From patchwork Thu Apr 13 19:15:41 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andrew Halaney X-Patchwork-Id: 672901 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id AEC51C77B71 for ; Thu, 13 Apr 2023 19:17:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230033AbjDMTRh (ORCPT ); Thu, 13 Apr 2023 15:17:37 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:55866 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229689AbjDMTR3 (ORCPT ); Thu, 13 Apr 2023 15:17:29 -0400 Received: from us-smtp-delivery-124.mimecast.com (us-smtp-delivery-124.mimecast.com [170.10.133.124]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B6052869A for ; Thu, 13 Apr 2023 12:15:58 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=redhat.com; s=mimecast20190719; t=1681413358; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=xTgGczCO0mNwpgaEE0ax8YC4P9ZUQjVz+mrfnTw0NtY=; b=HY3EpJoztDfFOaolJ940Vs7kk9o2s8euVrXVmsYu1IWQ74Ca+iNJ4d2iFAztGDE2aIY17p PXQylC6ZNX8VTt+8mfH9o9FCtKC2aTi5uWzTkCaZPq5qGP5lXqteb9nKXweUl5Im59eHQ4 +8E1HbOtfr5UCtPmsdkwb92mV3xmQwA= Received: from mail-yw1-f197.google.com (mail-yw1-f197.google.com [209.85.128.197]) by relay.mimecast.com with ESMTP with STARTTLS (version=TLSv1.3, cipher=TLS_AES_256_GCM_SHA384) id us-mta-186-1sUrRELSNt28gktAxOrbGw-1; Thu, 13 Apr 2023 15:15:56 -0400 X-MC-Unique: 1sUrRELSNt28gktAxOrbGw-1 Received: by mail-yw1-f197.google.com with SMTP id 00721157ae682-54f89e7de94so73674077b3.17 for ; Thu, 13 Apr 2023 12:15:56 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1681413355; x=1684005355; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=xTgGczCO0mNwpgaEE0ax8YC4P9ZUQjVz+mrfnTw0NtY=; b=M9xveLsvbyl2h/O1BnUCKRGAjB6niLtLv41Ca0vaJxIiD7FgvJSiwtI5l3XWmojC1a VTmbYuxjZlo2jwU28Y2EYeaYpGE89l1nfOHsWYgcDzr1HuJgF7Juty3JMLpFjzdPHHgu ylzhuJopb+giJJ9HbRkhtJTqC8otqv/pKVFXUVPT2HnmsTPbwbrdK/2KnAYwD/SqLxEo ybwlHM4l5wFqpXcz/YNqu8F1NTx7vc+ITAnMqgDU+yI7P/DSNCzB04743AFXWb6jraa7 Kpn5ZWZ1kX0FHYZ1NDrjMGwDKH6K8WIhCGKHTj2l06kunmyq0vW85wA+8c7pnLOl0ClG MH+w== X-Gm-Message-State: AAQBX9dM1p8NEncYviPXi3NK+1WAT7rj4Eo/J33hxaBesvWngk/vfOZm LszagSge3SZlHluIiMb/MQd3N3t+NKD7pgay6cEc4TKTLbN5N5Ur4qh2U9NjLR3M2zLxIUSVMok qJDyQutiZl73iPSrROi34X0nLXY591Q== X-Received: by 2002:a81:4810:0:b0:536:3451:b2ab with SMTP id v16-20020a814810000000b005363451b2abmr2997373ywa.51.1681413355407; Thu, 13 Apr 2023 12:15:55 -0700 (PDT) X-Google-Smtp-Source: AKy350Z+kPXa1HPrZbBVBQ9Hvi0ho/p670nRIUBtqxHPLoBYgdWfhEUIgtsd9juVQgyaVIGCkR8Wyw== X-Received: by 2002:a81:4810:0:b0:536:3451:b2ab with SMTP id v16-20020a814810000000b005363451b2abmr2997349ywa.51.1681413355120; Thu, 13 Apr 2023 12:15:55 -0700 (PDT) Received: from halaney-x13s.redhat.com (104-53-165-62.lightspeed.stlsmo.sbcglobal.net. [104.53.165.62]) by smtp.gmail.com with ESMTPSA id t11-20020a81780b000000b00545a4ec318dsm673203ywc.13.2023.04.13.12.15.54 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 13 Apr 2023 12:15:54 -0700 (PDT) From: Andrew Halaney To: linux-kernel@vger.kernel.org Cc: agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, mturquette@baylibre.com, sboyd@kernel.org, richardcochran@gmail.com, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-clk@vger.kernel.org, netdev@vger.kernel.org, bmasney@redhat.com, echanude@redhat.com, ncai@quicinc.com, jsuraj@qti.qualcomm.com, hisunil@quicinc.com, Andrew Halaney Subject: [PATCH v5 3/3] arm64: dts: qcom: sa8540p-ride: Add ethernet nodes Date: Thu, 13 Apr 2023 14:15:41 -0500 Message-Id: <20230413191541.1073027-4-ahalaney@redhat.com> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20230413191541.1073027-1-ahalaney@redhat.com> References: <20230413191541.1073027-1-ahalaney@redhat.com> MIME-Version: 1.0 Content-type: text/plain Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Enable both the MACs found on the board. ethernet0 and ethernet1 both ultimately go to a series of on board switches which aren't managed by this processor. ethernet0 is connected to a Marvell 88EA1512 phy via RGMII. That goes to the series of switches via SGMII on the "media" side of the phy. RGMII_SGMII mode is enabled via devicetree register descriptions. The switch on the "media" side has auto-negotiation disabled, so configuration from userspace similar to: ethtool -s eth0 autoneg off speed 1000 duplex full is necessary to get traffic flowing on that interface. ethernet1 is in a mac2mac/fixed-link configuration going to the same series of switches directly via RGMII. Tested-by: Brian Masney Signed-off-by: Andrew Halaney --- This patch is why there's a v5, I couldn't ignore the needless interrupts-parent Konrad pointed out in the sa8155-adp.dts over at: https://lore.kernel.org/linux-arm-msm/88d41729-86be-95cb-2fda-1b809f07ed6b@linaro.org/ Changes since v4: * Remove needless interrupt-parent (Konrad) * Add Tested-by (Brian) Changes since v3: * Compatible goes first in node (Krzysztof) Changes since v1 and v2: * None arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 179 ++++++++++++++++++++++ 1 file changed, 179 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts index 40db5aa0803c..650cd54f418e 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts @@ -28,6 +28,65 @@ aliases { chosen { stdout-path = "serial0:115200n8"; }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; }; &apps_rsc { @@ -151,6 +210,66 @@ vreg_l8g: ldo8 { }; }; +ðernet0 { + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + + max-speed = <1000>; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii-txid"; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet0_default>; + + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* Marvell 88EA1512 */ + rgmii_phy: phy@8 { + reg = <0x8>; + + interrupts-extended = <&tlmm 127 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&pmm8540c_gpios 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + + device_type = "ethernet-phy"; + + /* Set to RGMII_SGMII mode and soft reset. Turn off auto-negotiation + * from userspace to talk to the switch on the SGMII side of things + */ + marvell,reg-init = + /* Set MODE[2:0] to RGMII_SGMII */ + <0x12 0x14 0xfff8 0x4>, + /* Soft reset required after changing MODE[2:0] */ + <0x12 0x14 0x7fff 0x8000>; + }; + }; +}; + +ðernet1 { + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + + max-speed = <1000>; + phy-mode = "rgmii-txid"; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet1_default>; + + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_default>; @@ -316,6 +435,66 @@ &xo_board_clk { /* PINCTRL */ &tlmm { + ethernet0_default: ethernet0-default-state { + mdc-pins { + pins = "gpio175"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + mdio-pins { + pins = "gpio176"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-tx-pins { + pins = "gpio183", "gpio184", "gpio185", "gpio186", "gpio187", "gpio188"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-rx-pins { + pins = "gpio177", "gpio178", "gpio179", "gpio180", "gpio181", "gpio182"; + function = "rgmii_0"; + drive-strength = <16>; + bias-disable; + }; + }; + + ethernet1_default: ethernet1-default-state { + mdc-pins { + pins = "gpio97"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + mdio-pins { + pins = "gpio98"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-tx-pins { + pins = "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-rx-pins { + pins = "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104"; + function = "rgmii_1"; + drive-strength = <16>; + bias-disable; + }; + }; + i2c0_default: i2c0-default-state { /* To USB7002T-I/KDXVA0 USB hub (SIP1 only) */ pins = "gpio135", "gpio136";