From patchwork Mon Jun 5 04:07:49 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Jacky Huang X-Patchwork-Id: 689551 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id AC291C7EE2F for ; Mon, 5 Jun 2023 04:10:22 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232956AbjFEEKT (ORCPT ); Mon, 5 Jun 2023 00:10:19 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:44690 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232690AbjFEEJW (ORCPT ); Mon, 5 Jun 2023 00:09:22 -0400 Received: from mail-oa1-x2b.google.com (mail-oa1-x2b.google.com [IPv6:2001:4860:4864:20::2b]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 59FF810CE; Sun, 4 Jun 2023 21:08:33 -0700 (PDT) Received: by mail-oa1-x2b.google.com with SMTP id 586e51a60fabf-19e7008a20aso4048006fac.1; Sun, 04 Jun 2023 21:08:33 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20221208; t=1685938112; x=1688530112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=1hQKPNL1o5stxT7FL8oHCdM7hy+Dw2Qui0mpQCk/MQA=; b=MGnntvyh1nhOOae9Ex2HpbKweqkbBcjBROnHV0e0IRO+LQA4rntD960c7r9raJuPdo ssfjZrHz3IIfBSAFPK2SOJeyTd8rv6cuxy40m1cq3Zd7c0pNRrVbx8cgHETP6WHJ/kwV 4faF+o7rmM6kkdNXpj3Wg+0nhMJIEDiOnaDF47QvQfqO5lZSR9XQhZ0QYKJ7Z04Bjw7c MSXmN0Os3fwgTea/4S7QZfqf8V5lLEx1JGdQv62PZjZrESZw0lNxsSVxhFILpXwdvQiM t+ITN/yz6D7DPMIOXxnAd1yg0VM4oWgQ3sBYxUjHTz1hK2UDqKwcHLXoVwlVB01VJAib FrDQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1685938112; x=1688530112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=1hQKPNL1o5stxT7FL8oHCdM7hy+Dw2Qui0mpQCk/MQA=; b=G0XZ+0S14HOjlC6V/Ltf8iFgr62weGIn+xwLVCRsfWmTFmwFTUlg/bqCkrIfNfP7H8 pShdRsKCZVvdZ9M8Mu5XQADkZ7AAQ0YRn95v/1zPx/5lrRpHRuxETHqNbHYHgpVcb7wM J/y92hmLzo16DrPQmMN41AaIIYRzIx4ZUO/Rx1aJfe0KTAxo1EdxIQNMZlVxYdtPut23 6Fh1NJamN+s3xInTWkF4MZNEIdQnFENKLmjRzAaXz5H5ZlSDfbCRgd0exv6yrPUCqzhw OCXK6qAwCLVmiRI7wyU1bU6wg9kjJyzaE5FVd5uIxaLjr3gv0EJde+M4vVuGIox4qQcU DXyQ== X-Gm-Message-State: AC+VfDwSuoV+Oa+u/XiLRoM8nAwKseDAuCeoBd7y12JTUxixgyMZh80P qFcyi55ypbN7VNvvp5D1Psc= X-Google-Smtp-Source: ACHHUZ5wTd3oVUAD4DfVJaSsSoyd1TUYPUpiqboUAI7o3sONUAHDFKwkoCEI7pLLjmXSFhzd7QB7sw== X-Received: by 2002:a05:6870:e742:b0:19a:1a20:198a with SMTP id t2-20020a056870e74200b0019a1a20198amr7867836oak.7.1685938112388; Sun, 04 Jun 2023 21:08:32 -0700 (PDT) Received: from a28aa0606c51.. (60-250-192-107.hinet-ip.hinet.net. [60.250.192.107]) by smtp.gmail.com with ESMTPSA id b4-20020a170903228400b001b21bcea439sm206164plh.170.2023.06.04.21.08.29 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 04 Jun 2023 21:08:32 -0700 (PDT) From: Jacky Huang To: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, lee@kernel.org, mturquette@baylibre.com, sboyd@kernel.org, p.zabel@pengutronix.de, gregkh@linuxfoundation.org, jirislaby@kernel.org, tmaimon77@gmail.com, catalin.marinas@arm.com, will@kernel.org Cc: devicetree@vger.kernel.org, linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-serial@vger.kernel.org, arnd@arndb.de, soc@kernel.org, schung@nuvoton.com, mjchen@nuvoton.com, Jacky Huang Subject: [PATCH v13 10/10] tty: serial: Add Nuvoton ma35d1 serial driver support Date: Mon, 5 Jun 2023 04:07:49 +0000 Message-Id: <20230605040749.67964-11-ychuang570808@gmail.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20230605040749.67964-1-ychuang570808@gmail.com> References: <20230605040749.67964-1-ychuang570808@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Jacky Huang This adds UART and console driver for Nuvoton ma35d1 Soc. It supports full-duplex communication, FIFO control, and hardware flow control. Signed-off-by: Jacky Huang --- drivers/tty/serial/Kconfig | 18 + drivers/tty/serial/Makefile | 1 + drivers/tty/serial/ma35d1_serial.c | 808 +++++++++++++++++++++++++++++ include/uapi/linux/serial_core.h | 3 + 4 files changed, 830 insertions(+) create mode 100644 drivers/tty/serial/ma35d1_serial.c diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 3e3fb377d90d..71ea5138adce 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1555,6 +1555,24 @@ config SERIAL_SUNPLUS_CONSOLE you can alter that using a kernel command line option such as "console=ttySUPx". +config SERIAL_NUVOTON_MA35D1 + tristate "Nuvoton MA35D1 family UART support" + depends on ARCH_MA35 || COMPILE_TEST + select SERIAL_CORE + help + This driver supports Nuvoton MA35D1 family UART ports. If you would + like to use them, you must answer Y or M to this option. Note that + for use as console, it must be included in kernel and not as a + module + +config SERIAL_NUVOTON_MA35D1_CONSOLE + bool "Console on a Nuvotn MA35D1 family UART port" + depends on SERIAL_NUVOTON_MA35D1=y + select SERIAL_CORE_CONSOLE + help + Select this options if you'd like to use the UART port0 of the + Nuvoton MA35D1 family as a console. + endmenu config SERIAL_MCTRL_GPIO diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index cd9afd9e3018..0e823851c42c 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -93,3 +93,4 @@ obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o obj-$(CONFIG_SERIAL_KGDB_NMI) += kgdb_nmi.o obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o +obj-$(CONFIG_SERIAL_NUVOTON_MA35D1) += ma35d1_serial.o diff --git a/drivers/tty/serial/ma35d1_serial.c b/drivers/tty/serial/ma35d1_serial.c new file mode 100644 index 000000000000..6c19da7731a6 --- /dev/null +++ b/drivers/tty/serial/ma35d1_serial.c @@ -0,0 +1,808 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * MA35D1 serial driver + * Copyright (C) 2023 Nuvoton Technology Corp. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MA35_UART_NR 17 + +#define MA35_RBR_REG 0x00 +#define MA35_THR_REG 0x00 +#define MA35_IER_REG 0x04 +#define MA35_FCR_REG 0x08 +#define MA35_LCR_REG 0x0C +#define MA35_MCR_REG 0x10 +#define MA35_MSR_REG 0x14 +#define MA35_FSR_REG 0x18 +#define MA35_ISR_REG 0x1C +#define MA35_TOR_REG 0x20 +#define MA35_BAUD_REG 0x24 +#define MA35_ALTCTL_REG 0x2C +#define MA35_FUN_SEL_REG 0x30 +#define MA35_WKCTL_REG 0x40 +#define MA35_WKSTS_REG 0x44 + +/* MA35_IER_REG - Interrupt Enable Register */ +#define MA35_IER_RDA_IEN BIT(0) /* RBR Available Interrupt Enable */ +#define MA35_IER_THRE_IEN BIT(1) /* THR Empty Interrupt Enable */ +#define MA35_IER_RLS_IEN BIT(2) /* RX Line Status Interrupt Enable */ +#define MA35_IER_RTO_IEN BIT(4) /* RX Time-out Interrupt Enable */ +#define MA35_IER_BUFERR_IEN BIT(5) /* Buffer Error Interrupt Enable */ +#define MA35_IER_TIME_OUT_EN BIT(11) /* RX Buffer Time-out Counter Enable */ +#define MA35_IER_AUTO_RTS BIT(12) /* nRTS Auto-flow Control Enable */ +#define MA35_IER_AUTO_CTS BIT(13) /* nCTS Auto-flow Control Enable */ + +/* MA35_FCR_REG - FIFO Control Register */ +#define MA35_FCR_RFR BIT(1) /* RX Field Software Reset */ +#define MA35_FCR_TFR BIT(2) /* TX Field Software Reset */ +#define MA35_FCR_RFITL_MASK GENMASK(7, 4) /* RX FIFO Interrupt Trigger Level */ +#define MA35_FCR_RFITL_1BYTE FIELD_PREP(MA35_FCR_RFITL_MASK, 0) +#define MA35_FCR_RFITL_4BYTES FIELD_PREP(MA35_FCR_RFITL_MASK, 1) +#define MA35_FCR_RFITL_8BYTES FIELD_PREP(MA35_FCR_RFITL_MASK, 2) +#define MA35_FCR_RFITL_14BYTES FIELD_PREP(MA35_FCR_RFITL_MASK, 3) +#define MA35_FCR_RFITL_30BYTES FIELD_PREP(MA35_FCR_RFITL_MASK, 4) +#define MA35_FCR_RTSTL_MASK GENMASK(19, 16) /* nRTS Trigger Level */ +#define MA35_FCR_RTSTL_1BYTE FIELD_PREP(MA35_FCR_RTSTL_MASK, 0) +#define MA35_FCR_RTSTL_4BYTES FIELD_PREP(MA35_FCR_RTSTL_MASK, 1) +#define MA35_FCR_RTSTL_8BYTES FIELD_PREP(MA35_FCR_RTSTL_MASK, 2) +#define MA35_FCR_RTSTL_14BYTES FIELD_PREP(MA35_FCR_RTSTL_MASK, 3) +#define MA35_FCR_RTSTLL_30BYTES FIELD_PREP(MA35_FCR_RTSTL_MASK, 4) + +/* MA35_LCR_REG - Line Control Register */ +#define MA35_LCR_NSB BIT(2) /* Number of “STOP Bit” */ +#define MA35_LCR_PBE BIT(3) /* Parity Bit Enable */ +#define MA35_LCR_EPE BIT(4) /* Even Parity Enable */ +#define MA35_LCR_SPE BIT(5) /* Stick Parity Enable */ +#define MA35_LCR_BREAK BIT(6) /* Break Control */ +#define MA35_LCR_WLS_MASK GENMASK(1, 0) /* Word Length Selection */ +#define MA35_LCR_WLS_5BITS FIELD_PREP(MA35_LCR_WLS_MASK, 0) +#define MA35_LCR_WLS_6BITS FIELD_PREP(MA35_LCR_WLS_MASK, 1) +#define MA35_LCR_WLS_7BITS FIELD_PREP(MA35_LCR_WLS_MASK, 2) +#define MA35_LCR_WLS_8BITS FIELD_PREP(MA35_LCR_WLS_MASK, 3) + +/* MA35_MCR_REG - Modem Control Register */ +#define MA35_MCR_RTS_CTRL BIT(1) /* nRTS Signal Control */ +#define MA35_MCR_RTSACTLV BIT(9) /* nRTS Pin Active Level */ +#define MA35_MCR_RTSSTS BIT(13) /* nRTS Pin Status (Read Only) */ + +/* MA35_MSR_REG - Modem Status Register */ +#define MA35_MSR_CTSDETF BIT(0) /* Detect nCTS State Change Flag */ +#define MA35_MSR_CTSSTS BIT(4) /* nCTS Pin Status (Read Only) */ +#define MA35_MSR_CTSACTLV BIT(8) /* nCTS Pin Active Level */ + +/* MA35_FSR_REG - FIFO Status Register */ +#define MA35_FSR_RX_OVER_IF BIT(0) /* RX Overflow Error Interrupt Flag */ +#define MA35_FSR_PEF BIT(4) /* Parity Error Flag*/ +#define MA35_FSR_FEF BIT(5) /* Framing Error Flag */ +#define MA35_FSR_BIF BIT(6) /* Break Interrupt Flag */ +#define MA35_FSR_RX_EMPTY BIT(14) /* Receiver FIFO Empty (Read Only) */ +#define MA35_FSR_RX_FULL BIT(15) /* Receiver FIFO Full (Read Only) */ +#define MA35_FSR_TX_EMPTY BIT(22) /* Transmitter FIFO Empty (Read Only) */ +#define MA35_FSR_TX_FULL BIT(23) /* Transmitter FIFO Full (Read Only) */ +#define MA35_FSR_TX_OVER_IF BIT(24) /* TX Overflow Error Interrupt Flag */ +#define MA35_FSR_TE_FLAG BIT(28) /* Transmitter Empty Flag (Read Only) */ +#define MA35_FSR_RXPTR_MSK GENMASK(13, 8) /* TX FIFO Pointer mask */ +#define MA35_FSR_TXPTR_MSK GENMASK(21, 16) /* RX FIFO Pointer mask */ + +/* MA35_ISR_REG - Interrupt Status Register */ +#define MA35_ISR_RDA_IF BIT(0) /* RBR Available Interrupt Flag */ +#define MA35_ISR_THRE_IF BIT(1) /* THR Empty Interrupt Flag */ +#define MA35_ISR_RLSIF BIT(2) /* Receive Line Interrupt Flag */ +#define MA35_ISR_MODEMIF BIT(3) /* MODEM Interrupt Flag */ +#define MA35_ISR_RXTO_IF BIT(4) /* RX Time-out Interrupt Flag */ +#define MA35_ISR_BUFEIF BIT(5) /* Buffer Error Interrupt Flag */ +#define MA35_ISR_WK_IF BIT(6) /* UART Wake-up Interrupt Flag */ +#define MA35_ISR_RDAINT BIT(8) /* RBR Available Interrupt Indicator */ +#define MA35_ISR_THRE_INT BIT(9) /* THR Empty Interrupt Indicator */ +#define MA35_ISR_ALL 0xFFFFFFFF + +/* MA35_BAUD_REG - Baud Rate Divider Register */ +#define MA35_BAUD_MODE_MASK GENMASK(29, 28) +#define MA35_BAUD_MODE0 FIELD_PREP(MA35_BAUD_MODE_MASK, 0) +#define MA35_BAUD_MODE1 FIELD_PREP(MA35_BAUD_MODE_MASK, 2) +#define MA35_BAUD_MODE2 FIELD_PREP(MA35_BAUD_MODE_MASK, 3) +#define MA35_BAUD_MASK GENMASK(15, 0) + +/* MA35_ALTCTL_REG - Alternate Control/Status Register */ +#define MA35_ALTCTL_RS485AUD BIT(10) /* RS-485 Auto Direction Function */ + +/* MA35_FUN_SEL_REG - Function Select Register */ +#define MA35_FUN_SEL_MASK GENMASK(2, 0) +#define MA35_FUN_SEL_UART FIELD_PREP(MA35_FUN_SEL_MASK, 0) +#define MA35_FUN_SEL_RS485 FIELD_PREP(MA35_FUN_SEL_MASK, 3) + +/* The constrain for MA35D1 UART baud rate divider */ +#define MA35_BAUD_DIV_MAX 0xFFFF +#define MA35_BAUD_DIV_MIN 11 + +/* UART FIFO depth */ +#define MA35_UART_FIFO_DEPTH 32 +/* UART console clock */ +#define MA35_UART_CONSOLE_CLK (24 * HZ_PER_MHZ) +/* UART register ioremap size */ +#define MA35_UART_REG_SIZE 0x100 +/* Rx Timeout */ +#define MA35_UART_RX_TOUT 0x40 + +#define MA35_ISR_IF_CHECK (MA35_ISR_RDA_IF | MA35_ISR_RXTO_IF | \ + MA35_ISR_THRE_INT | MA35_ISR_BUFEIF) + +static struct uart_driver ma35d1serial_reg; + +struct uart_ma35d1_port { + struct uart_port port; + struct clk *clk; + u16 capabilities; /* port capabilities */ + u8 ier; + u8 lcr; + u8 mcr; + u32 baud_rate; + u32 console_baud_rate; + u32 console_line; + u32 console_int; +}; + +static struct uart_ma35d1_port ma35d1serial_ports[MA35_UART_NR]; + +static struct uart_ma35d1_port *to_ma35d1_uart_port(struct uart_port *uart) +{ + return container_of(uart, struct uart_ma35d1_port, port); +} + +static u32 serial_in(struct uart_ma35d1_port *p, u32 offset) +{ + return readl_relaxed(p->port.membase + offset); +} + +static void serial_out(struct uart_ma35d1_port *p, u32 offset, u32 value) +{ + writel_relaxed(value, p->port.membase + offset); +} + +static void __stop_tx(struct uart_ma35d1_port *p) +{ + u32 ier; + + ier = serial_in(p, MA35_IER_REG); + if (ier & MA35_IER_THRE_IEN) + serial_out(p, MA35_IER_REG, ier & ~MA35_IER_THRE_IEN); +} + +static void ma35d1serial_stop_tx(struct uart_port *port) +{ + struct uart_ma35d1_port *up = to_ma35d1_uart_port(port); + + __stop_tx(up); +} + +static void transmit_chars(struct uart_ma35d1_port *up) +{ + u32 count; + u8 ch; + + if (uart_tx_stopped(&up->port)) { + ma35d1serial_stop_tx(&up->port); + return; + } + count = MA35_UART_FIFO_DEPTH - FIELD_GET(MA35_FSR_TXPTR_MSK, + serial_in(up, MA35_FSR_REG)); + uart_port_tx_limited(&up->port, ch, count, + !(serial_in(up, MA35_FSR_REG) & MA35_FSR_TX_FULL), + serial_out(up, MA35_THR_REG, ch), + ({})); +} + +static void ma35d1serial_start_tx(struct uart_port *port) +{ + struct uart_ma35d1_port *up = to_ma35d1_uart_port(port); + u32 ier; + + ier = serial_in(up, MA35_IER_REG); + serial_out(up, MA35_IER_REG, ier & ~MA35_IER_THRE_IEN); + transmit_chars(up); + serial_out(up, MA35_IER_REG, ier | MA35_IER_THRE_IEN); +} + +static void ma35d1serial_stop_rx(struct uart_port *port) +{ + struct uart_ma35d1_port *up = to_ma35d1_uart_port(port); + + serial_out(up, MA35_IER_REG, serial_in(up, MA35_IER_REG) & ~MA35_IER_RDA_IEN); +} + +static void receive_chars(struct uart_ma35d1_port *up) +{ + u8 ch, flag; + u32 fsr; + int max_count = 256; + + fsr = serial_in(up, MA35_FSR_REG); + do { + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(fsr & (MA35_FSR_BIF | MA35_FSR_FEF | + MA35_FSR_PEF | MA35_FSR_RX_OVER_IF))) { + if (fsr & MA35_FSR_BIF) { + up->port.icount.brk++; + if (uart_handle_break(&up->port)) + continue; + } + if (fsr & MA35_FSR_FEF) + up->port.icount.frame++; + if (fsr & MA35_FSR_PEF) + up->port.icount.parity++; + if (fsr & MA35_FSR_RX_OVER_IF) + up->port.icount.overrun++; + + serial_out(up, MA35_FSR_REG, + fsr & (MA35_FSR_BIF | MA35_FSR_FEF | + MA35_FSR_PEF | MA35_FSR_RX_OVER_IF)); + if (fsr & MA35_FSR_BIF) + flag = TTY_BREAK; + else if (fsr & MA35_FSR_PEF) + flag = TTY_PARITY; + else if (fsr & MA35_FSR_FEF) + flag = TTY_FRAME; + } + + ch = serial_in(up, MA35_RBR_REG); + if (uart_handle_sysrq_char(&up->port, ch)) + continue; + + spin_lock(&up->port.lock); + uart_insert_char(&up->port, fsr, MA35_FSR_RX_OVER_IF, ch, flag); + spin_unlock(&up->port.lock); + + fsr = serial_in(up, MA35_FSR_REG); + } while (!(fsr & MA35_FSR_RX_EMPTY) && (max_count-- > 0)); + + spin_lock(&up->port.lock); + tty_flip_buffer_push(&up->port.state->port); + spin_unlock(&up->port.lock); +} + +static irqreturn_t ma35d1serial_interrupt(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct uart_ma35d1_port *up = to_ma35d1_uart_port(port); + u32 isr, fsr; + + isr = serial_in(up, MA35_ISR_REG); + fsr = serial_in(up, MA35_FSR_REG); + + if (!(isr & MA35_ISR_IF_CHECK)) + return IRQ_NONE; + + if (isr & (MA35_ISR_RDA_IF | MA35_ISR_RXTO_IF)) + receive_chars(up); + if (isr & MA35_ISR_THRE_INT) + transmit_chars(up); + if (fsr & MA35_FSR_TX_OVER_IF) + serial_out(up, MA35_FSR_REG, MA35_FSR_TX_OVER_IF); + + return IRQ_HANDLED; +} + +static u32 ma35d1serial_tx_empty(struct uart_port *port) +{ + struct uart_ma35d1_port *up = to_ma35d1_uart_port(port); + u32 fsr; + + fsr = serial_in(up, MA35_FSR_REG); + return (fsr & (MA35_FSR_TE_FLAG | MA35_FSR_TX_EMPTY)) == + (MA35_FSR_TE_FLAG | MA35_FSR_TX_EMPTY) ? TIOCSER_TEMT : 0; +} + +static u32 ma35d1serial_get_mctrl(struct uart_port *port) +{ + struct uart_ma35d1_port *up = to_ma35d1_uart_port(port); + u32 status; + u32 ret = 0; + + status = serial_in(up, MA35_MSR_REG); + if (!(status & MA35_MSR_CTSSTS)) + ret |= TIOCM_CTS; + return ret; +} + +static void ma35d1serial_set_mctrl(struct uart_port *port, u32 mctrl) +{ + struct uart_ma35d1_port *up = to_ma35d1_uart_port(port); + u32 mcr; + u32 ier; + + mcr = serial_in(up, MA35_MCR_REG); + mcr &= ~MA35_MCR_RTS_CTRL; + + if (mctrl & TIOCM_RTS) + mcr |= MA35_MCR_RTSACTLV; + else + mcr &= ~MA35_MCR_RTSACTLV; + + if (up->mcr & UART_MCR_AFE) { + serial_out(up, MA35_IER_REG, (serial_in(up, MA35_IER_REG) | + MA35_IER_AUTO_RTS | + MA35_IER_AUTO_CTS)); + up->port.flags |= UPF_HARD_FLOW; + } else { + ier = serial_in(up, MA35_IER_REG); + ier &= ~(MA35_IER_AUTO_RTS | MA35_IER_AUTO_CTS); + serial_out(up, MA35_IER_REG, ier); + up->port.flags &= ~UPF_HARD_FLOW; + } + serial_out(up, MA35_MSR_REG, (serial_in(up, MA35_MSR_REG) | + MA35_MSR_CTSACTLV)); + serial_out(up, MA35_MCR_REG, mcr); +} + +static void ma35d1serial_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_ma35d1_port *up = to_ma35d1_uart_port(port); + unsigned long flags; + u32 lcr; + + spin_lock_irqsave(&up->port.lock, flags); + lcr = serial_in(up, MA35_LCR_REG); + if (break_state != 0) + lcr |= MA35_LCR_BREAK; + else + lcr &= ~MA35_LCR_BREAK; + serial_out(up, MA35_LCR_REG, lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int ma35d1serial_startup(struct uart_port *port) +{ + struct uart_ma35d1_port *up = to_ma35d1_uart_port(port); + int retval; + + /* Reset FIFO */ + serial_out(up, MA35_FCR_REG, MA35_FCR_TFR | MA35_FCR_RFR); + + /* Clear pending interrupts */ + serial_out(up, MA35_ISR_REG, MA35_ISR_ALL); + + retval = request_irq(port->irq, ma35d1serial_interrupt, 0, + dev_name(port->dev), port); + if (retval) { + dev_err(up->port.dev, "request irq failed.\n"); + return retval; + } + + serial_out(up, MA35_FCR_REG, serial_in(up, MA35_FCR_REG) | + MA35_FCR_RFITL_4BYTES | MA35_FCR_RTSTL_8BYTES); + serial_out(up, MA35_LCR_REG, MA35_LCR_WLS_8BITS); + serial_out(up, MA35_TOR_REG, MA35_UART_RX_TOUT); + serial_out(up, MA35_IER_REG, MA35_IER_RTO_IEN | MA35_IER_RDA_IEN | + MA35_IER_TIME_OUT_EN | MA35_IER_BUFERR_IEN); + return 0; +} + +static void ma35d1serial_shutdown(struct uart_port *port) +{ + struct uart_ma35d1_port *up = to_ma35d1_uart_port(port); + + serial_out(up, MA35_IER_REG, 0); + free_irq(port->irq, port); +} + +static void ma35d1serial_set_termios(struct uart_port *port, + struct ktermios *termios, + const struct ktermios *old) +{ + struct uart_ma35d1_port *up = to_ma35d1_uart_port(port); + u32 lcr = 0; + unsigned long flags; + u32 baud, quot; + + lcr = UART_LCR_WLEN(tty_get_char_size(termios->c_cflag)); + + if (termios->c_cflag & CSTOPB) + lcr |= MA35_LCR_NSB; + if (termios->c_cflag & PARENB) + lcr |= MA35_LCR_PBE; + if (!(termios->c_cflag & PARODD)) + lcr |= MA35_LCR_EPE; + if (termios->c_cflag & CMSPAR) + lcr |= MA35_LCR_SPE; + + baud = uart_get_baud_rate(port, termios, old, + port->uartclk / MA35_BAUD_DIV_MAX, + port->uartclk / MA35_BAUD_DIV_MIN); + + /* MA35D1 UART baud rate equation: baudrate = UART_CLK / (quot + 2) */ + quot = (port->uartclk / baud) - 2; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + up->port.read_status_mask = MA35_FSR_RX_OVER_IF; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= MA35_FSR_FEF | MA35_FSR_PEF; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= MA35_FSR_BIF; + + /* Characteres to ignore */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= MA35_FSR_FEF | MA35_FSR_PEF; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= MA35_FSR_BIF; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= MA35_FSR_RX_OVER_IF; + } + if (termios->c_cflag & CRTSCTS) + up->mcr |= UART_MCR_AFE; + else + up->mcr &= ~UART_MCR_AFE; + + uart_update_timeout(port, termios->c_cflag, baud); + + ma35d1serial_set_mctrl(&up->port, up->port.mctrl); + + serial_out(up, MA35_BAUD_REG, MA35_BAUD_MODE2 | FIELD_PREP(MA35_BAUD_MASK, quot)); + + serial_out(up, MA35_LCR_REG, lcr); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static const char *ma35d1serial_type(struct uart_port *port) +{ + return port->type == PORT_MA35 ? "ma35d1-uart" : NULL; +} + +static void ma35d1serial_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_MA35; +} + +static int ma35d1serial_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (port->type != PORT_UNKNOWN && ser->type != PORT_MA35) + return -EINVAL; + + return 0; +} + +static const struct uart_ops ma35d1serial_ops = { + .tx_empty = ma35d1serial_tx_empty, + .set_mctrl = ma35d1serial_set_mctrl, + .get_mctrl = ma35d1serial_get_mctrl, + .stop_tx = ma35d1serial_stop_tx, + .start_tx = ma35d1serial_start_tx, + .stop_rx = ma35d1serial_stop_rx, + .break_ctl = ma35d1serial_break_ctl, + .startup = ma35d1serial_startup, + .shutdown = ma35d1serial_shutdown, + .set_termios = ma35d1serial_set_termios, + .type = ma35d1serial_type, + .config_port = ma35d1serial_config_port, + .verify_port = ma35d1serial_verify_port, +}; + +static const struct of_device_id ma35d1_serial_of_match[] = { + { .compatible = "nuvoton,ma35d1-uart" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ma35d1_serial_of_match); + +#ifdef CONFIG_SERIAL_NUVOTON_MA35D1_CONSOLE + +static struct device_node *ma35d1serial_uart_nodes[MA35_UART_NR]; + +static void wait_for_xmitr(struct uart_ma35d1_port *up) +{ + unsigned int tmout; + + /* Wait up to 10ms for the character(s) to be sent. */ + tmout = 10000; + while (--tmout) { + if (serial_in(up, MA35_FSR_REG) & MA35_FSR_TX_EMPTY) + break; + udelay(1); + } +} + +static void ma35d1serial_console_putchar(struct uart_port *port, unsigned char ch) +{ + struct uart_ma35d1_port *up = to_ma35d1_uart_port(port); + + wait_for_xmitr(up); + serial_out(up, MA35_THR_REG, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void ma35d1serial_console_write(struct console *co, const char *s, u32 count) +{ + struct uart_ma35d1_port *up = &ma35d1serial_ports[co->index]; + unsigned long flags; + int locked = 1; + u32 ier; + + if (up->port.sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock_irqsave(&up->port.lock, flags); + else + spin_lock_irqsave(&up->port.lock, flags); + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, MA35_IER_REG); + serial_out(up, MA35_IER_REG, 0); + + uart_console_write(&up->port, s, count, ma35d1serial_console_putchar); + + wait_for_xmitr(up); + serial_out(up, MA35_IER_REG, ier); + + if (locked) + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int __init ma35d1serial_console_setup(struct console *co, char *options) +{ + struct device_node *np; + struct uart_ma35d1_port *p; + u32 val32[4]; + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if ((co->index < 0) || (co->index >= MA35_UART_NR)) { + pr_debug("Console Port%x out of range\n", co->index); + return -EINVAL; + } + + np = ma35d1serial_uart_nodes[co->index]; + p = &ma35d1serial_ports[co->index]; + if (!np || !p) + return -ENODEV; + + if (of_property_read_u32_array(np, "reg", val32, ARRAY_SIZE(val32)) != 0) + return -EINVAL; + + p->port.iobase = val32[1]; + p->port.membase = ioremap(p->port.iobase, MA35_UART_REG_SIZE); + if (!p->port.membase) + return -ENOMEM; + + p->port.ops = &ma35d1serial_ops; + p->port.line = 0; + p->port.uartclk = MA35_UART_CONSOLE_CLK; + + port = &ma35d1serial_ports[co->index].port; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct console ma35d1serial_console = { + .name = "ttyNVT", + .write = ma35d1serial_console_write, + .device = uart_console_device, + .setup = ma35d1serial_console_setup, + .flags = CON_PRINTBUFFER | CON_ENABLED, + .index = -1, + .data = &ma35d1serial_reg, +}; + +static void ma35d1serial_console_init_port(void) +{ + u32 i = 0; + struct device_node *np; + + for_each_matching_node(np, ma35d1_serial_of_match) { + if (ma35d1serial_uart_nodes[i] == NULL) { + of_node_get(np); + ma35d1serial_uart_nodes[i] = np; + i++; + if (i == MA35_UART_NR) + break; + } + } +} + +static int __init ma35d1serial_console_init(void) +{ + ma35d1serial_console_init_port(); + register_console(&ma35d1serial_console); + return 0; +} +console_initcall(ma35d1serial_console_init); + +#define MA35D1SERIAL_CONSOLE (&ma35d1serial_console) +#else +#define MA35D1SERIAL_CONSOLE NULL +#endif + +static struct uart_driver ma35d1serial_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyNVT", + .major = TTY_MAJOR, + .minor = 64, + .cons = MA35D1SERIAL_CONSOLE, + .nr = MA35_UART_NR, +}; + +/* + * Register a set of serial devices attached to a platform device. + * The list is terminated with a zero flags entry, which means we expect + * all entries to have at least UPF_BOOT_AUTOCONF set. + */ +static int ma35d1serial_probe(struct platform_device *pdev) +{ + struct resource *res_mem; + struct uart_ma35d1_port *up; + int ret = 0; + + if (pdev->dev.of_node) { + ret = of_alias_get_id(pdev->dev.of_node, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n", ret); + return ret; + } + } + up = &ma35d1serial_ports[ret]; + up->port.line = ret; + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_mem) + return -ENODEV; + + up->port.iobase = res_mem->start; + up->port.membase = ioremap(up->port.iobase, MA35_UART_REG_SIZE); + up->port.ops = &ma35d1serial_ops; + + spin_lock_init(&up->port.lock); + + up->clk = of_clk_get(pdev->dev.of_node, 0); + if (IS_ERR(up->clk)) { + ret = PTR_ERR(up->clk); + dev_err(&pdev->dev, "failed to get core clk: %d\n", ret); + goto err_iounmap; + } + + ret = clk_prepare_enable(up->clk); + if (ret) + goto err_iounmap; + + if (up->port.line != 0) + up->port.uartclk = clk_get_rate(up->clk); + + ret = platform_get_irq(pdev, 0); + if (ret < 0) + goto err_clk_disable; + + up->port.irq = ret; + up->port.dev = &pdev->dev; + up->port.flags = UPF_BOOT_AUTOCONF; + + platform_set_drvdata(pdev, up); + + ret = uart_add_one_port(&ma35d1serial_reg, &up->port); + if (ret < 0) + goto err_free_irq; + + return 0; + +err_free_irq: + free_irq(up->port.irq, &up->port); + +err_clk_disable: + clk_disable_unprepare(up->clk); + +err_iounmap: + iounmap(up->port.membase); + return ret; +} + +/* + * Remove serial ports registered against a platform device. + */ +static int ma35d1serial_remove(struct platform_device *dev) +{ + struct uart_port *port = platform_get_drvdata(dev); + struct uart_ma35d1_port *up = to_ma35d1_uart_port(port); + + uart_remove_one_port(&ma35d1serial_reg, port); + clk_disable_unprepare(up->clk); + return 0; +} + +static int ma35d1serial_suspend(struct platform_device *dev, pm_message_t state) +{ + struct uart_port *port = platform_get_drvdata(dev); + struct uart_ma35d1_port *up = to_ma35d1_uart_port(port); + + uart_suspend_port(&ma35d1serial_reg, &up->port); + if (up->port.line == 0) { + up->console_baud_rate = serial_in(up, MA35_BAUD_REG); + up->console_line = serial_in(up, MA35_LCR_REG); + up->console_int = serial_in(up, MA35_IER_REG); + } + return 0; +} + +static int ma35d1serial_resume(struct platform_device *dev) +{ + struct uart_port *port = platform_get_drvdata(dev); + struct uart_ma35d1_port *up = to_ma35d1_uart_port(port); + + if (up->port.line == 0) { + serial_out(up, MA35_BAUD_REG, up->console_baud_rate); + serial_out(up, MA35_LCR_REG, up->console_line); + serial_out(up, MA35_IER_REG, up->console_int); + } + uart_resume_port(&ma35d1serial_reg, &up->port); + return 0; +} + +static struct platform_driver ma35d1serial_driver = { + .probe = ma35d1serial_probe, + .remove = ma35d1serial_remove, + .suspend = ma35d1serial_suspend, + .resume = ma35d1serial_resume, + .driver = { + .name = "ma35d1-uart", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(ma35d1_serial_of_match), + }, +}; + +static int __init ma35d1serial_init(void) +{ + int ret; + + ret = uart_register_driver(&ma35d1serial_reg); + if (ret) + return ret; + + ret = platform_driver_register(&ma35d1serial_driver); + if (ret) + uart_unregister_driver(&ma35d1serial_reg); + + return ret; +} + +static void __exit ma35d1serial_exit(void) +{ + platform_driver_unregister(&ma35d1serial_driver); + uart_unregister_driver(&ma35d1serial_reg); +} + +module_init(ma35d1serial_init); +module_exit(ma35d1serial_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MA35D1 serial driver"); diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 281fa286555c..c11600bb1b0d 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -279,4 +279,7 @@ /* Sunplus UART */ #define PORT_SUNPLUS 123 +/* Nuvoton MA35 SoC */ +#define PORT_MA35 124 + #endif /* _UAPILINUX_SERIAL_CORE_H */