From patchwork Mon Oct 16 21:51:23 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Laurent Pinchart X-Patchwork-Id: 734115 Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 29E5537CBC for ; Mon, 16 Oct 2023 21:51:26 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=ideasonboard.com header.i=@ideasonboard.com header.b="DEHS7Aoz" Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [213.167.242.64]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D91EAA2 for ; Mon, 16 Oct 2023 14:51:23 -0700 (PDT) Received: from pendragon.ideasonboard.com (213-243-189-158.bb.dnainternet.fi [213.243.189.158]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 4A1081225; Mon, 16 Oct 2023 23:51:15 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1697493075; bh=eCXOgDDIN3HW+GS4jg+CcSNaMRqdaosojFrcUTLDESU=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=DEHS7AozKrSWDiuO5F4t4IBrfbL0gi8R6prKkedGKgjwIvV2zegBlmjk7KRjIK8Iv DxPOIjUnslJVNrygJ/LXwXZ6jsw1Fp8kpgL+jsGQlZvzpv5peEQy5zN+URNJgnlIGY Hw0a3PGmZEXxXy8i/029TXfC8R0b3IlgCkoeX0hI= From: Laurent Pinchart To: linux-mediatek@lists.infradead.org Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Rob Herring , Krzysztof Kozlowski , Conor Dooley , Matthias Brugger , AngeloGioacchino Del Regno , Paul Elder , Fabien Parent , Alexandre Mergnat , Julien Stephan , Suhrid Subramaniam , Ted Larson Subject: [PATCH v1 3/3] arm64: dts: mediatek: Add device tree for MT8365-based Pumpkin i350 Date: Tue, 17 Oct 2023 00:51:23 +0300 Message-ID: <20231016215123.30343-4-laurent.pinchart@ideasonboard.com> X-Mailer: git-send-email 2.41.0 In-Reply-To: <20231016215123.30343-1-laurent.pinchart@ideasonboard.com> References: <20231016215123.30343-1-laurent.pinchart@ideasonboard.com> Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, SPF_HELO_PASS,SPF_PASS autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Add a minimal device tree for the Genio i350 Pumpkin development board, which is based on a MediaTek MT8365. The device tree is based on an initial version by Fabien Parent Based written against the MediaTek BSP kernel ([1]). It has been cleaned up, some features have been added (GPIO LEDs, ethernet), and some features removed (audio, camera, display and dual-role USB). Those features will be added back once the corresponding DT bindings and/or drivers become available in the upstream kernel. [1] https://gitlab.com/mediatek/aiot/bsp/linux/-/blob/mtk-v5.15-dev/arch/arm64/boot/dts/mediatek/mt8365-pumpkin.dts Co-developed-by: Fabien Parent Signed-off-by: Fabien Parent Co-developed-by: Paul Elder Signed-off-by: Paul Elder Signed-off-by: Laurent Pinchart --- Changes compared to the BSP version: - Add ethernet controller - Add GPIO LEDs - Add reserved memory region for BL31 - Update board model and compatible - Rename enable-sdio-wakeup to wakeup-source - Drop audio support - Drop display support - Drop dual role USB support - Don't use underscores in node names - Normalize pinmux node names - Remove unneeded labels - Drop unneeded always-on - Drop unused pinmux nodes - Drop camera GPIO hog - Update copyright - Fix formatting - Sort alphabetically --- arch/arm64/boot/dts/mediatek/Makefile | 1 + .../boot/dts/mediatek/mt8365-pumpkin.dts | 542 ++++++++++++++++++ 2 files changed, 543 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-pumpkin.dts diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index c99c3372a4b5..bbc232bdadc4 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -53,4 +53,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-pumpkin.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt8365-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8365-pumpkin.dts new file mode 100644 index 000000000000..88fa5d19c627 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8365-pumpkin.dts @@ -0,0 +1,542 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021 BayLibre, SAS. + * Copyright (c) 2023 Ideas on Board Oy + * + * Author: Fabien Parent + */ + +/dts-v1/; + +#include +#include +#include +#include + +#include "mt8365.dtsi" +#include "mt6357.dtsi" + +/ { + model = "OLogic Pumpkin i350 EVK"; + compatible = "ologic,pumpkin-i350", "mediatek,mt8365"; + + aliases { + ethernet0 = ðernet_usb; + mmc0 = &mmc0; + mmc1 = &mmc1; + mmc2 = &mmc2; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-red { + gpios = <&gpio_exp 12 GPIO_ACTIVE_HIGH>; + color = ; + function = LED_FUNCTION_HEARTBEAT; + linux,default-trigger = "heartbeat"; + }; + + led-green { + gpios = <&gpio_exp 13 GPIO_ACTIVE_HIGH>; + color = ; + default-state = "off"; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 192 KiB reserved for ARM Trusted Firmware (BL31) */ + secmon@43000000 { + no-map; + reg = <0 0x43000000 0 0x30000>; + }; + + /* + * 12 MiB reserved for OP-TEE (BL32) + * +-----------------------+ 0x43e0_0000 + * | SHMEM 2MiB | + * +-----------------------+ 0x43c0_0000 + * | | TA_RAM 8MiB | + * + TZDRAM +--------------+ 0x4340_0000 + * | | TEE_RAM 2MiB | + * +-----------------------+ 0x4320_0000 + */ + optee@43200000 { + no-map; + reg = <0 0x43200000 0 0x00c00000>; + }; + }; + + usb_otg_vbus: usb-otg-vbus-regulator { + compatible = "regulator-fixed"; + regulator-name = "otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&cpu0 { + proc-supply = <&mt6357_vproc_reg>; + sram-supply = <&mt6357_vsram_proc_reg>; +}; + +&cpu1 { + proc-supply = <&mt6357_vproc_reg>; + sram-supply = <&mt6357_vsram_proc_reg>; +}; + +&cpu2 { + proc-supply = <&mt6357_vproc_reg>; + sram-supply = <&mt6357_vsram_proc_reg>; +}; + +&cpu3 { + proc-supply = <&mt6357_vproc_reg>; + sram-supply = <&mt6357_vsram_proc_reg>; +}; + +&i2c0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + clock-frequency = <100000>; +}; + +&i2c1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <100000>; + + gpio_exp: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + reset-gpios = <&pio 78 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&tca6416_pins>; + + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <100000>; +}; + +&i2c3 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + clock-frequency = <100000>; +}; + +&keypad { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&keypad_pins>; + + keypad,num-rows = <2>; + keypad,num-columns = <1>; + mediatek,debounce-us = <32000>; + mediatek,double-keys; + + linux,keymap = ; +}; + +/* eMMC */ +&mmc0 { + status = "okay"; + + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>; + + bus-width = <8>; + max-frequency = <200000000>; + + vmmc-supply = <&mt6357_vemc_reg>; + vqmmc-supply = <&mt6357_vio18_reg>; + + cap-mmc-highspeed; + cap-mmc-hw-reset; + hs400-ds-delay = <0x12012>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + no-sd; + no-sdio; + non-removable; +}; + +/* SD card connector */ +&mmc1 { + status = "okay"; + + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_uhs>; + + bus-width = <4>; + max-frequency = <200000000>; + + vmmc-supply = <&mt6357_vmch_reg>; + vqmmc-supply = <&mt6357_vmc_reg>; + + cap-sd-highspeed; + cd-gpios = <&pio 76 GPIO_ACTIVE_LOW>; + sd-uhs-sdr104; + sd-uhs-sdr50; +}; + +/* WiFi module */ +&mmc2 { + status = "okay"; + + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_uhs>; + + assigned-clocks = <&topckgen CLK_TOP_MSDC50_2_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>; + + bus-width = <4>; + max-frequency = <200000000>; + + vmmc-supply = <&mt6357_vemc_reg>; + vqmmc-supply = <&mt6357_vio18_reg>; + + cap-sd-highspeed; + cap-sdio-irq; + wakeup-source; + hs400-ds-delay = <0x12012>; + keep-power-in-suspend; + non-removable; + sd-uhs-sdr104; + sd-uhs-sdr25; + sd-uhs-sdr50; +}; + +&mt6357_pmic { + interrupt-parent = <&pio>; + interrupts = <145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; +}; + +&pio { + i2c0_pins: i2c0-pins { + pins { + pinmux = , + ; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + bias-pull-up; + }; + }; + + + i2c1_pins: i2c1-pins { + pins { + pinmux = , + ; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + bias-pull-up; + }; + }; + + i2c2_pins: i2c2-pins { + pins { + pinmux = , + ; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + bias-pull-up; + }; + }; + + i2c3_pins: i2c3-pins { + pins { + pinmux = , + ; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + bias-pull-up; + }; + }; + + keypad_pins: keypad-pins { + pins { + pinmux = , + , + ; + }; + }; + + mmc0_pins_default: mmc0-default-pins { + clk-pins { + pinmux = ; + bias-pull-down; + }; + + cmd-dat-pins { + pinmux = , + , + , + , + , + , + , + , + ; + input-enable; + bias-pull-up; + }; + + rst-pins { + pinmux = ; + bias-pull-up; + }; + }; + + mmc0_pins_uhs: mmc0-uhs-pins{ + clk-pins { + pinmux = ; + drive-strength = ; + bias-pull-down = ; + }; + + cmd-dat-pins { + pinmux = , + , + , + , + , + , + , + , + ; + input-enable; + drive-strength = ; + bias-pull-up = ; + }; + + ds-pins { + pinmux = ; + drive-strength = ; + bias-pull-down = ; + }; + + rst-pins { + pinmux = ; + drive-strength = ; + bias-pull-up; + }; + }; + + mmc1_pins_default: mmc1-default-pins { + cd-pins { + pinmux = ; + bias-pull-up; + }; + + clk-pins { + pinmux = ; + bias-pull-down = ; + }; + + cmd-dat-pins { + pinmux = , + , + , + , + ; + input-enable; + bias-pull-up = ; + }; + }; + + mmc1_pins_uhs: mmc1-uhs-pins { + cd-pins { + pinmux = ; + bias-pull-up; + }; + + clk-pins { + pinmux = ; + drive-strength = ; + bias-pull-down = ; + }; + + cmd-dat-pins { + pinmux = , + , + , + , + ; + input-enable; + drive-strength = ; + bias-pull-up = ; + }; + }; + + mmc2_pins_default: mmc2-default-pins { + clk-pins { + pinmux = ; + drive-strength = ; + bias-pull-down = ; + }; + + cmd-dat-pins { + pinmux = , + , + , + , + ; + input-enable; + drive-strength = ; + bias-pull-up = ; + }; + + sysrstb-en-pins { + pinmux = ; + output-low; + }; + }; + + mmc2_pins_uhs: mmc2-uhs-pins { + clk-pins { + pinmux = ; + drive-strength = ; + bias-pull-down = ; + }; + + cmd-dat-pins { + pinmux = , + , + , + , + ; + input-enable; + drive-strength = ; + bias-pull-up = ; + }; + + ds-pins { + pinmux = ; + drive-strength = ; + bias-pull-down = ; + }; + + sysrstb-en-pins { + pinmux = ; + output-high; + }; + }; + + tca6416_pins: tca6416-pins { + rst-n-pins { + pinmux = ; + output-high; + }; + + int-n-pins { + pinmux = ; + input-enable; + bias-pull-up; + }; + }; + + usb_pins: usb-pins { + hub-rst-pins { + pinmux = ; + output-low; + }; + + id-pins { + pinmux = ; + input-enable; + bias-pull-up; + }; + + vbus-pins { + pinmux = ; + }; + }; +}; + +&ssusb { + status = "okay"; + + pinctrl-0 = <&usb_pins>; + pinctrl-names = "default"; + + /* Host mode only for now, TUSB322 support is missing. */ + dr_mode = "host"; + maximum-speed = "high-speed"; + vusb33-supply = <&mt6357_vusb33_reg>; +}; + +&uart0 { + status = "okay"; +}; + +&usb_host { + status = "okay"; + + vusb33-supply = <&mt6357_vusb33_reg>; + + #address-cells = <1>; + #size-cells = <0>; + + hub@2 { + reg = <2>; + + #address-cells = <1>; + #size-cells = <0>; + + ethernet_usb: ethernet@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; +};