diff mbox series

[V2,3/3] arm64: dts: rockchip: Add saradc node to Indiedroid Nova

Message ID 20230918173255.1325-4-macroalpha82@gmail.com
State New
Headers show
Series [V2,1/3] arm64: dts: rockchip: add PCIe to rk3588s-indiedroid-nova | expand

Commit Message

Chris Morgan Sept. 18, 2023, 5:32 p.m. UTC 
From: Chris Morgan <macromorgan@hotmail.com>

Add ADC support for the Indiedroid Nova, as well as the two ADC buttons
found on the device. The buttons are documented as "boot" and
"recovery". The boot button is used by the bootloader to boot into USB
recovery mode. The recovery button use is currently unknown.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 .../dts/rockchip/rk3588s-indiedroid-nova.dts  | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
index 1e2336d3065b..60f00ceb630e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
@@ -3,6 +3,7 @@ 
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/usb/pd.h>
 #include "rk3588s.dtsi"
@@ -11,6 +12,34 @@  / {
 	model = "Indiedroid Nova";
 	compatible = "indiedroid,nova", "rockchip,rk3588s";
 
+	adc-keys-0 {
+		compatible = "adc-keys";
+		io-channel-names = "buttons";
+		io-channels = <&saradc 0>;
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-boot {
+			label = "boot";
+			linux,code = <KEY_PROG1>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	adc-keys-1 {
+		compatible = "adc-keys";
+		io-channel-names = "buttons";
+		io-channels = <&saradc 1>;
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "recovery";
+			linux,code = <KEY_PROG2>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
 	aliases {
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
@@ -410,6 +439,11 @@  typec5v_pwren: typec5v-pwren {
 	};
 };
 
+&saradc {
+	vref-supply = <&vcca_1v8_s0>;
+	status = "okay";
+};
+
 /* HS400 modes seemed to cause io errors. */
 &sdhci {
 	bus-width = <8>;