diff mbox series

[v4,16/17] rtc: pcf2127: add UIE support for PCF2131

Message ID 20230622145800.2442116-17-hugo@hugovil.com
State New
Headers show
Series rtc: pcf2127: add PCF2131 driver | expand

Commit Message

Hugo Villeneuve June 22, 2023, 2:57 p.m. UTC 
From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

The PCF2127/29 do NOT support alarms with a 1 second resolution, but
the PCF2131 does.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
---
 drivers/rtc/rtc-pcf2127.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index 9da3f0096d6b..0ff589789aea 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -1128,8 +1128,16 @@  static int pcf2127_probe(struct device *dev, struct regmap *regmap,
 	pcf2127->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
 	pcf2127->rtc->range_max = RTC_TIMESTAMP_END_2099;
 	pcf2127->rtc->set_start_time = true; /* Sets actual start to 1970 */
-	set_bit(RTC_FEATURE_ALARM_RES_2S, pcf2127->rtc->features);
-	clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, pcf2127->rtc->features);
+
+	/*
+	 * PCF2127/29 do not work correctly when setting alarms at 1s intervals.
+	 * PCF2131 is ok.
+	 */
+	if (pcf2127->cfg->type == PCF2127 || pcf2127->cfg->type == PCF2129) {
+		set_bit(RTC_FEATURE_ALARM_RES_2S, pcf2127->rtc->features);
+		clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, pcf2127->rtc->features);
+	}
+
 	clear_bit(RTC_FEATURE_ALARM, pcf2127->rtc->features);
 
 	if (alarm_irq > 0) {