From patchwork Thu Jun 1 20:18:40 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hugo Villeneuve X-Patchwork-Id: 688429 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7E5C3C7EE29 for ; Thu, 1 Jun 2023 20:19:25 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231162AbjFAUTY (ORCPT ); Thu, 1 Jun 2023 16:19:24 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48342 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231926AbjFAUTF (ORCPT ); Thu, 1 Jun 2023 16:19:05 -0400 Received: from mail.hugovil.com (mail.hugovil.com [162.243.120.170]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 192FF198; Thu, 1 Jun 2023 13:19:04 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=hugovil.com ; s=x; h=Subject:Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-Id:Date:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=hEflR0XEH91vm7nnoLolEjlsR6byylaX01ee4kA2NTI=; b=spAxrHkv2w5dfiy7LfhQd6dwyt eUgqDoFFlZpfZCqRS21GV4ZFuvfCdgdiKIWKMHWryWoR4y2p5aW0UuBurzaVeYEVvbeUan2zV9IBl iodwQYZXy9S9sYqJ1oMssFUNDG7y2szWrU9ZqoU/0rBNa78Wclb5vXMXwmd3RIRAN3iE=; Received: from modemcable168.174-80-70.mc.videotron.ca ([70.80.174.168]:39204 helo=pettiford.lan) by mail.hugovil.com with esmtpa (Exim 4.92) (envelope-from ) id 1q4ol4-000686-Eg; Thu, 01 Jun 2023 16:18:55 -0400 From: Hugo Villeneuve To: gregkh@linuxfoundation.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, jirislaby@kernel.org, jringle@gridpoint.com, tomasz.mon@camlingroup.com, l.perczak@camlintechnologies.com Cc: linux-serial@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, hugo@hugovil.com, linux-gpio@vger.kernel.org, Hugo Villeneuve , stable@vger.kernel.org Date: Thu, 1 Jun 2023 16:18:40 -0400 Message-Id: <20230601201844.3739926-6-hugo@hugovil.com> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20230601201844.3739926-1-hugo@hugovil.com> References: <20230601201844.3739926-1-hugo@hugovil.com> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 70.80.174.168 X-SA-Exim-Mail-From: hugo@hugovil.com Subject: [PATCH v6 5/9] serial: sc16is7xx: fix regression with GPIO configuration X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on mail.hugovil.com) Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Hugo Villeneuve Commit 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines") and commit 21144bab4f11 ("sc16is7xx: Handle modem status lines") changed the function of the GPIOs pins to act as modem control lines without any possibility of selecting GPIO function. As a consequence, applications that depends on GPIO lines configured by default as GPIO pins no longer work as expected. Also, the change to select modem control lines function was done only for channel A of dual UART variants (752/762). This was not documented in the log message. Allow to specify GPIO or modem control line function in the device tree, and for each of the ports (A or B). Do so by using the new device-tree property named "modem-control-line-ports" (property added in separate patch). When registering GPIO chip controller, mask-out GPIO pins declared as modem control lines according to this new "modem-control-line-ports" DT property. Boards that need to have GPIOS configured as modem control lines should add that property to their device tree. Here is a list of boards using the sc16is7xx driver in their device tree and that may need to be modified: arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts mips/boot/dts/ingenic/cu1830-neo.dts mips/boot/dts/ingenic/cu1000-neo.dts Fixes: 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines") Fixes: 21144bab4f11 ("sc16is7xx: Handle modem status lines") Cc: # 6.1.x: 35210b22 dt-bindings: sc16is7xx: Add property to change GPIO function Cc: # 6.1.x: 7d61ca47 serial: sc16is7xx: refactor GPIO controller registration Cc: # 6.1.x: 322470ed serial: sc16is7xx: mark IOCONTROL register as volatile Cc: # 6.1.x: a0077362 serial: sc16is7xx: fix broken port 0 uart init Cc: # 6.1.x Signed-off-by: Hugo Villeneuve --- drivers/tty/serial/sc16is7xx.c | 102 ++++++++++++++++++++++++++------- 1 file changed, 81 insertions(+), 21 deletions(-) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 7d50674d2d0e..ad6b9d613b33 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -236,7 +236,8 @@ /* IOControl register bits (Only 750/760) */ #define SC16IS7XX_IOCONTROL_LATCH_BIT (1 << 0) /* Enable input latching */ -#define SC16IS7XX_IOCONTROL_MODEM_BIT (1 << 1) /* Enable GPIO[7:4] as modem pins */ +#define SC16IS7XX_IOCONTROL_MODEM_A_BIT (1 << 1) /* Enable GPIO[7:4] as modem A pins */ +#define SC16IS7XX_IOCONTROL_MODEM_B_BIT (1 << 2) /* Enable GPIO[3:0] as modem B pins */ #define SC16IS7XX_IOCONTROL_SRESET_BIT (1 << 3) /* Software Reset */ /* EFCR register bits */ @@ -301,12 +302,12 @@ /* Misc definitions */ #define SC16IS7XX_FIFO_SIZE (64) #define SC16IS7XX_REG_SHIFT 2 +#define SC16IS7XX_GPIOS_PER_BANK 4 struct sc16is7xx_devtype { char name[10]; int nr_gpio; int nr_uart; - int has_mctrl; }; #define SC16IS7XX_RECONF_MD (1 << 0) @@ -336,6 +337,7 @@ struct sc16is7xx_port { struct clk *clk; #ifdef CONFIG_GPIOLIB struct gpio_chip gpio; + unsigned long gpio_valid_mask; #endif unsigned char buf[SC16IS7XX_FIFO_SIZE]; struct kthread_worker kworker; @@ -447,35 +449,30 @@ static const struct sc16is7xx_devtype sc16is74x_devtype = { .name = "SC16IS74X", .nr_gpio = 0, .nr_uart = 1, - .has_mctrl = 0, }; static const struct sc16is7xx_devtype sc16is750_devtype = { .name = "SC16IS750", - .nr_gpio = 4, + .nr_gpio = 8, .nr_uart = 1, - .has_mctrl = 1, }; static const struct sc16is7xx_devtype sc16is752_devtype = { .name = "SC16IS752", - .nr_gpio = 0, + .nr_gpio = 8, .nr_uart = 2, - .has_mctrl = 1, }; static const struct sc16is7xx_devtype sc16is760_devtype = { .name = "SC16IS760", - .nr_gpio = 4, + .nr_gpio = 8, .nr_uart = 1, - .has_mctrl = 1, }; static const struct sc16is7xx_devtype sc16is762_devtype = { .name = "SC16IS762", - .nr_gpio = 0, + .nr_gpio = 8, .nr_uart = 2, - .has_mctrl = 1, }; static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg) @@ -1350,16 +1347,45 @@ static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip, return 0; } -static int sc16is7xx_setup_gpio_chip(struct device *dev) +static int sc16is7xx_gpio_init_valid_mask(struct gpio_chip *chip, + unsigned long *valid_mask, + unsigned int ngpios) +{ + struct sc16is7xx_port *s = gpiochip_get_data(chip); + + *valid_mask = s->gpio_valid_mask; + + return 0; +} + +static int sc16is7xx_setup_gpio_chip(struct device *dev, u8 mctrl_mask) { struct sc16is7xx_port *s = dev_get_drvdata(dev); if (!s->devtype->nr_gpio) return 0; + switch (mctrl_mask) { + case 0: + s->gpio_valid_mask = GENMASK(7, 0); + break; + case SC16IS7XX_IOCONTROL_MODEM_A_BIT: + s->gpio_valid_mask = GENMASK(3, 0); + break; + case SC16IS7XX_IOCONTROL_MODEM_B_BIT: + s->gpio_valid_mask = GENMASK(7, 4); + break; + default: + break; + } + + if (!s->gpio_valid_mask) + return 0; + s->gpio.owner = THIS_MODULE; s->gpio.parent = dev; s->gpio.label = dev_name(dev); + s->gpio.init_valid_mask = sc16is7xx_gpio_init_valid_mask; s->gpio.direction_input = sc16is7xx_gpio_direction_input; s->gpio.get = sc16is7xx_gpio_get; s->gpio.direction_output = sc16is7xx_gpio_direction_output; @@ -1371,6 +1397,43 @@ static int sc16is7xx_setup_gpio_chip(struct device *dev) } #endif +static int sc16is7xx_setup_mctrl_ports(struct device *dev) +{ + struct sc16is7xx_port *s = dev_get_drvdata(dev); + int i; + int ret; + int count; + u32 mctrl_port[2]; + u8 mctrl_mask = 0; + + count = device_property_count_u32(dev, "nxp,modem-control-line-ports"); + if (count < 0 || count > ARRAY_SIZE(mctrl_port)) + return mctrl_mask; + + ret = device_property_read_u32_array(dev, "nxp,modem-control-line-ports", + mctrl_port, count); + if (ret) + return mctrl_mask; + + for (i = 0; i < count; i++) { + /* Use GPIO lines as modem control lines */ + if (mctrl_port[i] == 0) + mctrl_mask |= SC16IS7XX_IOCONTROL_MODEM_A_BIT; + else if (mctrl_port[i] == 1) + mctrl_mask |= SC16IS7XX_IOCONTROL_MODEM_B_BIT; + } + + if (!mctrl_mask) + return mctrl_mask; + + regmap_update_bits(s->regmap, + SC16IS7XX_IOCONTROL_REG << SC16IS7XX_REG_SHIFT, + SC16IS7XX_IOCONTROL_MODEM_A_BIT | + SC16IS7XX_IOCONTROL_MODEM_B_BIT, mctrl_mask); + + return mctrl_mask; +} + static const struct serial_rs485 sc16is7xx_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_AFTER_SEND, .delay_rts_before_send = 1, @@ -1383,6 +1446,7 @@ static int sc16is7xx_probe(struct device *dev, { unsigned long freq = 0, *pfreq = dev_get_platdata(dev); unsigned int val; + u8 mctrl_mask = 0; u32 uartclk = 0; int i, ret; struct sc16is7xx_port *s; @@ -1478,12 +1542,6 @@ static int sc16is7xx_probe(struct device *dev, SC16IS7XX_EFCR_RXDISABLE_BIT | SC16IS7XX_EFCR_TXDISABLE_BIT); - /* Use GPIO lines as modem status registers */ - if (devtype->has_mctrl) - sc16is7xx_port_write(&s->p[i].port, - SC16IS7XX_IOCONTROL_REG, - SC16IS7XX_IOCONTROL_MODEM_BIT); - /* Initialize kthread work structs */ kthread_init_work(&s->p[i].tx_work, sc16is7xx_tx_proc); kthread_init_work(&s->p[i].reg_work, sc16is7xx_reg_proc); @@ -1521,8 +1579,10 @@ static int sc16is7xx_probe(struct device *dev, s->p[u].irda_mode = true; } + mctrl_mask = sc16is7xx_setup_mctrl_ports(dev); + #ifdef CONFIG_GPIOLIB - ret = sc16is7xx_setup_gpio_chip(dev); + ret = sc16is7xx_setup_gpio_chip(dev, mctrl_mask); if (ret) goto out_thread; #endif @@ -1547,7 +1607,7 @@ static int sc16is7xx_probe(struct device *dev, return 0; #ifdef CONFIG_GPIOLIB - if (devtype->nr_gpio) + if (s->gpio_valid_mask) gpiochip_remove(&s->gpio); out_thread: @@ -1573,7 +1633,7 @@ static void sc16is7xx_remove(struct device *dev) int i; #ifdef CONFIG_GPIOLIB - if (s->devtype->nr_gpio) + if (s->gpio_valid_mask) gpiochip_remove(&s->gpio); #endif