diff mbox series

[v2,2/7] tty: serial: meson: redesign the module to platform_driver

Message ID 20230705181833.16137-3-ddrokosov@sberdevices.ru
State Superseded
Headers show
Series tty: serial: meson: support ttyS devname | expand

Commit Message

Dmitry Rokosov July 5, 2023, 6:18 p.m. UTC
Actually, the meson_uart module is already a platform_driver, but it is
currently registered manually and the uart core registration is run
outside the probe() scope, which results in some restrictions. For
instance, it is not possible to communicate with the OF subsystem
because it requires an initialized device object.

To address this issue, apply module_platform_driver() instead of direct
module init/exit routines. Additionally, move uart_register_driver() to
the driver probe(), and destroy manual console registration because it's
already run in the uart_register_driver() flow.

Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
---
 drivers/tty/serial/meson_uart.c | 51 ++++++++++-----------------------
 1 file changed, 15 insertions(+), 36 deletions(-)

Comments

Neil Armstrong July 6, 2023, 6:59 a.m. UTC | #1
On 05/07/2023 20:18, Dmitry Rokosov wrote:
> Actually, the meson_uart module is already a platform_driver, but it is
> currently registered manually and the uart core registration is run
> outside the probe() scope, which results in some restrictions. For
> instance, it is not possible to communicate with the OF subsystem
> because it requires an initialized device object.
> 
> To address this issue, apply module_platform_driver() instead of direct
> module init/exit routines. Additionally, move uart_register_driver() to
> the driver probe(), and destroy manual console registration because it's
> already run in the uart_register_driver() flow.
> 
> Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
> ---
>   drivers/tty/serial/meson_uart.c | 51 ++++++++++-----------------------
>   1 file changed, 15 insertions(+), 36 deletions(-)
> 
> diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
> index bca54f3d92a1..dcf994a11a21 100644
> --- a/drivers/tty/serial/meson_uart.c
> +++ b/drivers/tty/serial/meson_uart.c
> @@ -621,12 +621,6 @@ static struct console meson_serial_console = {
>   	.data		= &meson_uart_driver,
>   };
>   
> -static int __init meson_serial_console_init(void)
> -{
> -	register_console(&meson_serial_console);
> -	return 0;
> -}
> -
>   static void meson_serial_early_console_write(struct console *co,
>   					     const char *s,
>   					     u_int count)
> @@ -652,9 +646,6 @@ OF_EARLYCON_DECLARE(meson, "amlogic,meson-ao-uart",
>   
>   #define MESON_SERIAL_CONSOLE	(&meson_serial_console)
>   #else
> -static int __init meson_serial_console_init(void) {
> -	return 0;
> -}
>   #define MESON_SERIAL_CONSOLE	NULL
>   #endif
>   
> @@ -738,6 +729,13 @@ static int meson_uart_probe(struct platform_device *pdev)
>   	if (ret)
>   		return ret;
>   
> +	if (!meson_uart_driver.state) {
> +		ret = uart_register_driver(&meson_uart_driver);
> +		if (ret)
> +			return dev_err_probe(&pdev->dev, ret,
> +					     "can't register uart driver\n");
> +	}
> +
>   	port->iotype = UPIO_MEM;
>   	port->mapbase = res_mem->start;
>   	port->mapsize = resource_size(res_mem);
> @@ -776,6 +774,13 @@ static int meson_uart_remove(struct platform_device *pdev)
>   	uart_remove_one_port(&meson_uart_driver, port);
>   	meson_ports[pdev->id] = NULL;
>   
> +	for (int id = 0; id < AML_UART_PORT_NUM; id++)
> +		if (meson_ports[id])
> +			return 0;
> +
> +	/* No more available uart ports, unregister uart driver */
> +	uart_unregister_driver(&meson_uart_driver);
> +
>   	return 0;
>   }
>   
> @@ -809,33 +814,7 @@ static  struct platform_driver meson_uart_platform_driver = {
>   	},
>   };
>   
> -static int __init meson_uart_init(void)
> -{
> -	int ret;
> -
> -	ret = meson_serial_console_init();
> -	if (ret)
> -		return ret;
> -	
> -	ret = uart_register_driver(&meson_uart_driver);
> -	if (ret)
> -		return ret;
> -
> -	ret = platform_driver_register(&meson_uart_platform_driver);
> -	if (ret)
> -		uart_unregister_driver(&meson_uart_driver);
> -
> -	return ret;
> -}
> -
> -static void __exit meson_uart_exit(void)
> -{
> -	platform_driver_unregister(&meson_uart_platform_driver);
> -	uart_unregister_driver(&meson_uart_driver);
> -}
> -
> -module_init(meson_uart_init);
> -module_exit(meson_uart_exit);
> +module_platform_driver(meson_uart_platform_driver);
>   
>   MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
>   MODULE_DESCRIPTION("Amlogic Meson serial port driver");

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff mbox series

Patch

diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index bca54f3d92a1..dcf994a11a21 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -621,12 +621,6 @@  static struct console meson_serial_console = {
 	.data		= &meson_uart_driver,
 };
 
-static int __init meson_serial_console_init(void)
-{
-	register_console(&meson_serial_console);
-	return 0;
-}
-
 static void meson_serial_early_console_write(struct console *co,
 					     const char *s,
 					     u_int count)
@@ -652,9 +646,6 @@  OF_EARLYCON_DECLARE(meson, "amlogic,meson-ao-uart",
 
 #define MESON_SERIAL_CONSOLE	(&meson_serial_console)
 #else
-static int __init meson_serial_console_init(void) {
-	return 0;
-}
 #define MESON_SERIAL_CONSOLE	NULL
 #endif
 
@@ -738,6 +729,13 @@  static int meson_uart_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	if (!meson_uart_driver.state) {
+		ret = uart_register_driver(&meson_uart_driver);
+		if (ret)
+			return dev_err_probe(&pdev->dev, ret,
+					     "can't register uart driver\n");
+	}
+
 	port->iotype = UPIO_MEM;
 	port->mapbase = res_mem->start;
 	port->mapsize = resource_size(res_mem);
@@ -776,6 +774,13 @@  static int meson_uart_remove(struct platform_device *pdev)
 	uart_remove_one_port(&meson_uart_driver, port);
 	meson_ports[pdev->id] = NULL;
 
+	for (int id = 0; id < AML_UART_PORT_NUM; id++)
+		if (meson_ports[id])
+			return 0;
+
+	/* No more available uart ports, unregister uart driver */
+	uart_unregister_driver(&meson_uart_driver);
+
 	return 0;
 }
 
@@ -809,33 +814,7 @@  static  struct platform_driver meson_uart_platform_driver = {
 	},
 };
 
-static int __init meson_uart_init(void)
-{
-	int ret;
-
-	ret = meson_serial_console_init();
-	if (ret)
-		return ret;
-	
-	ret = uart_register_driver(&meson_uart_driver);
-	if (ret)
-		return ret;
-
-	ret = platform_driver_register(&meson_uart_platform_driver);
-	if (ret)
-		uart_unregister_driver(&meson_uart_driver);
-
-	return ret;
-}
-
-static void __exit meson_uart_exit(void)
-{
-	platform_driver_unregister(&meson_uart_platform_driver);
-	uart_unregister_driver(&meson_uart_driver);
-}
-
-module_init(meson_uart_init);
-module_exit(meson_uart_exit);
+module_platform_driver(meson_uart_platform_driver);
 
 MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
 MODULE_DESCRIPTION("Amlogic Meson serial port driver");