From patchwork Thu Mar 30 11:05:12 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Keguang Zhang X-Patchwork-Id: 669235 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 2DA6CC6FD1D for ; Thu, 30 Mar 2023 11:06:07 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231330AbjC3LGG (ORCPT ); Thu, 30 Mar 2023 07:06:06 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38560 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231470AbjC3LF7 (ORCPT ); Thu, 30 Mar 2023 07:05:59 -0400 Received: from mail-pf1-x42e.google.com (mail-pf1-x42e.google.com [IPv6:2607:f8b0:4864:20::42e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 412659751; Thu, 30 Mar 2023 04:05:50 -0700 (PDT) Received: by mail-pf1-x42e.google.com with SMTP id fb38so12231551pfb.7; Thu, 30 Mar 2023 04:05:50 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; t=1680174349; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=Qxut/AsnzaOVHLVfLG9cZIcxWQMeZIsrKH2tQ3zuISU=; b=GqhcBWhadv+RzcVGMGPIE9NtIarByT0+YT+W9w+9JZJx8tfhzbNAJ+zGzTTxjYlngb 8SV62RhAuaDvo9cia2tjlYgnsgtvnNOPZWlMy+dbgNfasqSX4Zj+/9Mjb0oRYJ7aMObI RaBUUIvjaRrEdhfF7Pv7QrTiIwz+6aBVJ9GTCQDnNPz/0w7YmcJCr/XGfDkzC5tANp1E w8dkkCOOpSaQ6tOkSq74uWQWHN+mwQn2+NqgUWE9Y7SD69XJ3mKlubnFrmRbar0c/mRT 3H9rmvK8r/xsIeCg2ztm/vgldsZy+dz7ZFaKicrNqF2y7E7I+KNunV/XMDOBrrC+JcA5 AIFQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1680174349; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=Qxut/AsnzaOVHLVfLG9cZIcxWQMeZIsrKH2tQ3zuISU=; b=Jg1U/upJ0uFFUvieZx4wrtPKO0cloK0y1LW/n7ZppK++ZC2OM+4Hr0IFPkZuecoYA0 w45gN8DetmQl26VK7Df1RKPezV0ewLCI93abFdD/zhpG3Ptgwwu1GumpxTA+Q7xfDBWH EqSnn8ClWQwGQYo7djGkPg5jOX62+Vl93ZwpA8hapys9pUZxLUjawWFyV8bzhOnceGtp yp7slNAD43SnJ6KLte79h3tygGJr0C8FzFoutpcWcY3whBSLYKYt97ivhrLz58Bil3Yd 34l9sRbNnZeRgdSGlUffJmB5CJICQNwmBRr+zWngAtwjcD1zoWHlBJ52NNcPVcYF4P4T rDaA== X-Gm-Message-State: AAQBX9eiQLAXhaXRr2I0wY8hhTgZU/7b40tmXCKnKGE+a8ULYiSW7III u/nosEdH3AloFdAGmMJ75YBK/uNwQAOwBw== X-Google-Smtp-Source: AKy350Zt/SZ0TwPYhoOP+IF3VGd3q7cEL6rcST556jNWv5euDr8KLJD0FoIIvN5SOHWtN0YFMdCIfQ== X-Received: by 2002:a62:790e:0:b0:5f1:f57a:b0c3 with SMTP id u14-20020a62790e000000b005f1f57ab0c3mr24047332pfc.5.1680174349269; Thu, 30 Mar 2023 04:05:49 -0700 (PDT) Received: from kelvin-ThinkPad-L14-Gen-1.. (94.130.220.35.bc.googleusercontent.com. [35.220.130.94]) by smtp.gmail.com with ESMTPSA id r1-20020a62e401000000b005e4c3e2022fsm24670922pfh.72.2023.03.30.04.05.45 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 30 Mar 2023 04:05:48 -0700 (PDT) From: Keguang Zhang To: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-mips@vger.kernel.org Cc: Daniel Lezcano , Thomas Gleixner , Rob Herring , Krzysztof Kozlowski , Thomas Bogendoerfer , Stephen Boyd , Keguang Zhang Subject: [PATCH v3 3/3] clocksource: loongson1: Move PWM timer to clocksource framework Date: Thu, 30 Mar 2023 19:05:12 +0800 Message-Id: <20230330110512.549704-4-keguang.zhang@gmail.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230330110512.549704-1-keguang.zhang@gmail.com> References: <20230330110512.549704-1-keguang.zhang@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org This patch moves most part of arch/mips/loongson32/common/time.c into drivers/clocksource. Adapt the driver to clocksource framework and updates the Kconfig/Makefile options. Signed-off-by: Keguang Zhang --- V2 -> V3: None V1 -> V2: None --- drivers/clocksource/Kconfig | 9 + drivers/clocksource/Makefile | 1 + drivers/clocksource/timer-loongson1-pwm.c | 236 ++++++++++++++++++++++ 3 files changed, 246 insertions(+) create mode 100644 drivers/clocksource/timer-loongson1-pwm.c diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 5fc8f0e7fb38..6e37b26d532d 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -603,6 +603,15 @@ config TIMER_IMX_SYS_CTR Enable this option to use i.MX system counter timer as a clockevent. +config CLKSRC_LOONGSON1_PWM + bool "Clocksource using Loongson1 PWM" + depends on MACH_LOONGSON32 || COMPILE_TEST + select MIPS_EXTERNAL_TIMER + select TIMER_OF + help + Enable this option to use Loongson1 PWM timer as clocksource + instead of the performance counter. + config CLKSRC_ST_LPC bool "Low power clocksource found in the LPC" if COMPILE_TEST select TIMER_OF if OF diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 64ab547de97b..f969a9eedfca 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -88,3 +88,4 @@ obj-$(CONFIG_MICROCHIP_PIT64B) += timer-microchip-pit64b.o obj-$(CONFIG_MSC313E_TIMER) += timer-msc313e.o obj-$(CONFIG_GOLDFISH_TIMER) += timer-goldfish.o obj-$(CONFIG_GXP_TIMER) += timer-gxp.o +obj-$(CONFIG_CLKSRC_LOONGSON1_PWM) += timer-loongson1-pwm.o diff --git a/drivers/clocksource/timer-loongson1-pwm.c b/drivers/clocksource/timer-loongson1-pwm.c new file mode 100644 index 000000000000..fe94c08afce2 --- /dev/null +++ b/drivers/clocksource/timer-loongson1-pwm.c @@ -0,0 +1,236 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Clocksource driver for Loongson-1 SoC + * + * Copyright (c) 2023 Keguang Zhang + */ + +#include +#include +#include +#include "timer-of.h" + +/* Loongson-1 PWM Timer Register Definitions */ +#define PWM_CNTR 0x0 +#define PWM_HRC 0x4 +#define PWM_LRC 0x8 +#define PWM_CTRL 0xc + +/* PWM Control Register Bits */ +#define INT_LRC_EN BIT(11) +#define INT_HRC_EN BIT(10) +#define CNTR_RST BIT(7) +#define INT_SR BIT(6) +#define INT_EN BIT(5) +#define PWM_SINGLE BIT(4) +#define PWM_OE BIT(3) +#define CNT_EN BIT(0) + +#define CNTR_WIDTH 24 + +DEFINE_RAW_SPINLOCK(ls1x_timer_lock); + +struct ls1x_clocksource { + void __iomem *reg_base; + unsigned long ticks_per_jiffy; + struct clocksource clksrc; +}; + +static inline struct ls1x_clocksource *to_ls1x_clksrc(struct clocksource *c) +{ + return container_of(c, struct ls1x_clocksource, clksrc); +} + +static inline void ls1x_pwmtimer_set_period(unsigned int period, + struct timer_of *to) +{ + writel(period, timer_of_base(to) + PWM_LRC); + writel(period, timer_of_base(to) + PWM_HRC); +} + +static inline void ls1x_pwmtimer_clear(struct timer_of *to) +{ + writel(0, timer_of_base(to) + PWM_CNTR); +} + +static inline void ls1x_pwmtimer_start(struct timer_of *to) +{ + writel((INT_EN | PWM_OE | CNT_EN), timer_of_base(to) + PWM_CTRL); +} + +static inline void ls1x_pwmtimer_stop(struct timer_of *to) +{ + writel(0, timer_of_base(to) + PWM_CTRL); +} + +static inline void ls1x_pwmtimer_irq_ack(struct timer_of *to) +{ + int val; + + val = readl(timer_of_base(to) + PWM_CTRL); + val |= INT_SR; + writel(val, timer_of_base(to) + PWM_CTRL); +} + +static irqreturn_t ls1x_clockevent_isr(int irq, void *dev_id) +{ + struct clock_event_device *clkevt = dev_id; + struct timer_of *to = to_timer_of(clkevt); + + ls1x_pwmtimer_irq_ack(to); + ls1x_pwmtimer_clear(to); + ls1x_pwmtimer_start(to); + + clkevt->event_handler(clkevt); + + return IRQ_HANDLED; +} + +static int ls1x_clockevent_set_state_periodic(struct clock_event_device *clkevt) +{ + struct timer_of *to = to_timer_of(clkevt); + + raw_spin_lock(&ls1x_timer_lock); + ls1x_pwmtimer_set_period(timer_of_period(to), to); + ls1x_pwmtimer_clear(to); + ls1x_pwmtimer_start(to); + raw_spin_unlock(&ls1x_timer_lock); + + return 0; +} + +static int ls1x_clockevent_tick_resume(struct clock_event_device *clkevt) +{ + raw_spin_lock(&ls1x_timer_lock); + ls1x_pwmtimer_start(to_timer_of(clkevt)); + raw_spin_unlock(&ls1x_timer_lock); + + return 0; +} + +static int ls1x_clockevent_set_state_shutdown(struct clock_event_device *clkevt) +{ + raw_spin_lock(&ls1x_timer_lock); + ls1x_pwmtimer_stop(to_timer_of(clkevt)); + raw_spin_unlock(&ls1x_timer_lock); + + return 0; +} + +static int ls1x_clockevent_set_next(unsigned long evt, + struct clock_event_device *clkevt) +{ + struct timer_of *to = to_timer_of(clkevt); + + raw_spin_lock(&ls1x_timer_lock); + ls1x_pwmtimer_set_period(evt, to); + ls1x_pwmtimer_clear(to); + ls1x_pwmtimer_start(to); + raw_spin_unlock(&ls1x_timer_lock); + + return 0; +} + +static struct timer_of ls1x_to = { + .flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK, + .clkevt = { + .name = "ls1x-pwmtimer", + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + .rating = 300, + .set_next_event = ls1x_clockevent_set_next, + .set_state_periodic = ls1x_clockevent_set_state_periodic, + .set_state_oneshot = ls1x_clockevent_set_state_shutdown, + .set_state_shutdown = ls1x_clockevent_set_state_shutdown, + .tick_resume = ls1x_clockevent_tick_resume, + }, + .of_irq = { + .handler = ls1x_clockevent_isr, + .flags = IRQF_TIMER, + }, +}; + +/* + * Since the PWM timer overflows every two ticks, its not very useful + * to just read by itself. So use jiffies to emulate a free + * running counter: + */ +static u64 ls1x_clocksource_read(struct clocksource *cs) +{ + struct ls1x_clocksource *ls1x_cs = to_ls1x_clksrc(cs); + unsigned long flags; + int count; + u32 jifs; + static int old_count; + static u32 old_jifs; + + raw_spin_lock_irqsave(&ls1x_timer_lock, flags); + /* + * Although our caller may have the read side of xtime_lock, + * this is now a seqlock, and we are cheating in this routine + * by having side effects on state that we cannot undo if + * there is a collision on the seqlock and our caller has to + * retry. (Namely, old_jifs and old_count.) So we must treat + * jiffies as volatile despite the lock. We read jiffies + * before latching the timer count to guarantee that although + * the jiffies value might be older than the count (that is, + * the counter may underflow between the last point where + * jiffies was incremented and the point where we latch the + * count), it cannot be newer. + */ + jifs = jiffies; + /* read the count */ + count = readl(ls1x_cs->reg_base + PWM_CNTR); + + /* + * It's possible for count to appear to go the wrong way for this + * reason: + * + * The timer counter underflows, but we haven't handled the resulting + * interrupt and incremented jiffies yet. + * + * Previous attempts to handle these cases intelligently were buggy, so + * we just do the simple thing now. + */ + if (count < old_count && jifs == old_jifs) + count = old_count; + + old_count = count; + old_jifs = jifs; + + raw_spin_unlock_irqrestore(&ls1x_timer_lock, flags); + + return (u64)(jifs * ls1x_cs->ticks_per_jiffy) + count; +} + +static struct ls1x_clocksource ls1x_clocksource = { + .clksrc = { + .name = "ls1x-pwmtimer", + .rating = 300, + .read = ls1x_clocksource_read, + .mask = CLOCKSOURCE_MASK(CNTR_WIDTH), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + }, +}; + +static int __init ls1x_pwm_clocksource_init(struct device_node *np) +{ + struct timer_of *to = &ls1x_to; + int ret; + + ret = timer_of_init(np, to); + if (ret) + return ret; + + clockevents_config_and_register(&to->clkevt, timer_of_rate(to), + 0x1, GENMASK(CNTR_WIDTH - 1, 0)); + + ls1x_clocksource.reg_base = timer_of_base(to); + ls1x_clocksource.ticks_per_jiffy = timer_of_period(to); + + return clocksource_register_hz(&ls1x_clocksource.clksrc, + timer_of_rate(to)); +} + +TIMER_OF_DECLARE(ls1x_pwm_clocksource, "loongson,ls1x-pwmtimer", + ls1x_pwm_clocksource_init);