diff mbox series

[14/16] arm64: dts: qcom: sm8550-aim300: add sound card

Message ID 20231117101817.4401-15-quic_tengfan@quicinc.com
State New
Headers show
Series arm64: qcom: add sm8550-aim300 board support | expand

Commit Message

Tengfei Fan Nov. 17, 2023, 10:18 a.m. UTC 
Add the sound card node with tested playback over WSA8845 speakers and
WCD9385 headset over USB Type-C.

Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sm8550-aim300.dts | 82 ++++++++++++++++++++++
 1 file changed, 82 insertions(+)

Comments

Tengfei Fan Nov. 21, 2023, 1:04 a.m. UTC | #1 
在 11/17/2023 6:33 PM, Krzysztof Kozlowski 写道:
> On 17/11/2023 11:18, Tengfei Fan wrote:
>> Add the sound card node with tested playback over WSA8845 speakers and
>> WCD9385 headset over USB Type-C.
>>
>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/sm8550-aim300.dts | 82 ++++++++++++++++++++++
>>   1 file changed, 82 insertions(+)
>>
> 
> NAK, it's initial submission.
> 
> Stop useless splitting of work which is done. You cannot have "release
> late, release often". The rule is: "release early, release often".
> 
> Best regards,
> Krzysztof
> 

Hi Krzysztof,
In next version patch series, I'm going to combine all the splited 
functions into one patch.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8550-aim300.dts b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
index e7035f57ce44..6dc3040b9f76 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
@@ -107,6 +107,88 @@ 
 		};
 	};
 
+	sound {
+		compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8550-AIM300";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS1",
+				"VA DMIC1", "MIC BIAS1",
+				"VA DMIC2", "MIC BIAS3",
+				"TX DMIC0", "MIC BIAS1",
+				"TX DMIC1", "MIC BIAS2",
+				"TX DMIC2", "MIC BIAS3",
+				"TX SWR_ADC1", "ADC2_OUTPUT";
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&north_spkr>, <&south_spkr>,
+					    <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";