@@ -421,6 +421,20 @@ config TOUCHSCREEN_GOODIX_BERLIN_CORE
depends on REGMAP
tristate
+config TOUCHSCREEN_GOODIX_BERLIN_I2C
+ tristate "Goodix Berlin I2C touchscreen"
+ depends on I2C
+ depends on REGMAP_I2C
+ select TOUCHSCREEN_GOODIX_BERLIN_CORE
+ help
+ Say Y here if you have the a touchscreen connected to your
+ system using the Goodix Berlin IC connection via I2C.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called goodix_berlin_i2c.
+
config TOUCHSCREEN_HIDEEP
tristate "HiDeep Touch IC"
depends on I2C
@@ -48,6 +48,7 @@ obj-$(CONFIG_TOUCHSCREEN_EXC3000) += exc3000.o
obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix_ts.o
obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_CORE) += goodix_berlin_core.o
+obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C) += goodix_berlin_i2c.o
obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o
obj-$(CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX) += hynitron_cstxxx.o
obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
new file mode 100644
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Goodix Berlin Touchscreen Driver
+ *
+ * Copyright (C) 2020 - 2021 Goodix, Inc.
+ * Copyright (C) 2023 Linaro Ltd.
+ *
+ * Based on goodix_ts_berlin driver.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <asm/unaligned.h>
+
+#include "goodix_berlin.h"
+
+#define I2C_MAX_TRANSFER_SIZE 256
+
+static const struct regmap_config goodix_berlin_i2c_regmap_conf = {
+ .reg_bits = 32,
+ .val_bits = 8,
+ .max_raw_read = I2C_MAX_TRANSFER_SIZE,
+ .max_raw_write = I2C_MAX_TRANSFER_SIZE,
+};
+
+static const struct input_id goodix_berlin_i2c_input_id = {
+ .bustype = BUS_I2C,
+ .vendor = 0x0416,
+ .product = 0x1001,
+};
+
+static int goodix_berlin_i2c_probe(struct i2c_client *client)
+{
+ struct regmap *map;
+
+ map = devm_regmap_init_i2c(client, &goodix_berlin_i2c_regmap_conf);
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+
+ return goodix_berlin_probe(&client->dev, client->irq,
+ &goodix_berlin_i2c_input_id, map);
+}
+
+static void goodix_berlin_i2c_remove(struct i2c_client *client)
+{
+ goodix_berlin_remove(&client->dev);
+}
+
+static const struct i2c_device_id goodix_berlin_i2c_id[] = {
+ { "gt9916", 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, goodix_berlin_i2c_id);
+
+static const struct of_device_id goodix_berlin_i2c_of_match[] = {
+ { .compatible = "goodix,gt9916", },
+ { },
+};
+
+static struct i2c_driver goodix_berlin_i2c_driver = {
+ .driver = {
+ .name = "goodix-berlin-i2c",
+ .of_match_table = goodix_berlin_i2c_of_match,
+ .pm = pm_sleep_ptr(&goodix_berlin_pm_ops),
+ },
+ .probe = goodix_berlin_i2c_probe,
+ .remove = goodix_berlin_i2c_remove,
+ .id_table = goodix_berlin_i2c_id,
+};
+module_i2c_driver(goodix_berlin_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Goodix Berlin I2C Touchscreen driver");
+MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>");
Add initial support for the new Goodix "Berlin" touchscreen ICs over the I2C interface. This initial driver is derived from the Goodix goodix_ts_berlin available at [1] and [2] and only supports the GT9916 IC present on the Qualcomm SM8550 MTP & QRD touch panel. The current implementation only supports BerlinD, aka GT9916. [1] https://github.com/goodix/goodix_ts_berlin [2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- drivers/input/touchscreen/Kconfig | 14 +++++ drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/goodix_berlin_i2c.c | 76 +++++++++++++++++++++++++++ 3 files changed, 91 insertions(+)