diff mbox series

[v6,08/13] arm64: dts: qcom: sm8250: Define ports for qmpphy orientation-switching

Message ID 20230501121111.1058190-9-bryan.odonoghue@linaro.org
State Superseded
Headers show
Series [v6,01/13] dt-bindings: regulator: qcom,usb-vbus-regulator: Mark reg as required | expand

Commit Message

Bryan O'Donoghue May 1, 2023, 12:11 p.m. UTC
ports for orientation switching input and output. The individual board dts
files will instantiate port@0 and port@1 depending on the supported
feature-set.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

Comments

Konrad Dybcio May 2, 2023, 11:01 a.m. UTC | #1
On 1.05.2023 14:11, Bryan O'Donoghue wrote:
> ports for orientation switching input and output. The individual board dts
> files will instantiate port@0 and port@1 depending on the supported
> feature-set.
> 
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm8250.dtsi | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index a91d1175255e8..af16d3ba76b8e 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -3581,6 +3581,19 @@ dp_phy: dp-phy@88ea200 {
>  				#phy-cells = <0>;
>  				#clock-cells = <1>;
>  			};
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +				};
> +
> +				port@1 {
> +					reg = <1>;
> +				};
> +			};
>  		};
>  
>  		usb_2_qmpphy: phy@88eb000 {
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index a91d1175255e8..af16d3ba76b8e 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3581,6 +3581,19 @@  dp_phy: dp-phy@88ea200 {
 				#phy-cells = <0>;
 				#clock-cells = <1>;
 			};
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
 		};
 
 		usb_2_qmpphy: phy@88eb000 {