@@ -62,6 +62,15 @@ config FSI_MASTER_ASPEED
Enable it for your BMC kernel in an OpenPower or IBM Power system.
+config FSI_MASTER_I2CR
+ tristate "IBM I2C Responder virtual FSI master"
+ depends on I2C
+ help
+ This option enables a virtual FSI master in order to access a CFAM
+ behind an IBM I2C Responder (I2CR) chip. The I2CR is an I2C device
+ that translates I2C commands to CFAM or SCOM operations, effectively
+ implementing an FSI master and bus.
+
config FSI_SCOM
tristate "SCOM FSI client device driver"
help
@@ -4,6 +4,7 @@ obj-$(CONFIG_FSI) += fsi-core.o
obj-$(CONFIG_FSI_MASTER_HUB) += fsi-master-hub.o
obj-$(CONFIG_FSI_MASTER_ASPEED) += fsi-master-aspeed.o
obj-$(CONFIG_FSI_MASTER_GPIO) += fsi-master-gpio.o
+obj-$(CONFIG_FSI_MASTER_I2CR) += fsi-master-i2cr.o
obj-$(CONFIG_FSI_MASTER_AST_CF) += fsi-master-ast-cf.o
obj-$(CONFIG_FSI_SCOM) += fsi-scom.o
obj-$(CONFIG_FSI_SBEFIFO) += fsi-sbefifo.o
new file mode 100644
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) IBM Corporation 2023 */
+
+#include <linux/device.h>
+#include <linux/fsi.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/mutex.h>
+
+#include "fsi-master-i2cr.h"
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/fsi_master_i2cr.h>
+
+#define I2CR_ADDRESS_CFAM(a) ((a) >> 2)
+#define I2CR_INITIAL_PARITY true
+
+#define I2CR_STATUS_CMD 0x60002
+#define I2CR_STATUS_ERR BIT_ULL(61)
+#define I2CR_ERROR_CMD 0x60004
+#define I2CR_LOG_CMD 0x60008
+
+static const u8 i2cr_cfam[] = {
+ 0xc0, 0x02, 0x0d, 0xa6,
+ 0x80, 0x01, 0x10, 0x02,
+ 0x80, 0x01, 0x10, 0x02,
+ 0x80, 0x01, 0x10, 0x02,
+ 0x80, 0x01, 0x80, 0x52,
+ 0x80, 0x01, 0x10, 0x02,
+ 0x80, 0x01, 0x10, 0x02,
+ 0x80, 0x01, 0x10, 0x02,
+ 0x80, 0x01, 0x10, 0x02,
+ 0x80, 0x01, 0x22, 0x2d,
+ 0x00, 0x00, 0x00, 0x00,
+ 0xde, 0xad, 0xc0, 0xde
+};
+
+static bool i2cr_check_parity32(u32 v, bool parity)
+{
+ u32 i;
+
+ for (i = 0; i < 32; ++i) {
+ if (v & (1u << i))
+ parity = !parity;
+ }
+
+ return parity;
+}
+
+static bool i2cr_check_parity64(u64 v)
+{
+ u32 i;
+ bool parity = I2CR_INITIAL_PARITY;
+
+ for (i = 0; i < 64; ++i) {
+ if (v & (1llu << i))
+ parity = !parity;
+ }
+
+ return parity;
+}
+
+static u32 i2cr_get_command(u32 address, bool parity)
+{
+ address <<= 1;
+
+ if (i2cr_check_parity32(address, parity))
+ address |= 1;
+
+ return address;
+}
+
+static int i2cr_transfer(struct i2c_client *client, u32 command, u64 *data)
+{
+ struct i2c_msg msgs[2];
+ int ret;
+
+ msgs[0].addr = client->addr;
+ msgs[0].flags = 0;
+ msgs[0].len = sizeof(command);
+ msgs[0].buf = (__u8 *)&command;
+ msgs[1].addr = client->addr;
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].len = sizeof(*data);
+ msgs[1].buf = (__u8 *)data;
+
+ ret = i2c_transfer(client->adapter, msgs, 2);
+ if (ret == 2)
+ return 0;
+
+ trace_i2cr_i2c_error(client, command, ret);
+
+ if (ret < 0)
+ return ret;
+
+ return -EIO;
+}
+
+static int i2cr_check_status(struct i2c_client *client)
+{
+ u64 status;
+ int ret;
+
+ ret = i2cr_transfer(client, I2CR_STATUS_CMD, &status);
+ if (ret)
+ return ret;
+
+ if (status & I2CR_STATUS_ERR) {
+ u32 buf[3] = { 0, 0, 0 };
+ u64 error;
+ u64 log;
+
+ i2cr_transfer(client, I2CR_ERROR_CMD, &error);
+ i2cr_transfer(client, I2CR_LOG_CMD, &log);
+
+ trace_i2cr_status_error(client, status, error, log);
+
+ buf[0] = I2CR_STATUS_CMD;
+ i2c_master_send(client, (const char *)buf, sizeof(buf));
+
+ buf[0] = I2CR_ERROR_CMD;
+ i2c_master_send(client, (const char *)buf, sizeof(buf));
+
+ buf[0] = I2CR_LOG_CMD;
+ i2c_master_send(client, (const char *)buf, sizeof(buf));
+
+ dev_err(&client->dev, "status:%016llx error:%016llx log:%016llx\n", status, error,
+ log);
+ return -EREMOTEIO;
+ }
+
+ trace_i2cr_status(client, status);
+ return 0;
+}
+
+int fsi_master_i2cr_read(struct fsi_master_i2cr *i2cr, u32 addr, u64 *data)
+{
+ u32 command = i2cr_get_command(addr, I2CR_INITIAL_PARITY);
+ int ret;
+
+ mutex_lock(&i2cr->lock);
+
+ ret = i2cr_transfer(i2cr->client, command, data);
+ if (ret)
+ goto unlock;
+
+ ret = i2cr_check_status(i2cr->client);
+ if (ret)
+ goto unlock;
+
+ trace_i2cr_read(i2cr->client, command, data);
+
+unlock:
+ mutex_unlock(&i2cr->lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(fsi_master_i2cr_read);
+
+int fsi_master_i2cr_write(struct fsi_master_i2cr *i2cr, u32 addr, u64 data)
+{
+ u32 buf[3] = { 0 };
+ int ret;
+
+ buf[0] = i2cr_get_command(addr, i2cr_check_parity64(data));
+ memcpy(&buf[1], &data, sizeof(data));
+
+ mutex_lock(&i2cr->lock);
+
+ ret = i2c_master_send(i2cr->client, (const char *)buf, sizeof(buf));
+ if (ret == sizeof(buf)) {
+ ret = i2cr_check_status(i2cr->client);
+ if (!ret)
+ trace_i2cr_write(i2cr->client, buf[0], data);
+ } else {
+ trace_i2cr_i2c_error(i2cr->client, buf[0], ret);
+
+ if (ret >= 0)
+ ret = -EIO;
+ }
+
+ mutex_unlock(&i2cr->lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(fsi_master_i2cr_write);
+
+static int i2cr_read(struct fsi_master *master, int link, uint8_t id, uint32_t addr, void *val,
+ size_t size)
+{
+ struct fsi_master_i2cr *i2cr = container_of(master, struct fsi_master_i2cr, master);
+ u64 data;
+ size_t i;
+ int ret;
+
+ if (link || id || (addr & 0xffff0000) || !(size == 1 || size == 2 || size == 4))
+ return -EINVAL;
+
+ /*
+ * The I2CR doesn't have CFAM or FSI slave address space - only the
+ * engines. In order for this to work with the FSI core, we need to
+ * emulate at minimum the CFAM config table so that the appropriate
+ * engines are discovered.
+ */
+ if (addr < 0xc00) {
+ if (addr > sizeof(i2cr_cfam) - 4)
+ addr = (addr & 0x3) + (sizeof(i2cr_cfam) - 4);
+
+ memcpy(val, &i2cr_cfam[addr], size);
+ return 0;
+ }
+
+ ret = fsi_master_i2cr_read(i2cr, I2CR_ADDRESS_CFAM(addr), &data);
+ if (ret)
+ return ret;
+
+ /*
+ * FSI core expects up to 4 bytes BE back, while I2CR replied with LE
+ * bytes on the wire.
+ */
+ for (i = 0; i < size; ++i)
+ ((u8 *)val)[i] = ((u8 *)&data)[7 - i];
+
+ return 0;
+}
+
+static int i2cr_write(struct fsi_master *master, int link, uint8_t id, uint32_t addr,
+ const void *val, size_t size)
+{
+ struct fsi_master_i2cr *i2cr = container_of(master, struct fsi_master_i2cr, master);
+ u64 data = 0;
+ size_t i;
+
+ if (link || id || (addr & 0xffff0000) || !(size == 1 || size == 2 || size == 4))
+ return -EINVAL;
+
+ /* I2CR writes to CFAM or FSI slave address are a successful no-op. */
+ if (addr < 0xc00)
+ return 0;
+
+ /*
+ * FSI core passes up to 4 bytes BE, while the I2CR expects LE bytes on
+ * the wire.
+ */
+ for (i = 0; i < size; ++i)
+ ((u8 *)&data)[7 - i] = ((u8 *)val)[i];
+
+ return fsi_master_i2cr_write(i2cr, I2CR_ADDRESS_CFAM(addr), data);
+}
+
+static void i2cr_release(struct device *dev)
+{
+ struct fsi_master_i2cr *i2cr = to_fsi_master_i2cr(to_fsi_master(dev));
+
+ of_node_put(dev->of_node);
+
+ kfree(i2cr);
+}
+
+static int i2cr_probe(struct i2c_client *client)
+{
+ struct fsi_master_i2cr *i2cr;
+ int ret;
+
+ i2cr = kzalloc(sizeof(*i2cr), GFP_KERNEL);
+ if (!i2cr)
+ return -ENOMEM;
+
+ /* Only one I2CR on any given I2C bus (fixed I2C device address) */
+ i2cr->master.idx = client->adapter->nr;
+ dev_set_name(&i2cr->master.dev, "i2cr%d", i2cr->master.idx);
+ i2cr->master.dev.parent = &client->dev;
+ i2cr->master.dev.of_node = of_node_get(dev_of_node(&client->dev));
+ i2cr->master.dev.release = i2cr_release;
+
+ i2cr->master.n_links = 1;
+ i2cr->master.read = i2cr_read;
+ i2cr->master.write = i2cr_write;
+
+ mutex_init(&i2cr->lock);
+ i2cr->client = client;
+
+ ret = fsi_master_register(&i2cr->master);
+ if (ret)
+ return ret;
+
+ i2c_set_clientdata(client, i2cr);
+ return 0;
+}
+
+static void i2cr_remove(struct i2c_client *client)
+{
+ struct fsi_master_i2cr *i2cr = i2c_get_clientdata(client);
+
+ fsi_master_unregister(&i2cr->master);
+}
+
+static const struct of_device_id i2cr_ids[] = {
+ { .compatible = "ibm,i2cr-fsi-master" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, i2cr_ids);
+
+static struct i2c_driver i2cr_driver = {
+ .probe_new = i2cr_probe,
+ .remove = i2cr_remove,
+ .driver = {
+ .name = "fsi-master-i2cr",
+ .of_match_table = i2cr_ids,
+ },
+};
+
+module_i2c_driver(i2cr_driver)
+
+MODULE_AUTHOR("Eddie James <eajames@linux.ibm.com>");
+MODULE_DESCRIPTION("IBM I2C Responder virtual FSI master driver");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) IBM Corporation 2023 */
+
+#ifndef DRIVERS_FSI_MASTER_I2CR_H
+#define DRIVERS_FSI_MASTER_I2CR_H
+
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+
+#include "fsi-master.h"
+
+struct i2c_client;
+
+struct fsi_master_i2cr {
+ struct fsi_master master;
+ struct mutex lock; /* protect HW access */
+ struct i2c_client *client;
+};
+
+#define to_fsi_master_i2cr(m) container_of(m, struct fsi_master_i2cr, master)
+
+int fsi_master_i2cr_read(struct fsi_master_i2cr *i2cr, u32 addr, u64 *data);
+int fsi_master_i2cr_write(struct fsi_master_i2cr *i2cr, u32 addr, u64 data);
+
+static inline bool is_fsi_master_i2cr(struct fsi_master *master)
+{
+ if (master->dev.parent && master->dev.parent->type == &i2c_client_type)
+ return true;
+
+ return false;
+}
+
+#endif /* DRIVERS_FSI_MASTER_I2CR_H */
new file mode 100644
@@ -0,0 +1,107 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM fsi_master_i2cr
+
+#if !defined(_TRACE_FSI_MASTER_I2CR_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_FSI_MASTER_I2CR_H
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(i2cr_i2c_error,
+ TP_PROTO(const struct i2c_client *client, uint32_t command, int rc),
+ TP_ARGS(client, command, rc),
+ TP_STRUCT__entry(
+ __field(int, bus)
+ __field(int, rc)
+ __array(unsigned char, command, sizeof(uint32_t))
+ __field(unsigned short, addr)
+ ),
+ TP_fast_assign(
+ __entry->bus = client->adapter->nr;
+ __entry->rc = rc;
+ memcpy(__entry->command, &command, sizeof(uint32_t));
+ __entry->addr = client->addr;
+ ),
+ TP_printk("%d-%02x command:{ %*ph } rc:%d", __entry->bus, __entry->addr,
+ (int)sizeof(uint32_t), __entry->command, __entry->rc)
+);
+
+TRACE_EVENT(i2cr_read,
+ TP_PROTO(const struct i2c_client *client, uint32_t command, uint64_t *data),
+ TP_ARGS(client, command, data),
+ TP_STRUCT__entry(
+ __field(int, bus)
+ __array(unsigned char, data, sizeof(uint64_t))
+ __array(unsigned char, command, sizeof(uint32_t))
+ __field(unsigned short, addr)
+ ),
+ TP_fast_assign(
+ __entry->bus = client->adapter->nr;
+ memcpy(__entry->data, data, sizeof(uint64_t));
+ memcpy(__entry->command, &command, sizeof(uint32_t));
+ __entry->addr = client->addr;
+ ),
+ TP_printk("%d-%02x command:{ %*ph } { %*ph }", __entry->bus, __entry->addr,
+ (int)sizeof(uint32_t), __entry->command, (int)sizeof(uint64_t), __entry->data)
+);
+
+TRACE_EVENT(i2cr_status,
+ TP_PROTO(const struct i2c_client *client, uint64_t status),
+ TP_ARGS(client, status),
+ TP_STRUCT__entry(
+ __field(uint64_t, status)
+ __field(int, bus)
+ __field(unsigned short, addr)
+ ),
+ TP_fast_assign(
+ __entry->status = status;
+ __entry->bus = client->adapter->nr;
+ __entry->addr = client->addr;
+ ),
+ TP_printk("%d-%02x %016llx", __entry->bus, __entry->addr, __entry->status)
+);
+
+TRACE_EVENT(i2cr_status_error,
+ TP_PROTO(const struct i2c_client *client, uint64_t status, uint64_t error, uint64_t log),
+ TP_ARGS(client, status, error, log),
+ TP_STRUCT__entry(
+ __field(uint64_t, error)
+ __field(uint64_t, log)
+ __field(uint64_t, status)
+ __field(int, bus)
+ __field(unsigned short, addr)
+ ),
+ TP_fast_assign(
+ __entry->error = error;
+ __entry->log = log;
+ __entry->status = status;
+ __entry->bus = client->adapter->nr;
+ __entry->addr = client->addr;
+ ),
+ TP_printk("%d-%02x status:%016llx error:%016llx log:%016llx", __entry->bus, __entry->addr,
+ __entry->status, __entry->error, __entry->log)
+);
+
+TRACE_EVENT(i2cr_write,
+ TP_PROTO(const struct i2c_client *client, uint32_t command, uint64_t data),
+ TP_ARGS(client, command, data),
+ TP_STRUCT__entry(
+ __field(int, bus)
+ __array(unsigned char, data, sizeof(uint64_t))
+ __array(unsigned char, command, sizeof(uint32_t))
+ __field(unsigned short, addr)
+ ),
+ TP_fast_assign(
+ __entry->bus = client->adapter->nr;
+ memcpy(__entry->data, &data, sizeof(uint64_t));
+ memcpy(__entry->command, &command, sizeof(uint32_t));
+ __entry->addr = client->addr;
+ ),
+ TP_printk("%d-%02x command:{ %*ph } { %*ph }", __entry->bus, __entry->addr,
+ (int)sizeof(uint32_t), __entry->command, (int)sizeof(uint64_t), __entry->data)
+);
+
+#endif
+
+#include <trace/define_trace.h>
The I2C Responder (I2CR) is an I2C device that translates I2C commands to CFAM or SCOM operations, effectively implementing an FSI master and bus. Signed-off-by: Eddie James <eajames@linux.ibm.com> --- drivers/fsi/Kconfig | 9 + drivers/fsi/Makefile | 1 + drivers/fsi/fsi-master-i2cr.c | 316 +++++++++++++++++++++++++ drivers/fsi/fsi-master-i2cr.h | 33 +++ include/trace/events/fsi_master_i2cr.h | 107 +++++++++ 5 files changed, 466 insertions(+) create mode 100644 drivers/fsi/fsi-master-i2cr.c create mode 100644 drivers/fsi/fsi-master-i2cr.h create mode 100644 include/trace/events/fsi_master_i2cr.h