED block (optional) * @triled_src: power-source for the TRILED * @triled_has_atc_ctl: true if there is TRI_LED_ATC_CTL register @@ -85,6 +108,10 @@ struct lpg { u32 lut_size; unsigned long *lut_bitmap; + struct pbs_dev *pbs_dev; + struct nvmem_device *lpg_chan_sdam; + unsigned long pbs_en_bitmap; + u32 triled_base; u32 triled_src; bool triled_has_atc_ctl; @@ -101,6 +128,7 @@ struct lpg { * @triled_mask: mask in TRILED to enable this channel * @lut_mask: mask in LUT to start pattern generator for this channel * @subtype: PMIC hardware block subtype + * @sdam_offset: channel offset in LPG SDAM * @in_use: channel is exposed to LED framework * @color: color of the LED attached to this channel * @dtest_line: DTEST line for output, or 0 if disabled @@ -129,6 +157,7 @@ struct lpg_channel { unsigned int triled_mask; unsigned int lut_mask; unsigned int subtype; + u32 sdam_offset; bool in_use; @@ -178,10 +207,12 @@ struct lpg_led { /** * struct lpg_channel_data - per channel initialization data + * @sdam_offset: Channel offset in LPG SDAM * @base: base address for PWM channel registers * @triled_mask: bitmask for controlling this channel in TRILED */ struct lpg_channel_data { + unsigned int sdam_offset; unsigned int base; u8 triled_mask; }; @@ -206,6 +237,52 @@ struct lpg_data { const struct lpg_channel_data *channels; }; +#define PBS_SW_TRIG_BIT BIT(0) + +static int lpg_clear_pbs_trigger(struct lpg *lpg, unsigned int lut_mask) +{ + u8 val = 0; + int rc; + + lpg->pbs_en_bitmap &= (~lut_mask); + if (!lpg->pbs_en_bitmap) { + rc = nvmem_device_write(lpg->lpg_chan_sdam, SDAM_REG_PBS_SEQ_EN, 1, &val); + if (rc < 0) + return rc; + } + + return 0; +} + +static int lpg_set_pbs_trigger(struct lpg *lpg, unsigned int lut_mask) +{ + u8 val = PBS_SW_TRIG_BIT; + int rc; + + if (!lpg->pbs_en_bitmap) { + rc = nvmem_device_write(lpg->lpg_chan_sdam, SDAM_REG_PBS_SEQ_EN, 1, &val); + if (rc < 0) + return rc; + + rc = qcom_pbs_trigger_event(lpg->pbs_dev, val); + if (rc < 0) + return rc; + } + lpg->pbs_en_bitmap |= lut_mask; + + return 0; +} + +static int lpg_sdam_configure_triggers(struct lpg_channel *chan, u8 set_trig) +{ + u32 addr = SDAM_LUT_EN_OFFSET + chan->sdam_offset; + + if (!chan->lpg->lpg_chan_sdam) + return 0; + + return nvmem_device_write(chan->lpg->lpg_chan_sdam, addr, 1, &set_trig); +} + static int triled_set(struct lpg *lpg, unsigned int mask, unsigned int enable) { /* Skip if we don't have a triled block */ @@ -216,6 +293,40 @@ static int triled_set(struct lpg *lpg, unsigned int mask, unsigned int enable) mask, enable); } +static int lpg_lut_store_sdam(struct lpg *lpg, struct led_pattern *pattern, + size_t len, unsigned int *lo_idx, unsigned int *hi_idx) +{ + unsigned int idx; + u8 brightness; + int i, rc; + u16 addr; + + if (len > lpg->lut_size) { + dev_err(lpg->dev, "Pattern length (%zu) exceeds maximum pattern length (%d)\n", + len, lpg->lut_size); + return -EINVAL; + } + + idx = bitmap_find_next_zero_area(lpg->lut_bitmap, lpg->lut_size, 0, len, 0); + if (idx >= lpg->lut_size) + return -ENOSPC; + + for (i = 0; i < len; i++) { + brightness = pattern[i].brightness; + addr = SDAM_LPG_SDAM_LUT_PATTERN_OFFSET + i + idx; + rc = nvmem_device_write(lpg->lpg_chan_sdam, addr, 1, &brightness); + if (rc < 0) + return rc; + } + + bitmap_set(lpg->lut_bitmap, idx, len); + + *lo_idx = idx; + *hi_idx = idx + len - 1; + + return 0; +} + static int lpg_lut_store(struct lpg *lpg, struct led_pattern *pattern, size_t len, unsigned int *lo_idx, unsigned int *hi_idx) { @@ -256,6 +367,9 @@ static void lpg_lut_free(struct lpg *lpg, unsigned int lo_idx, unsigned int hi_i static int lpg_lut_sync(struct lpg *lpg, unsigned int mask) { + if (!lpg->lut_base) + return 0; + return regmap_write(lpg->map, lpg->lut_base + RAMP_CONTROL_REG, mask); } @@ -462,6 +576,28 @@ static void lpg_apply_pwm_value(struct lpg_channel *chan) #define LPG_PATTERN_CONFIG_PAUSE_HI BIT(1) #define LPG_PATTERN_CONFIG_PAUSE_LO BIT(0) +static void lpg_sdam_apply_lut_control(struct lpg_channel *chan) +{ + struct nvmem_device *lpg_chan_sdam = chan->lpg->lpg_chan_sdam; + unsigned int lo_idx = chan->pattern_lo_idx; + unsigned int hi_idx = chan->pattern_hi_idx; + u8 val = 0, conf = 0; + + if (!chan->ramp_enabled || chan->pattern_lo_idx == chan->pattern_hi_idx) + return; + + if (!chan->ramp_oneshot) + conf |= LPG_PATTERN_CONFIG_REPEAT; + + nvmem_device_write(lpg_chan_sdam, SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET + chan->sdam_offset, 1, &val); + nvmem_device_write(lpg_chan_sdam, SDAM_PATTERN_CONFIG_OFFSET + chan->sdam_offset, 1, &conf); + nvmem_device_write(lpg_chan_sdam, SDAM_END_INDEX_OFFSET + chan->sdam_offset, 1, &hi_idx); + nvmem_device_write(lpg_chan_sdam, SDAM_START_INDEX_OFFSET + chan->sdam_offset, 1, &lo_idx); + + val = RAMP_STEP_DURATION(chan->ramp_tick_ms); + nvmem_device_write(lpg_chan_sdam, SDAM_REG_RAMP_STEP_DURATION, 1, &val); +} + static void lpg_apply_lut_control(struct lpg_channel *chan) { struct lpg *lpg = chan->lpg; @@ -597,7 +733,10 @@ static void lpg_apply(struct lpg_channel *chan) lpg_apply_pwm_value(chan); lpg_apply_control(chan); lpg_apply_sync(chan); - lpg_apply_lut_control(chan); + if (chan->lpg->lpg_chan_sdam) + lpg_sdam_apply_lut_control(chan); + else + lpg_apply_lut_control(chan); lpg_enable_glitch(chan); } @@ -622,6 +761,7 @@ static void lpg_brightness_set(struct lpg_led *led, struct led_classdev *cdev, chan->ramp_enabled = false; } else if (chan->pattern_lo_idx != chan->pattern_hi_idx) { lpg_calc_freq(chan, NSEC_PER_MSEC); + lpg_sdam_configure_triggers(chan, 1); chan->enabled = true; chan->ramp_enabled = true; @@ -649,8 +789,10 @@ static void lpg_brightness_set(struct lpg_led *led, struct led_classdev *cdev, triled_set(lpg, triled_mask, triled_enabled); /* Trigger start of ramp generator(s) */ - if (lut_mask) + if (lut_mask) { lpg_lut_sync(lpg, lut_mask); + lpg_set_pbs_trigger(lpg, lut_mask); + } } static int lpg_brightness_single_set(struct led_classdev *cdev, @@ -836,18 +978,23 @@ static int lpg_pattern_set(struct lpg_led *led, struct led_pattern *led_pattern, * If the specified pattern is a palindrome the ping pong mode is * enabled. In this scenario the delta_t of the middle entry (i.e. the * last in the programmed pattern) determines the "high pause". + * + * SDAM-based devices do not support "ping-pong", "low pause" or "high pause" */ /* Detect palindromes and use "ping pong" to reduce LUT usage */ - for (i = 0; i < len / 2; i++) { - brightness_a = pattern[i].brightness; - brightness_b = pattern[len - i - 1].brightness; - - if (brightness_a != brightness_b) { - ping_pong = false; - break; + if (lpg->lut_base) { + for (i = 0; i < len / 2; i++) { + brightness_a = pattern[i].brightness; + brightness_b = pattern[len - i - 1].brightness; + + if (brightness_a != brightness_b) { + ping_pong = false; + break; + } } - } + } else + ping_pong = false; /* The pattern length to be written to the LUT */ if (ping_pong) @@ -875,12 +1022,26 @@ static int lpg_pattern_set(struct lpg_led *led, struct led_pattern *led_pattern, if (delta_t >= BIT(9)) goto out_free_pattern; - /* Find "low pause" and "high pause" in the pattern */ - lo_pause = pattern[0].delta_t; - hi_pause = pattern[actual_len - 1].delta_t; + /* + * Find "low pause" and "high pause" in the pattern in the LUT case. + * SDAM-based devices require equal duration of all steps + */ + if (lpg->lut_base) { + lo_pause = pattern[0].delta_t; + hi_pause = pattern[actual_len - 1].delta_t; + } else { + if (delta_t != pattern[0].delta_t || delta_t != pattern[actual_len - 1].delta_t) + goto out_free_pattern; + } + mutex_lock(&lpg->lock); - ret = lpg_lut_store(lpg, pattern, actual_len, &lo_idx, &hi_idx); + + if (lpg->lut_base) + ret = lpg_lut_store(lpg, pattern, actual_len, &lo_idx, &hi_idx); + else + ret = lpg_lut_store_sdam(lpg, pattern, actual_len, &lo_idx, &hi_idx); + if (ret < 0) goto out_unlock; @@ -928,7 +1089,12 @@ static int lpg_pattern_mc_set(struct led_classdev *cdev, { struct led_classdev_mc *mc = lcdev_to_mccdev(cdev); struct lpg_led *led = container_of(mc, struct lpg_led, mcdev); - int ret; + unsigned int triled_mask = 0; + int ret, i; + + for (i = 0; i < led->num_channels; i++) + triled_mask |= led->channels[i]->triled_mask; + triled_set(led->lpg, triled_mask, 0); ret = lpg_pattern_set(led, pattern, len, repeat); if (ret < 0) @@ -953,6 +1119,8 @@ static int lpg_pattern_clear(struct lpg_led *led) for (i = 0; i < led->num_channels; i++) { chan = led->channels[i]; + lpg_sdam_configure_triggers(chan, 0); + lpg_clear_pbs_trigger(chan->lpg, chan->lut_mask); chan->pattern_lo_idx = 0; chan->pattern_hi_idx = 0; } @@ -1187,8 +1355,8 @@ static int lpg_add_led(struct lpg *lpg, struct device_node *np) cdev->brightness_set_blocking = lpg_brightness_mc_set; cdev->blink_set = lpg_blink_mc_set; - /* Register pattern accessors only if we have a LUT block */ - if (lpg->lut_base) { + /* Register pattern accessors if we have a LUT block or when using PPG */ + if (lpg->lut_base || lpg->lpg_chan_sdam) { cdev->pattern_set = lpg_pattern_mc_set; cdev->pattern_clear = lpg_pattern_mc_clear; } @@ -1201,15 +1369,19 @@ static int lpg_add_led(struct lpg *lpg, struct device_node *np) cdev->brightness_set_blocking = lpg_brightness_single_set; cdev->blink_set = lpg_blink_single_set; - /* Register pattern accessors only if we have a LUT block */ - if (lpg->lut_base) { + /* Register pattern accessors if we have a LUT block or when using PPG */ + if (lpg->lut_base || lpg->lpg_chan_sdam) { cdev->pattern_set = lpg_pattern_single_set; cdev->pattern_clear = lpg_pattern_single_clear; } } cdev->default_trigger = of_get_property(np, "linux,default-trigger", NULL); - cdev->max_brightness = LPG_RESOLUTION_9BIT - 1; + + if (lpg->lpg_chan_sdam) + cdev->max_brightness = PPG_MAX_LED_BRIGHTNESS; + else + cdev->max_brightness = LPG_RESOLUTION_9BIT - 1; if (!of_property_read_string(np, "default-state", &state) && !strcmp(state, "on")) @@ -1250,6 +1422,7 @@ static int lpg_init_channels(struct lpg *lpg) chan->base = data->channels[i].base; chan->triled_mask = data->channels[i].triled_mask; chan->lut_mask = BIT(i); + chan->sdam_offset = data->channels[i].sdam_offset; regmap_read(lpg->map, chan->base + LPG_SUBTYPE_REG, &chan->subtype); } @@ -1296,11 +1469,12 @@ static int lpg_init_lut(struct lpg *lpg) { const struct lpg_data *data = lpg->data; - if (!data->lut_base) + if (!data->lut_size) return 0; - lpg->lut_base = data->lut_base; lpg->lut_size = data->lut_size; + if (data->lut_base) + lpg->lut_base = data->lut_base; lpg->lut_bitmap = devm_bitmap_zalloc(lpg->dev, lpg->lut_size, GFP_KERNEL); if (!lpg->lut_bitmap) @@ -1309,6 +1483,48 @@ static int lpg_init_lut(struct lpg *lpg) return 0; } +static int lpg_init_sdam(struct lpg *lpg) +{ + int i, sdam_count, rc; + u8 val = 0; + + sdam_count = of_property_count_strings(lpg->dev->of_node, "nvmem-names"); + if (sdam_count <= 0) + return 0; + + /* Get the SDAM device for LPG/LUT config */ + lpg->lpg_chan_sdam = devm_nvmem_device_get(lpg->dev, "lpg_chan_sdam"); + if (IS_ERR(lpg->lpg_chan_sdam)) + return dev_err_probe(lpg->dev, PTR_ERR(lpg->lpg_chan_sdam), + "Failed to get LPG chan SDAM device\n"); + + lpg->pbs_dev = get_pbs_client_device(lpg->dev); + if (IS_ERR(lpg->pbs_dev)) + return dev_err_probe(lpg->dev, PTR_ERR(lpg->pbs_dev), + "Failed to get PBS client device\n"); + + for (i = 0; i < lpg->num_channels; i++) { + struct lpg_channel *chan = &lpg->channels[i]; + + if (chan->sdam_offset) { + rc = nvmem_device_write(lpg->lpg_chan_sdam, + SDAM_PBS_SCRATCH_LUT_COUNTER_OFFSET + chan->sdam_offset, 1, &val); + if (rc < 0) + return rc; + + rc = lpg_sdam_configure_triggers(chan, 0); + if (rc < 0) + return rc; + + rc = lpg_clear_pbs_trigger(chan->lpg, chan->lut_mask); + if (rc < 0) + return rc; + } + } + + return 0; +} + static int lpg_probe(struct platform_device *pdev) { struct device_node *np; @@ -1345,6 +1561,10 @@ static int lpg_probe(struct platform_device *pdev) if (ret < 0) return ret; + ret = lpg_init_sdam(lpg); + if (ret < 0) + return ret; + ret = lpg_init_lut(lpg); if (ret < 0) return ret;