diff mbox series

[v4,1/2] arm64: dts: ti: k3-j7200-mcu-wakeup: Switch mcu_syscon to ti,j721e-system-controller

Message ID 20231009082452.30684-2-vaishnav.a@ti.com
State New
Headers show
Series arm64: dts: ti: k3-j7200: Fixes for various dtbs_checks warnings | expand

Commit Message

Vaishnav Achath Oct. 9, 2023, 8:24 a.m. UTC 
From: Nishanth Menon <nm@ti.com>

Use ti,j721e-system-controller to be explicit about the syscon node we
are using.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
---

No changes since V1.

 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

reidt Oct. 19, 2023, 7:13 p.m. UTC | #1 
On 13:54-20231009, Vaishnav Achath wrote:
> From: Nishanth Menon <nm@ti.com>
> 
> Use ti,j721e-system-controller to be explicit about the syscon node we
> are using.
> 
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
> ---
> 
> No changes since V1.
> 
>  arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> index 6ffaf85fa63f..2ee6215e38a6 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> @@ -165,7 +165,7 @@
>  	};
>  
>  	mcu_conf: syscon@40f00000 {
> -		compatible = "syscon", "simple-mfd";
> +		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
>  		reg = <0x00 0x40f00000 0x00 0x20000>;
>  		#address-cells = <1>;
>  		#size-cells = <1>;
> -- 
> 2.17.1
> 
>

Reviewed-by: Reid tonking <reidt@ti.com>
Andrew Davis Oct. 19, 2023, 9:05 p.m. UTC | #2 
On 10/9/23 3:24 AM, Vaishnav Achath wrote:
> From: Nishanth Menon <nm@ti.com>
> 
> Use ti,j721e-system-controller to be explicit about the syscon node we
> are using.
> 
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
> ---
> 
> No changes since V1.
> 
>   arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> index 6ffaf85fa63f..2ee6215e38a6 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> @@ -165,7 +165,7 @@
>   	};
>   
>   	mcu_conf: syscon@40f00000 {
> -		compatible = "syscon", "simple-mfd";
> +		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";

There is already a "ti,j721e-system-controller" in the main domain dtsi. And this
is not one of those. You are hiding a valid DT warning by adding an incorrect
compatible string that just so happens to not throw the warning.

This should be a "simple-bus" node.

Andrew

>   		reg = <0x00 0x40f00000 0x00 0x20000>;
>   		#address-cells = <1>;
>   		#size-cells = <1>;
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 6ffaf85fa63f..2ee6215e38a6 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -165,7 +165,7 @@ 
 	};
 
 	mcu_conf: syscon@40f00000 {
-		compatible = "syscon", "simple-mfd";
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
 		reg = <0x00 0x40f00000 0x00 0x20000>;
 		#address-cells = <1>;
 		#size-cells = <1>;