diff mbox series

[2/2] arm64: dts: ti: k3-am62-main: add sa3_secproxy in cbass_main

Message ID 20230510123216.3440019-3-n-yadav@ti.com
State New
Headers show
Series [1/2] arm64: dts: ti: k3-am62x-sk-common: Add main_uart1 and wkup_uart nodes | expand

Commit Message

Nitin Yadav May 10, 2023, 12:32 p.m. UTC
Add sa3_secproxy node in k3-am62-main.dtsi to keep device tree
nodes in sync with u-boot nodes.

Signed-off-by: Nitin Yadav <n-yadav@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Nishanth Menon May 15, 2023, 2:32 p.m. UTC | #1
On 18:02-20230510, Nitin Yadav wrote:
> Add sa3_secproxy node in k3-am62-main.dtsi to keep device tree
> nodes in sync with u-boot nodes.
> 
> Signed-off-by: Nitin Yadav <n-yadav@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> index b3e4857bbbe4..7c2af5b0e022 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> @@ -42,6 +42,15 @@ gic_its: msi-controller@1820000 {
>  		};
>  	};
>  
> +	sa3_secproxy: secproxy@44880000 {
> +		compatible = "ti,am654-secure-proxy";
> +		#mbox-cells = <1>;
> +		reg-names = "rt", "scfg", "target_data";
> +		reg = <0x00 0x44880000 0x00 0x20000>,
> +		      <0x0 0x44860000 0x0 0x20000>,
> +		      <0x0 0x43600000 0x0 0x10000>;
be consistent with 0x00 instead of 0x0

You want this marked reserved and documented since it is to be used only by HSM
processors and NOT general processors.

> +	};
> +
>  	main_conf: syscon@100000 {
>  		compatible = "syscon", "simple-mfd";
>  		reg = <0x00 0x00100000 0x00 0x20000>;
> -- 
> 2.25.1
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index b3e4857bbbe4..7c2af5b0e022 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -42,6 +42,15 @@  gic_its: msi-controller@1820000 {
 		};
 	};
 
+	sa3_secproxy: secproxy@44880000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "rt", "scfg", "target_data";
+		reg = <0x00 0x44880000 0x00 0x20000>,
+		      <0x0 0x44860000 0x0 0x20000>,
+		      <0x0 0x43600000 0x0 0x10000>;
+	};
+
 	main_conf: syscon@100000 {
 		compatible = "syscon", "simple-mfd";
 		reg = <0x00 0x00100000 0x00 0x20000>;