From patchwork Mon Nov 13 23:35:58 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 743531 Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 697E23E476 for ; Mon, 13 Nov 2023 23:36:05 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="cfIh0ft/" Received: from mail-lj1-x22f.google.com (mail-lj1-x22f.google.com [IPv6:2a00:1450:4864:20::22f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C67DBD55 for ; Mon, 13 Nov 2023 15:36:02 -0800 (PST) Received: by mail-lj1-x22f.google.com with SMTP id 38308e7fff4ca-2c50cf61f6dso69790581fa.2 for ; Mon, 13 Nov 2023 15:36:02 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1699918561; x=1700523361; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=fFEG72dBWYWsZUqmejoV0kt4Aj1zmT269T2kGi/rvFE=; b=cfIh0ft/c4RPIUf7lgrEzH37Qs67Hx/J/InZB114j91YjRzS2hcKz6GG6h/Qv/80jv JlpacTJOsmWeg5GC5dvaGB3ksAe0EHBEoPG1398VWYLbCBGf0bw8Rjc7hWn27zWDP9dB ytJrmEAx2qeQunna53u8Yk6CAeAZHiBUCTKM6qhbYhrE4Rkv+cnGfiiAQbrLtRvEaMmx H86p+oirK6/xOG20lpu81i72fCRLl+RAHRj6eMJoxAKGMeozof+0FQ2+e3djHGpfL1qg 6pMk+7HjouVIwI8pSqVz6DLkK67UE+DjOzbm2m5KJn+lYRSQlfqmFlDN3PYVy/io+XrK 4cgg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1699918561; x=1700523361; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=fFEG72dBWYWsZUqmejoV0kt4Aj1zmT269T2kGi/rvFE=; b=MvPUdLCSxRG9tJBXLHWl1yFQadcqBivBg+45355hbtD8nt/kpK+H8QPYyH+fStPFzY emh++mqmdlIW0jHVu77fZSvukZLCujs45kowAzM215j5Ig0wtZDSXf5NljlCV1j29Jhq IzcNKLjLMEvE23Hupud8JIb57q3RgXIGn0RI+VmRBAa3t9ajyqy2Fg3ztZJHb7odFEHB vI//IYgret7lj5u/jiFkAeYslb+n22dAKSglfefcE2ffgMG8kESsiBnNlsRpmPeKmdD2 UzXe23KpbuLyfTLM6/wFdiaD5GO3atElPm0Lq5RLd/uaZgteT+PyXsctj1HQxeaQa+7w RFYg== X-Gm-Message-State: AOJu0YzFMLkpgVDWxuZ6N/30G8WHGUih1ErdKPMFqr1+L3mGsiH0xq78 qJUUjoeja3326Di7Nxul/4VhAw== X-Google-Smtp-Source: AGHT+IHsxpzN1LwX0uHjACVOlXRRCh/qdwpBLxQITo7fbX1vKxySCKj4NH7WuHYVQ64JZUrQjBbUMA== X-Received: by 2002:a2e:8849:0:b0:2c8:2e3a:e974 with SMTP id z9-20020a2e8849000000b002c82e3ae974mr563412ljj.44.1699918561110; Mon, 13 Nov 2023 15:36:01 -0800 (PST) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id 17-20020a2e0611000000b002b70a8478ddsm1202859ljg.44.2023.11.13.15.36.00 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 13 Nov 2023 15:36:00 -0800 (PST) From: Linus Walleij Date: Tue, 14 Nov 2023 00:35:58 +0100 Subject: [PATCH net-next v8 3/9] ARM: dts: marvell: Fix some common switch mistakes Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231114-marvell-88e6152-wan-led-v8-3-50688741691b@linaro.org> References: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> In-Reply-To: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> To: Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Russell King , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Christian Marangi , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Linus Walleij , Florian Fainelli X-Mailer: b4 0.12.4 Fix some errors in the Marvell MV88E6xxx switch descriptions: - The top node had no address size or cells. - switch0@0 is not OK, should be ethernet-switch@0. - The ports node should be named ethernet-ports - The ethernet-ports node should have port@0 etc children, no plural "ports" in the children. - Ports should be named ethernet-port@0 etc - PHYs should be named ethernet-phy@0 etc This serves as an example of fixes needed for introducing a schema for the bindings, but the patch can simply be applied. Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: Linus Walleij Reviewed-by: Vladimir Oltean --- arch/arm/boot/dts/marvell/armada-370-rd.dts | 24 ++++++------ .../dts/marvell/armada-381-netgear-gs110emx.dts | 44 +++++++++++----------- .../dts/marvell/armada-385-clearfog-gtr-l8.dts | 38 +++++++++---------- .../dts/marvell/armada-385-clearfog-gtr-s4.dts | 22 +++++------ arch/arm/boot/dts/marvell/armada-385-linksys.dtsi | 18 ++++----- .../boot/dts/marvell/armada-385-turris-omnia.dts | 20 +++++----- arch/arm/boot/dts/marvell/armada-388-clearfog.dts | 20 +++++----- .../boot/dts/marvell/armada-xp-linksys-mamba.dts | 18 ++++----- 8 files changed, 96 insertions(+), 108 deletions(-) diff --git a/arch/arm/boot/dts/marvell/armada-370-rd.dts b/arch/arm/boot/dts/marvell/armada-370-rd.dts index b459a670f615..1b241da11e94 100644 --- a/arch/arm/boot/dts/marvell/armada-370-rd.dts +++ b/arch/arm/boot/dts/marvell/armada-370-rd.dts @@ -149,39 +149,37 @@ led@0 { }; }; - switch: switch@10 { + switch: ethernet-switch@10 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <0x10>; interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "lan0"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan3"; }; - port@5 { + ethernet-port@5 { reg = <5>; ethernet = <ð1>; phy-mode = "rgmii-id"; @@ -196,25 +194,25 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switchphy0: switchphy@0 { + switchphy0: ethernet-phy@0 { reg = <0>; interrupt-parent = <&switch>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; }; - switchphy1: switchphy@1 { + switchphy1: ethernet-phy@1 { reg = <1>; interrupt-parent = <&switch>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; - switchphy2: switchphy@2 { + switchphy2: ethernet-phy@2 { reg = <2>; interrupt-parent = <&switch>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; }; - switchphy3: switchphy@3 { + switchphy3: ethernet-phy@3 { reg = <3>; interrupt-parent = <&switch>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts index f4c4b213ef4e..5baf83e5253d 100644 --- a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts +++ b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts @@ -77,51 +77,49 @@ &mdio { pinctrl-0 = <&mdio_pins>; status = "okay"; - switch@0 { + ethernet-switch@0 { compatible = "marvell,mv88e6190"; - #address-cells = <1>; #interrupt-cells = <2>; interrupt-controller; interrupt-parent = <&gpio1>; interrupts = <7 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&switch_interrupt_pins>; pinctrl-names = "default"; - #size-cells = <0>; reg = <0>; mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy1: switch0phy1@1 { + switch0phy1: ethernet-phy@1 { reg = <0x1>; }; - switch0phy2: switch0phy2@2 { + switch0phy2: ethernet-phy@2 { reg = <0x2>; }; - switch0phy3: switch0phy3@3 { + switch0phy3: ethernet-phy@3 { reg = <0x3>; }; - switch0phy4: switch0phy4@4 { + switch0phy4: ethernet-phy@4 { reg = <0x4>; }; - switch0phy5: switch0phy5@5 { + switch0phy5: ethernet-phy@5 { reg = <0x5>; }; - switch0phy6: switch0phy6@6 { + switch0phy6: ethernet-phy@6 { reg = <0x6>; }; - switch0phy7: switch0phy7@7 { + switch0phy7: ethernet-phy@7 { reg = <0x7>; }; - switch0phy8: switch0phy8@8 { + switch0phy8: ethernet-phy@8 { reg = <0x8>; }; }; @@ -142,11 +140,11 @@ phy2: ethernet-phy@c { }; }; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { ethernet = <ð0>; phy-mode = "rgmii"; reg = <0>; @@ -158,55 +156,55 @@ fixed-link { }; }; - port@1 { + ethernet-port@1 { label = "lan1"; phy-handle = <&switch0phy1>; reg = <1>; }; - port@2 { + ethernet-port@2 { label = "lan2"; phy-handle = <&switch0phy2>; reg = <2>; }; - port@3 { + ethernet-port@3 { label = "lan3"; phy-handle = <&switch0phy3>; reg = <3>; }; - port@4 { + ethernet-port@4 { label = "lan4"; phy-handle = <&switch0phy4>; reg = <4>; }; - port@5 { + ethernet-port@5 { label = "lan5"; phy-handle = <&switch0phy5>; reg = <5>; }; - port@6 { + ethernet-port@6 { label = "lan6"; phy-handle = <&switch0phy6>; reg = <6>; }; - port@7 { + ethernet-port@7 { label = "lan7"; phy-handle = <&switch0phy7>; reg = <7>; }; - port@8 { + ethernet-port@8 { label = "lan8"; phy-handle = <&switch0phy8>; reg = <8>; }; - port@9 { + ethernet-port@9 { /* 88X3310P external phy */ label = "lan9"; phy-handle = <&phy1>; @@ -214,7 +212,7 @@ port@9 { reg = <9>; }; - port@a { + ethernet-port@a { /* 88X3310P external phy */ label = "lan10"; phy-handle = <&phy2>; diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts index 1990f7d0cc79..1707d1b01545 100644 --- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts +++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts @@ -7,66 +7,66 @@ / { }; &mdio { - switch0: switch0@4 { + switch0: ethernet-switch@4 { compatible = "marvell,mv88e6190"; reg = <4>; pinctrl-names = "default"; pinctrl-0 = <&cf_gtr_switch_reset_pins>; reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan8"; phy-handle = <&switch0phy0>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan7"; phy-handle = <&switch0phy1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan6"; phy-handle = <&switch0phy2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "lan5"; phy-handle = <&switch0phy3>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "lan4"; phy-handle = <&switch0phy4>; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "lan3"; phy-handle = <&switch0phy5>; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "lan2"; phy-handle = <&switch0phy6>; }; - port@8 { + ethernet-port@8 { reg = <8>; label = "lan1"; phy-handle = <&switch0phy7>; }; - port@10 { + ethernet-port@10 { reg = <10>; phy-mode = "2500base-x"; @@ -83,35 +83,35 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@1 { + switch0phy0: ethernet-phy@1 { reg = <0x1>; }; - switch0phy1: switch0phy1@2 { + switch0phy1: ethernet-phy@2 { reg = <0x2>; }; - switch0phy2: switch0phy2@3 { + switch0phy2: ethernet-phy@3 { reg = <0x3>; }; - switch0phy3: switch0phy3@4 { + switch0phy3: ethernet-phy@4 { reg = <0x4>; }; - switch0phy4: switch0phy4@5 { + switch0phy4: ethernet-phy@5 { reg = <0x5>; }; - switch0phy5: switch0phy5@6 { + switch0phy5: ethernet-phy@6 { reg = <0x6>; }; - switch0phy6: switch0phy6@7 { + switch0phy6: ethernet-phy@7 { reg = <0x7>; }; - switch0phy7: switch0phy7@8 { + switch0phy7: ethernet-phy@8 { reg = <0x8>; }; }; diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts index b795ad573891..a7678a784c18 100644 --- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts +++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts @@ -11,42 +11,42 @@ &sfp0 { }; &mdio { - switch0: switch0@4 { + switch0: ethernet-switch@4 { compatible = "marvell,mv88e6085"; reg = <4>; pinctrl-names = "default"; pinctrl-0 = <&cf_gtr_switch_reset_pins>; reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan2"; phy-handle = <&switch0phy0>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&switch0phy1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan4"; phy-handle = <&switch0phy2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&switch0phy3>; }; - port@5 { + ethernet-port@5 { reg = <5>; phy-mode = "2500base-x"; ethernet = <ð1>; @@ -63,19 +63,19 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; - switch0phy3: switch0phy3@14 { + switch0phy3: ethernet-phy@14 { reg = <0x14>; }; }; diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi index fc8216fd9f60..4116ed60f709 100644 --- a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi @@ -158,42 +158,40 @@ nand: nand@0 { &mdio { status = "okay"; - switch@0 { + ethernet-switch@0 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "lan4"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan3"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan1"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "wan"; }; - port@5 { + ethernet-port@5 { reg = <5>; phy-mode = "sgmii"; ethernet = <ð2>; diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts index 2d8d319bec83..7b755bb4e4e7 100644 --- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts @@ -435,12 +435,10 @@ phy1: ethernet-phy@1 { }; /* Switch MV88E6176 at address 0x10 */ - switch@10 { + ethernet-switch@10 { pinctrl-names = "default"; pinctrl-0 = <&swint_pins>; compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; dsa,member = <0 0>; reg = <0x10>; @@ -448,36 +446,36 @@ switch@10 { interrupt-parent = <&gpio1>; interrupts = <13 IRQ_TYPE_LEVEL_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - ports@0 { + ethernet-port@0 { reg = <0>; label = "lan0"; }; - ports@1 { + ethernet-port@1 { reg = <1>; label = "lan1"; }; - ports@2 { + ethernet-port@2 { reg = <2>; label = "lan2"; }; - ports@3 { + ethernet-port@3 { reg = <3>; label = "lan3"; }; - ports@4 { + ethernet-port@4 { reg = <4>; label = "lan4"; }; - ports@5 { + ethernet-port@5 { reg = <5>; ethernet = <ð1>; phy-mode = "rgmii-id"; @@ -488,7 +486,7 @@ fixed-link { }; }; - ports@6 { + ethernet-port@6 { reg = <6>; ethernet = <ð0>; phy-mode = "rgmii-id"; diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts index 32c569df142f..3290ccad2374 100644 --- a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts @@ -92,44 +92,42 @@ pcie2-0-w-disable-hog { &mdio { status = "okay"; - switch@4 { + ethernet-switch@4 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <4>; pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>; pinctrl-names = "default"; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "lan5"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan4"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan3"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan2"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "lan1"; }; - port@5 { + ethernet-port@5 { reg = <5>; ethernet = <ð1>; phy-mode = "1000base-x"; @@ -140,7 +138,7 @@ fixed-link { }; }; - port@6 { + ethernet-port@6 { /* 88E1512 external phy */ reg = <6>; label = "lan6"; diff --git a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts index 7a0614fd0c93..ea859f7ea042 100644 --- a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts @@ -265,42 +265,40 @@ flash@0 { &mdio { status = "okay"; - switch@0 { + ethernet-switch@0 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "lan4"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan3"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan1"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "internet"; }; - port@5 { + ethernet-port@5 { reg = <5>; phy-mode = "rgmii-id"; ethernet = <ð0>;