From patchwork Sun Mar 19 21:29:36 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andre Przywara X-Patchwork-Id: 665049 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id DD3EBC6FD1F for ; Sun, 19 Mar 2023 21:31:52 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230289AbjCSVbv (ORCPT ); Sun, 19 Mar 2023 17:31:51 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46604 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230281AbjCSVb0 (ORCPT ); Sun, 19 Mar 2023 17:31:26 -0400 Received: from foss.arm.com (foss.arm.com [217.140.110.172]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id AE89A1C31B for ; Sun, 19 Mar 2023 14:30:47 -0700 (PDT) Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.121.207.14]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id 17B88168F; Sun, 19 Mar 2023 14:30:43 -0700 (PDT) Received: from slackpad.fritz.box (unknown [172.31.20.19]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPSA id A96153F67D; Sun, 19 Mar 2023 14:29:57 -0700 (PDT) From: Andre Przywara To: Rob Herring , Krzysztof Kozlowski , Jernej Skrabec , Samuel Holland , Chen-Yu Tsai Cc: linux-sunxi@lists.linux.dev, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Icenowy Zheng Subject: [PATCH v6 6/6] ARM: dts: suniv: Add Lctech Pi F1C200s devicetree Date: Sun, 19 Mar 2023 21:29:36 +0000 Message-Id: <20230319212936.26649-7-andre.przywara@arm.com> X-Mailer: git-send-email 2.35.7 In-Reply-To: <20230319212936.26649-1-andre.przywara@arm.com> References: <20230319212936.26649-1-andre.przywara@arm.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org The Lctech Pi F1C200s (also previously known under the Cherry Pi brand) is a small development board with the Allwinner F1C200s SoC. This is the same as the F1C100s, but with 64MB instead of 32MB co-packaged DRAM. Alongside the obligatory micro-SD card slot, the board features a SPI-NAND flash chip, LCD and touch connectors, and unpopulated expansion header pins. There are two USB Type-C ports on the board: One supplies the power, also connects to the USB MUSB OTG controller port. The other one is connected to an CH340 USB serial chip, which in turn is connected to UART1. Add a devicetree file, so that the board can be used easily. Signed-off-by: Andre Przywara Acked-by: Jernej Skrabec --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/suniv-f1c100s.dtsi | 6 ++ arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts | 76 +++++++++++++++++++ 3 files changed, 83 insertions(+) create mode 100644 arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 3b97d7c1e3c28..a627d5593e51b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1407,6 +1407,7 @@ dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-cubieboard4.dtb dtb-$(CONFIG_MACH_SUNIV) += \ suniv-f1c100s-licheepi-nano.dtb \ + suniv-f1c200s-lctech-pi.dtb \ suniv-f1c200s-popstick-v1.1.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-acer-a500-picasso.dtb \ diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi index 111f8bbc2a805..3c61d59ab5f86 100644 --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi @@ -207,6 +207,12 @@ uart0_pe_pins: uart0-pe-pins { pins = "PE0", "PE1"; function = "uart0"; }; + + /omit-if-no-ref/ + uart1_pa_pins: uart1-pa-pins { + pins = "PA2", "PA3"; + function = "uart1"; + }; }; i2c0: i2c@1c27000 { diff --git a/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts new file mode 100644 index 0000000000000..2d2a3f026df33 --- /dev/null +++ b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Arm Ltd, + * based on work: + * Copyright 2022 Icenowy Zheng + */ + +/dts-v1/; +#include "suniv-f1c100s.dtsi" + +#include + +/ { + model = "Lctech Pi F1C200s"; + compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s", + "allwinner,suniv-f1c100s"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vcc3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&mmc0 { + broken-cd; + bus-width = <4>; + disable-wp; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pc_pins>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pa_pins>; + status = "okay"; +}; + +/* + * This is a Type-C socket, but CC1/2 are not connected, and VBUS is connected + * to Vin, which supplies the board. Host mode works (if the board is powered + * otherwise), but peripheral is probably the intention. + */ +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +};