@@ -9,6 +9,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/clk-provider.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/reset-controller.h>
@@ -3384,14 +3385,26 @@ static int gcc_sm6115_probe(struct platform_device *pdev)
struct regmap *regmap;
int ret;
+ ret = devm_pm_runtime_enable(&pdev->dev);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_resume_and_get(&pdev->dev);
+ if (ret)
+ return ret;
+
regmap = qcom_cc_map(pdev, &gcc_sm6115_desc);
- if (IS_ERR(regmap))
+ if (IS_ERR(regmap)) {
+ pm_runtime_put(&pdev->dev);
return PTR_ERR(regmap);
+ }
ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
ARRAY_SIZE(gcc_dfs_clocks));
- if (ret)
+ if (ret) {
+ pm_runtime_put(&pdev->dev);
return ret;
+ }
clk_alpha_pll_configure(&gpll8, regmap, &gpll8_config);
clk_alpha_pll_configure(&gpll9, regmap, &gpll9_config);
@@ -3406,7 +3419,10 @@ static int gcc_sm6115_probe(struct platform_device *pdev)
qcom_branch_set_clk_en(regmap, 0x36004); /* GCC_GPU_CFG_AHB_CLK */
qcom_branch_set_clk_en(regmap, 0x2b06c); /* GCC_SYS_NOC_CPUSS_AHB_CLK */
- return qcom_cc_really_probe(pdev, &gcc_sm6115_desc, regmap);
+ ret = qcom_cc_really_probe(pdev, &gcc_sm6115_desc, regmap);
+ pm_runtime_put(&pdev->dev);
+
+ return ret;
}
static struct platform_driver gcc_sm6115_driver = {
The GCC block on SM6115 is powered by the VDD_CX rail. We need to ensure that CX is enabled to prevent unwanted power collapse and that the reference is dropped when unused so that the system can enter a firmware-managed lower power state. Enable runtime PM to keep the power flowing only when necessary. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- drivers/clk/qcom/gcc-sm6115.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-)