| Message ID | 20230907091058.125630-12-minda.chen@starfivetech.com |
|---|---|
| State | New |
| Headers | show |
| Series | Refactoring Microchip PCIe driver and add StarFive PCIe | expand |
On Thu, Sep 7, 2023 at 4:11 AM Minda Chen <minda.chen@starfivetech.com> wrote: > > Add PCIe dts configuraion for JH7110 SoC platform. > > Signed-off-by: Minda Chen <minda.chen@starfivetech.com> > Reviewed-by: Hal Feng <hal.feng@starfivetech.com> > --- > .../jh7110-starfive-visionfive-2.dtsi | 64 ++++++++++++++ > arch/riscv/boot/dts/starfive/jh7110.dtsi | 86 +++++++++++++++++++ > 2 files changed, 150 insertions(+) > > diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi > index de0f40a8be93..4dd61e2fec7d 100644 > --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi > +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi > @@ -15,6 +15,8 @@ > i2c2 = &i2c2; > i2c5 = &i2c5; > i2c6 = &i2c6; > + pcie0 = &pcie0; > + pcie1 = &pcie1; That's not a defined alias. We already have "linux,pci-domain" if you need to number PCI host bridges. > serial0 = &uart0; > }; > > @@ -208,6 +210,54 @@ > }; > }; > > + pcie0_pins: pcie0-0 { > + wake-pins { > + pinmux = <GPIOMUX(32, GPOUT_LOW, > + GPOEN_DISABLE, > + GPI_NONE)>; > + bias-pull-up; > + drive-strength = <2>; > + input-enable; > + input-schmitt-disable; > + slew-rate = <0>; > + }; > + > + clkreq-pins { > + pinmux = <GPIOMUX(27, GPOUT_LOW, > + GPOEN_DISABLE, > + GPI_NONE)>; > + bias-pull-down; > + drive-strength = <2>; > + input-enable; > + input-schmitt-disable; > + slew-rate = <0>; > + }; > + }; > + > + pcie1_pins: pcie1-0 { > + wake-pins { > + pinmux = <GPIOMUX(21, GPOUT_LOW, > + GPOEN_DISABLE, > + GPI_NONE)>; > + bias-pull-up; > + drive-strength = <2>; > + input-enable; > + input-schmitt-disable; > + slew-rate = <0>; > + }; > + > + clkreq-pins { > + pinmux = <GPIOMUX(29, GPOUT_LOW, > + GPOEN_DISABLE, > + GPI_NONE)>; > + bias-pull-down; > + drive-strength = <2>; > + input-enable; > + input-schmitt-disable; > + slew-rate = <0>; > + }; > + }; > + > uart0_pins: uart0-0 { > tx-pins { > pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, > @@ -233,6 +283,20 @@ > }; > }; > > +&pcie0 { > + pinctrl-names = "default"; > + perst-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>; > + pinctrl-0 = <&pcie0_pins>; > + status = "okay"; > +}; > + > +&pcie1 { > + pinctrl-names = "default"; > + perst-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>; > + pinctrl-0 = <&pcie1_pins>; > + status = "okay"; > +}; > + > &uart0 { > pinctrl-names = "default"; > pinctrl-0 = <&uart0_pins>; > diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi > index 02354e642c44..7a5dc43cf63c 100644 > --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi > +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi > @@ -629,5 +629,91 @@ > #reset-cells = <1>; > power-domains = <&pwrc JH7110_PD_VOUT>; > }; > + > + pcie0: pcie@940000000 { > + compatible = "starfive,jh7110-pcie"; > + reg = <0x9 0x40000000 0x0 0x1000000>, > + <0x0 0x2b000000 0x0 0x100000>; > + reg-names = "cfg", "apb"; > + #address-cells = <3>; > + #size-cells = <2>; > + #interrupt-cells = <1>; > + ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000 0x0 0x08000000>, > + <0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0 0x40000000>; > + interrupts = <56>; > + interrupt-parent = <&plic>; > + interrupt-map-mask = <0x0 0x0 0x0 0x7>; > + interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>, > + <0x0 0x0 0x0 0x2 &pcie_intc0 0x2>, > + <0x0 0x0 0x0 0x3 &pcie_intc0 0x3>, > + <0x0 0x0 0x0 0x4 &pcie_intc0 0x4>; > + msi-controller; > + device_type = "pci"; > + starfive,stg-syscon = <&stg_syscon>; > + bus-range = <0x0 0xff>; > + clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>, > + <&stgcrg JH7110_STGCLK_PCIE0_TL>, > + <&stgcrg JH7110_STGCLK_PCIE0_AXI_MST0>, > + <&stgcrg JH7110_STGCLK_PCIE0_APB>; > + clock-names = "noc", "tl", "axi_mst0", "apb"; > + resets = <&stgcrg JH7110_STGRST_PCIE0_AXI_MST0>, > + <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV0>, > + <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV>, > + <&stgcrg JH7110_STGRST_PCIE0_BRG>, > + <&stgcrg JH7110_STGRST_PCIE0_CORE>, > + <&stgcrg JH7110_STGRST_PCIE0_APB>; > + reset-names = "mst0", "slv0", "slv", "brg", > + "core", "apb"; > + status = "disabled"; > + > + pcie_intc0: interrupt-controller { > + #address-cells = <0>; > + #interrupt-cells = <1>; > + interrupt-controller; > + }; > + }; > + > + pcie1: pcie@9c0000000 { > + compatible = "starfive,jh7110-pcie"; > + reg = <0x9 0xc0000000 0x0 0x1000000>, > + <0x0 0x2c000000 0x0 0x100000>; > + reg-names = "cfg", "apb"; > + #address-cells = <3>; > + #size-cells = <2>; > + #interrupt-cells = <1>; > + ranges = <0x82000000 0x0 0x38000000 0x0 0x38000000 0x0 0x08000000>, > + <0xc3000000 0x9 0x80000000 0x9 0x80000000 0x0 0x40000000>; > + interrupts = <57>; > + interrupt-parent = <&plic>; > + interrupt-map-mask = <0x0 0x0 0x0 0x7>; > + interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc1 0x1>, > + <0x0 0x0 0x0 0x2 &pcie_intc1 0x2>, > + <0x0 0x0 0x0 0x3 &pcie_intc1 0x3>, > + <0x0 0x0 0x0 0x4 &pcie_intc1 0x4>; > + msi-controller; > + device_type = "pci"; > + starfive,stg-syscon = <&stg_syscon>; > + bus-range = <0x0 0xff>; > + clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>, > + <&stgcrg JH7110_STGCLK_PCIE1_TL>, > + <&stgcrg JH7110_STGCLK_PCIE1_AXI_MST0>, > + <&stgcrg JH7110_STGCLK_PCIE1_APB>; > + clock-names = "noc", "tl", "axi_mst0", "apb"; > + resets = <&stgcrg JH7110_STGRST_PCIE1_AXI_MST0>, > + <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV0>, > + <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV>, > + <&stgcrg JH7110_STGRST_PCIE1_BRG>, > + <&stgcrg JH7110_STGRST_PCIE1_CORE>, > + <&stgcrg JH7110_STGRST_PCIE1_APB>; > + reset-names = "mst0", "slv0", "slv", "brg", > + "core", "apb"; > + status = "disabled"; > + > + pcie_intc1: interrupt-controller { > + #address-cells = <0>; > + #interrupt-cells = <1>; > + interrupt-controller; > + }; > + }; > }; > }; > -- > 2.17.1 >
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index de0f40a8be93..4dd61e2fec7d 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -15,6 +15,8 @@ i2c2 = &i2c2; i2c5 = &i2c5; i2c6 = &i2c6; + pcie0 = &pcie0; + pcie1 = &pcie1; serial0 = &uart0; }; @@ -208,6 +210,54 @@ }; }; + pcie0_pins: pcie0-0 { + wake-pins { + pinmux = <GPIOMUX(32, GPOUT_LOW, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + + clkreq-pins { + pinmux = <GPIOMUX(27, GPOUT_LOW, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-down; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + + pcie1_pins: pcie1-0 { + wake-pins { + pinmux = <GPIOMUX(21, GPOUT_LOW, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + + clkreq-pins { + pinmux = <GPIOMUX(29, GPOUT_LOW, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-down; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + uart0_pins: uart0-0 { tx-pins { pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, @@ -233,6 +283,20 @@ }; }; +&pcie0 { + pinctrl-names = "default"; + perst-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie0_pins>; + status = "okay"; +}; + +&pcie1 { + pinctrl-names = "default"; + perst-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie1_pins>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins>; diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index 02354e642c44..7a5dc43cf63c 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -629,5 +629,91 @@ #reset-cells = <1>; power-domains = <&pwrc JH7110_PD_VOUT>; }; + + pcie0: pcie@940000000 { + compatible = "starfive,jh7110-pcie"; + reg = <0x9 0x40000000 0x0 0x1000000>, + <0x0 0x2b000000 0x0 0x100000>; + reg-names = "cfg", "apb"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000 0x0 0x08000000>, + <0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0 0x40000000>; + interrupts = <56>; + interrupt-parent = <&plic>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>, + <0x0 0x0 0x0 0x2 &pcie_intc0 0x2>, + <0x0 0x0 0x0 0x3 &pcie_intc0 0x3>, + <0x0 0x0 0x0 0x4 &pcie_intc0 0x4>; + msi-controller; + device_type = "pci"; + starfive,stg-syscon = <&stg_syscon>; + bus-range = <0x0 0xff>; + clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>, + <&stgcrg JH7110_STGCLK_PCIE0_TL>, + <&stgcrg JH7110_STGCLK_PCIE0_AXI_MST0>, + <&stgcrg JH7110_STGCLK_PCIE0_APB>; + clock-names = "noc", "tl", "axi_mst0", "apb"; + resets = <&stgcrg JH7110_STGRST_PCIE0_AXI_MST0>, + <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV0>, + <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV>, + <&stgcrg JH7110_STGRST_PCIE0_BRG>, + <&stgcrg JH7110_STGRST_PCIE0_CORE>, + <&stgcrg JH7110_STGRST_PCIE0_APB>; + reset-names = "mst0", "slv0", "slv", "brg", + "core", "apb"; + status = "disabled"; + + pcie_intc0: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + + pcie1: pcie@9c0000000 { + compatible = "starfive,jh7110-pcie"; + reg = <0x9 0xc0000000 0x0 0x1000000>, + <0x0 0x2c000000 0x0 0x100000>; + reg-names = "cfg", "apb"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0x0 0x38000000 0x0 0x38000000 0x0 0x08000000>, + <0xc3000000 0x9 0x80000000 0x9 0x80000000 0x0 0x40000000>; + interrupts = <57>; + interrupt-parent = <&plic>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc1 0x1>, + <0x0 0x0 0x0 0x2 &pcie_intc1 0x2>, + <0x0 0x0 0x0 0x3 &pcie_intc1 0x3>, + <0x0 0x0 0x0 0x4 &pcie_intc1 0x4>; + msi-controller; + device_type = "pci"; + starfive,stg-syscon = <&stg_syscon>; + bus-range = <0x0 0xff>; + clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>, + <&stgcrg JH7110_STGCLK_PCIE1_TL>, + <&stgcrg JH7110_STGCLK_PCIE1_AXI_MST0>, + <&stgcrg JH7110_STGCLK_PCIE1_APB>; + clock-names = "noc", "tl", "axi_mst0", "apb"; + resets = <&stgcrg JH7110_STGRST_PCIE1_AXI_MST0>, + <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV0>, + <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV>, + <&stgcrg JH7110_STGRST_PCIE1_BRG>, + <&stgcrg JH7110_STGRST_PCIE1_CORE>, + <&stgcrg JH7110_STGRST_PCIE1_APB>; + reset-names = "mst0", "slv0", "slv", "brg", + "core", "apb"; + status = "disabled"; + + pcie_intc1: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; }; };