From patchwork Mon Mar 13 16:56:16 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andrew Halaney X-Patchwork-Id: 662794 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 52DF1C61DA4 for ; Mon, 13 Mar 2023 17:00:14 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229552AbjCMRAN (ORCPT ); Mon, 13 Mar 2023 13:00:13 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:57428 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231441AbjCMQ7o (ORCPT ); Mon, 13 Mar 2023 12:59:44 -0400 Received: from us-smtp-delivery-124.mimecast.com (us-smtp-delivery-124.mimecast.com [170.10.129.124]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id ED5E8366B7 for ; Mon, 13 Mar 2023 09:58:22 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=redhat.com; s=mimecast20190719; t=1678726674; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=EgUyAFiD1XudKGrCgIYV9yECJZPALfejLv+DfT2fuQE=; b=TDB03q7MLRNIIULfqCfssI+KSFGOF1S32ExMI0N1KKrOJGDrwrXo/wL6n+WCY5JIsEuiYK 4NTBjuCJs30VsAnrdyYwFYAuqtHk5NokI64jWLyZ/Kq2h8RHVGje7PtpxJQStD9OZIgA9K ctmPHEMFCwVUaAs8mal0NSaoOL/28YY= Received: from mail-oa1-f70.google.com (mail-oa1-f70.google.com [209.85.160.70]) by relay.mimecast.com with ESMTP with STARTTLS (version=TLSv1.3, cipher=TLS_AES_256_GCM_SHA384) id us-mta-297-pojudv4HNq-w6KXMN1Dv-g-1; Mon, 13 Mar 2023 12:57:53 -0400 X-MC-Unique: pojudv4HNq-w6KXMN1Dv-g-1 Received: by mail-oa1-f70.google.com with SMTP id 586e51a60fabf-1777dadbde5so4571327fac.7 for ; Mon, 13 Mar 2023 09:57:53 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1678726673; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=EgUyAFiD1XudKGrCgIYV9yECJZPALfejLv+DfT2fuQE=; b=TV5svJF8upqnhL3OnPWFKZQzqFHPb2ZAh0rM5tOpbJnhasnk0DdFTdOIkwolzFuPe2 TSWh0YUvfpPbJHy/OGRLr5APCtdI58h8aIKXTRr+4KhdavpJJ/g1SHSKcMu45ke6DXdS eCbmiuh+OJ3dDdcCLF7LotAQ+uvmh2wpDXYxYcIRQwwcSnjIlI6VYmP/9x2m6f+DVos8 ZIwzOkPLjfSMYfu6Ele7mgobt6+yTGLL47nQ+WwRGZ6SeFscf5q7JBAp1RbBrwlCETqe TXEmK6YgxCQK7ltWWFV1+n7B25q2RYjWKklKP+9YjNWiggddzySXBxlHOUMfq/83EZt9 5nRg== X-Gm-Message-State: AO0yUKVd2obpyGu4T+tSsmcvqf5wLV+W7Ca5XW64PdPJTxWnBRFhJpOL z6jloCO21w4xnsrL3MG9IbHS78C+uJ05rT3BdI03In85xOHVBp3jHNlVEFTVXyJ6FsGlPoqBY4w PpSoL5HDlaKauqBVA0Fd4gQ== X-Received: by 2002:a05:6808:1817:b0:37f:a0a5:bbd7 with SMTP id bh23-20020a056808181700b0037fa0a5bbd7mr5917156oib.19.1678726672859; Mon, 13 Mar 2023 09:57:52 -0700 (PDT) X-Google-Smtp-Source: AK7set8IMVgi9dA73YStFP9z7uXb2gOJctItwWnLxwr+RDkpbh1tquQEEvHPC1i2gPialB5T/ZvK2Q== X-Received: by 2002:a05:6808:1817:b0:37f:a0a5:bbd7 with SMTP id bh23-20020a056808181700b0037fa0a5bbd7mr5917143oib.19.1678726672584; Mon, 13 Mar 2023 09:57:52 -0700 (PDT) Received: from halaney-x13s.attlocal.net ([2600:1700:1ff0:d0e0::21]) by smtp.gmail.com with ESMTPSA id o2-20020acad702000000b00384d3003fa3sm3365273oig.26.2023.03.13.09.57.50 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 13 Mar 2023 09:57:52 -0700 (PDT) From: Andrew Halaney To: linux-kernel@vger.kernel.org Cc: agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org, davem@davemloft.net, edumazet@google.com, kuba@kernel.org, pabeni@redhat.com, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, vkoul@kernel.org, bhupesh.sharma@linaro.org, mturquette@baylibre.com, sboyd@kernel.org, peppe.cavallaro@st.com, alexandre.torgue@foss.st.com, joabreu@synopsys.com, mcoquelin.stm32@gmail.com, richardcochran@gmail.com, linux@armlinux.org.uk, veekhee@apple.com, tee.min.tan@linux.intel.com, mohammad.athari.ismail@intel.com, jonathanh@nvidia.com, ruppala@nvidia.com, bmasney@redhat.com, andrey.konovalov@linaro.org, linux-arm-msm@vger.kernel.org, netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-clk@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, ncai@quicinc.com, jsuraj@qti.qualcomm.com, hisunil@quicinc.com, Andrew Halaney Subject: [PATCH net-next 07/11] arm64: dts: qcom: sa8540p-ride: Add ethernet nodes Date: Mon, 13 Mar 2023 11:56:16 -0500 Message-Id: <20230313165620.128463-8-ahalaney@redhat.com> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20230313165620.128463-1-ahalaney@redhat.com> References: <20230313165620.128463-1-ahalaney@redhat.com> MIME-Version: 1.0 Content-type: text/plain Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Enable both the MACs found on the board. ethernet0 and ethernet1 both ultimately go to a series of on board switches which aren't managed by this processor. ethernet0 is connected to a Marvell 88EA1512 phy via RGMII. That goes to the series of switches via SGMII on the "media" side of the phy. RGMII_SGMII mode is enabled via devicetree register descriptions. The switch on the "media" side has auto-negotiation disabled, so configuration from userspace similar to: ethtool -s eth0 autoneg off speed 1000 duplex full is necessary to get traffic flowing on that interface. ethernet1 is in a mac2mac/fixed-link configuration going to the same series of switches directly via RGMII. Signed-off-by: Andrew Halaney --- arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 181 ++++++++++++++++++++++ 1 file changed, 181 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts index 8b7555f22528..b874f3909382 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts @@ -28,6 +28,65 @@ aliases { chosen { stdout-path = "serial0:115200n8"; }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; }; &apps_rsc { @@ -151,6 +210,68 @@ vreg_l8g: ldo8 { }; }; +ðernet0 { + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + + max-speed = <1000>; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii-txid"; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet0_default>; + + status = "okay"; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + + compatible = "snps,dwmac-mdio"; + + /* Marvell 88EA1512 */ + rgmii_phy: phy@8 { + reg = <0x8>; + + interrupt-parent = <&tlmm>; + interrupts-extended = <&tlmm 127 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&pmm8540c_gpios 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + + device_type = "ethernet-phy"; + + /* Set to RGMII_SGMII mode and soft reset. Turn off auto-negotiation + * from userspace to talk to the switch on the SGMII side of things + */ + marvell,reg-init = + /* Set MODE[2:0] to RGMII_SGMII */ + <0x12 0x14 0xfff8 0x4>, + /* Soft reset required after changing MODE[2:0] */ + <0x12 0x14 0x7fff 0x8000>; + }; + }; +}; + +ðernet1 { + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + + max-speed = <1000>; + phy-mode = "rgmii-txid"; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet1_default>; + + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_default>; @@ -316,6 +437,66 @@ &xo_board_clk { /* PINCTRL */ &tlmm { + ethernet0_default: ethernet0-default-state { + mdc-pins { + pins = "gpio175"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + mdio-pins { + pins = "gpio176"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-tx-pins { + pins = "gpio183", "gpio184", "gpio185", "gpio186", "gpio187", "gpio188"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-rx-pins { + pins = "gpio177", "gpio178", "gpio179", "gpio180", "gpio181", "gpio182"; + function = "rgmii_0"; + drive-strength = <16>; + bias-disable; + }; + }; + + ethernet1_default: ethernet1-default-state { + mdc-pins { + pins = "gpio97"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + mdio-pins { + pins = "gpio98"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-tx-pins { + pins = "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-rx-pins { + pins = "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104"; + function = "rgmii_1"; + drive-strength = <16>; + bias-disable; + }; + }; + i2c0_default: i2c0-default-state { /* To USB7002T-I/KDXVA0 USB hub (SIP1 only) */ pins = "gpio135", "gpio136";