From patchwork Mon Mar 6 19:15:28 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sean Anderson X-Patchwork-Id: 659468 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 24120C74A5B for ; Mon, 6 Mar 2023 19:16:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229972AbjCFTQg (ORCPT ); Mon, 6 Mar 2023 14:16:36 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38792 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229966AbjCFTQd (ORCPT ); Mon, 6 Mar 2023 14:16:33 -0500 Received: from EUR05-AM6-obe.outbound.protection.outlook.com (mail-am6eur05hn2244.outbound.protection.outlook.com [52.100.174.244]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 024536546D; Mon, 6 Mar 2023 11:16:21 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=seco.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=kaiK1l+eWgfWwM0AJjH2lG+S83FCq+JF1QqFDPdMW24=; b=rhpPnw17KGZbuqgf8wD200OQqZ8rzotNyILc4Hzeeitgn5QripcRJog9H1xPxFy22PcgQaZXoX+O1nyNhkUgpGEYt2LaVnSENpC5vwaInFOqghPyV5oGmHfxjIRIwicgz4k7B5ZKQIW9DRQAyCj9ItQSPKZ+qFB+9jK03zkX2ZroK3P/bz/F9lpmn5g9Uuiz0rScEacJrnK8OMl9wqVfJ0aR2zyjH06rFFtRAyAw6PXRpewMEXQphLLWW/+yVCViuCRruBqdj5+94U5Mg4bdS5QxwUsearYQiNQ6jQMVDo46E82vylhZpS3B1tf6T2r+uelVjPaTLN2rOScQNwN10g== Received: from AM5PR0602CA0006.eurprd06.prod.outlook.com (2603:10a6:203:a3::16) by AM7PR03MB6277.eurprd03.prod.outlook.com (2603:10a6:20b:13a::15) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6156.29; Mon, 6 Mar 2023 19:16:18 +0000 Received: from AM6EUR05FT058.eop-eur05.prod.protection.outlook.com (2603:10a6:203:a3:cafe::75) by AM5PR0602CA0006.outlook.office365.com (2603:10a6:203:a3::16) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6156.28 via Frontend Transport; Mon, 6 Mar 2023 19:16:18 +0000 X-MS-Exchange-Authentication-Results: spf=fail (sender IP is 20.160.56.86) smtp.mailfrom=seco.com; dkim=pass (signature was verified) header.d=seco.com;dmarc=pass action=none header.from=seco.com; Received-SPF: Fail (protection.outlook.com: domain of seco.com does not designate 20.160.56.86 as permitted sender) receiver=protection.outlook.com; client-ip=20.160.56.86; helo=inpost-eu.tmcas.trendmicro.com; Received: from inpost-eu.tmcas.trendmicro.com (20.160.56.86) by AM6EUR05FT058.mail.protection.outlook.com (10.233.240.72) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6178.16 via Frontend Transport; Mon, 6 Mar 2023 19:16:18 +0000 Received: from outmta (unknown [192.168.82.132]) by inpost-eu.tmcas.trendmicro.com (Trend Micro CAS) with ESMTP id 01CBC20080270; Mon, 6 Mar 2023 19:16:18 +0000 (UTC) Received: from EUR05-VI1-obe.outbound.protection.outlook.com (unknown [104.47.17.177]) by repre.tmcas.trendmicro.com (Trend Micro CAS) with ESMTPS id 6361920080074; Mon, 6 Mar 2023 19:15:15 +0000 (UTC) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=fAMAHR//F35YzHh4HMHE4wAR1sOzd6qBlnCXHeVJxZ1CGUVOiGb/+DLR6FbzGUVImlBEiF+zoD0jAkjaY9MqekrygUZ1tDb85jtXoYmprQA9nS8zCa3JKmG8agJxqH0vvAyVYdbVBNp8sgZnL3gXCQrnnY8Uv8iohj1v4y8/HuTuB3SyMomXZRvpmvU6M/NQGkaik5zjDQeZPl0ADG2yKHwUwGdwSjpXFP4wB3vHaOsf+IL+YplwKNOkHGRWPORTzVTFVRA8i8kdcG0YI9jwYiZGq7FRm+Uh34UxK192jQVIzzGycProwkzGKNCNH0EW8uLzEMIE1TcacH1a7QFr+w== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=kaiK1l+eWgfWwM0AJjH2lG+S83FCq+JF1QqFDPdMW24=; b=nXCwgpJid2P4jDc28EPLhs+iOvGiNGYMVBsxF7J9WtmYG53euPPTlSJYG7IejZe44483ZSr4WqLagRV+LUHIbi6Z7OjrOXuiJ3ugIlL+TLmb7qo6MqYxbORXva9Or2hmmrWzYQJQggav9IA6hdKjctvsiDIwCdmcq+lFIexxRVYf21D3aAIy4yzfvFgYIRQgGd6qtaTJ/cEjpCZHfXNVwHahl+fNumVyNWqS48rgf9ODbq04mV436iROi74FhBPG3lV5bXneBsVHvUMPuSMRufmGg3opcRhepVt5ApZBbkhxHAsvDiepyoOF+u0Eer+M7UnOvL9zIAYpIhsaKaJXkg== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=seco.com; dmarc=pass action=none header.from=seco.com; dkim=pass header.d=seco.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=seco.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=kaiK1l+eWgfWwM0AJjH2lG+S83FCq+JF1QqFDPdMW24=; b=rhpPnw17KGZbuqgf8wD200OQqZ8rzotNyILc4Hzeeitgn5QripcRJog9H1xPxFy22PcgQaZXoX+O1nyNhkUgpGEYt2LaVnSENpC5vwaInFOqghPyV5oGmHfxjIRIwicgz4k7B5ZKQIW9DRQAyCj9ItQSPKZ+qFB+9jK03zkX2ZroK3P/bz/F9lpmn5g9Uuiz0rScEacJrnK8OMl9wqVfJ0aR2zyjH06rFFtRAyAw6PXRpewMEXQphLLWW/+yVCViuCRruBqdj5+94U5Mg4bdS5QxwUsearYQiNQ6jQMVDo46E82vylhZpS3B1tf6T2r+uelVjPaTLN2rOScQNwN10g== Authentication-Results-Original: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=seco.com; Received: from DB9PR03MB8847.eurprd03.prod.outlook.com (2603:10a6:10:3dd::13) by AS8PR03MB9511.eurprd03.prod.outlook.com (2603:10a6:20b:5a6::19) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6156.28; Mon, 6 Mar 2023 19:16:04 +0000 Received: from DB9PR03MB8847.eurprd03.prod.outlook.com ([fe80::dbcf:1089:3242:614e]) by DB9PR03MB8847.eurprd03.prod.outlook.com ([fe80::dbcf:1089:3242:614e%5]) with mapi id 15.20.6156.027; Mon, 6 Mar 2023 19:16:04 +0000 From: Sean Anderson To: Vinod Koul , Kishon Vijay Abraham I , linux-phy@lists.infradead.org Cc: Madalin Bucur , linuxppc-dev@lists.ozlabs.org, devicetree@vger.kernel.org, Ioana Ciornei , Rob Herring , Camelia Alexandra Groza , linux-arm-kernel@lists.infradead.org, Bagas Sanjaya , Krzysztof Kozlowski , Sean Anderson , Michael Turquette , Stephen Boyd , linux-clk@vger.kernel.org Subject: [PATCH v10 06/13] clk: Add Lynx 10G SerDes PLL driver Date: Mon, 6 Mar 2023 14:15:28 -0500 Message-Id: <20230306191535.1917656-7-sean.anderson@seco.com> X-Mailer: git-send-email 2.35.1.1320.gc452695387.dirty In-Reply-To: <20230306191535.1917656-1-sean.anderson@seco.com> References: <20230306191535.1917656-1-sean.anderson@seco.com> X-ClientProxiedBy: MN2PR11CA0015.namprd11.prod.outlook.com (2603:10b6:208:23b::20) To DB9PR03MB8847.eurprd03.prod.outlook.com (2603:10a6:10:3dd::13) MIME-Version: 1.0 X-MS-TrafficTypeDiagnostic: DB9PR03MB8847:EE_|AS8PR03MB9511:EE_|AM6EUR05FT058:EE_|AM7PR03MB6277:EE_ X-MS-Office365-Filtering-Correlation-Id: f41a3575-7a09-43d0-624e-08db1e774346 X-TrendMicro-CAS-OUT-LOOP-IDENTIFIER: 656f966764b7fb185830381c646b41a1 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam-Untrusted: BCL:0; X-Microsoft-Antispam-Message-Info-Original: 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 X-Forefront-Antispam-Report-Untrusted: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:DB9PR03MB8847.eurprd03.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230025)(346002)(376002)(39850400004)(396003)(136003)(366004)(451199018)(66899018)(110136005)(54906003)(966005)(36756003)(316002)(83380400001)(86362001)(6486002)(6506007)(186003)(2906002)(5660300002)(66476007)(4326008)(30864003)(8936002)(66946007)(41300700001)(8676002)(478600001)(44832011)(26005)(6512007)(1076003)(2616005)(7416002)(52116002)(66556008)(6666004)(38100700002)(38350700002)(21314003); DIR:OUT; SFP:1101; X-MS-Exchange-Transport-CrossTenantHeadersStamped: AS8PR03MB9511 X-EOPAttributedMessage: 0 X-MS-Exchange-Transport-CrossTenantHeadersStripped: AM6EUR05FT058.eop-eur05.prod.protection.outlook.com X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id-Prvs: d223b684-8dd2-48d6-6a3f-08db1e773b35 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:20.160.56.86; CTRY:NL; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:inpost-eu.tmcas.trendmicro.com; PTR:inpost-eu.tmcas.trendmicro.com; CAT:NONE; SFS:(13230025)(136003)(396003)(39850400004)(346002)(376002)(451199018)(5400799012)(46966006)(36840700001)(66899018)(36756003)(4326008)(70586007)(70206006)(41300700001)(40480700001)(8676002)(8936002)(44832011)(6506007)(5660300002)(7416002)(30864003)(2906002)(356005)(86362001)(36860700001)(7636003)(7596003)(82740400003)(34020700004)(6666004)(1076003)(26005)(6486002)(966005)(478600001)(54906003)(110136005)(6512007)(316002)(82310400005)(83380400001)(47076005)(336012)(2616005)(186003)(21314003)(12100799021); DIR:OUT; SFP:1501; X-OriginatorOrg: seco.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 06 Mar 2023 19:16:18.1059 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: f41a3575-7a09-43d0-624e-08db1e774346 X-MS-Exchange-CrossTenant-Id: bebe97c3-6438-442e-ade3-ff17aa50e733 X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=bebe97c3-6438-442e-ade3-ff17aa50e733; Ip=[20.160.56.86]; Helo=[inpost-eu.tmcas.trendmicro.com] X-MS-Exchange-CrossTenant-AuthSource: AM6EUR05FT058.eop-eur05.prod.protection.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: AM7PR03MB6277 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org This adds support for the PLLs found in Lynx 10G "SerDes" devices found on various NXP QorIQ SoCs. There are two PLLs in each SerDes. This driver has been split from the main PHY driver to allow for better review, even though these PLLs are not present anywhere else besides the SerDes. An auxiliary device is not used as it offers no benefits over a function call (and there is no need to have a separate device). The PLLs are modeled as clocks proper to let us take advantage of the existing clock infrastructure. I have not given the same treatment to the per-lane clocks because they need to be programmed in-concert with the rest of the lane settings. One tricky thing is that the VCO (PLL) rate exceeds 2^32 (maxing out at around 5GHz). This will be a problem on 32-bit platforms, since clock rates are stored as unsigned longs. To work around this, the pll clock rate is generally treated in units of kHz. The PLLs are configured rather interestingly. Instead of the usual direct programming of the appropriate divisors, the input and output clock rates are selected directly. Generally, the only restriction is that the input and output must be integer multiples of each other. This suggests some kind of internal look-up table. The datasheets generally list out the supported combinations explicitly, and not all input/output combinations are documented. I'm not sure if this is due to lack of support, or due to an oversight. If this becomes an issue, then some combinations can be blacklisted (or whitelisted). This may also be necessary for other SoCs which have more stringent clock requirements. Signed-off-by: Sean Anderson --- Changes in v10: - Remove unnecessary inclusion of clk.h - Don't gate clocks in compatibility mode Changes in v9: - Convert some u32s to unsigned long to match arguments - Switch from round_rate to determine_rate - Drop explicit reference to reference clock - Use .parent_names when requesting parents - Use devm_clk_hw_get_clk to pass clocks back to serdes - Fix indentation - Split off from following patch to allow for better review MAINTAINERS | 7 + drivers/clk/Makefile | 1 + drivers/clk/clk-fsl-lynx-10g.c | 510 +++++++++++++++++++++++++++++++++ drivers/phy/freescale/Kconfig | 6 + include/linux/phy/lynx-10g.h | 16 ++ 5 files changed, 540 insertions(+) create mode 100644 drivers/clk/clk-fsl-lynx-10g.c create mode 100644 include/linux/phy/lynx-10g.h diff --git a/MAINTAINERS b/MAINTAINERS index edd3d562beee..e964fac26a05 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12207,6 +12207,13 @@ S: Maintained W: http://linux-test-project.github.io/ T: git https://github.com/linux-test-project/ltp.git +LYNX 10G SERDES DRIVER +M: Sean Anderson +S: Maintained +F: drivers/clk/clk-fsl-lynx-10g.c +F: include/dt-bindings/clock/fsl,lynx-10g.h +F: include/linux/phy/lynx-10g.h + LYNX 28G SERDES PHY DRIVER M: Ioana Ciornei L: netdev@vger.kernel.org diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index e3ca0d058a25..eebed69f6c58 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_ARCH_SPARX5) += clk-sparx5.o obj-$(CONFIG_COMMON_CLK_EN7523) += clk-en7523.o obj-$(CONFIG_COMMON_CLK_FIXED_MMIO) += clk-fixed-mmio.o obj-$(CONFIG_COMMON_CLK_FSL_FLEXSPI) += clk-fsl-flexspi.o +obj-$(CONFIG_PHY_FSL_LYNX_10G) += clk-fsl-lynx-10g.o obj-$(CONFIG_COMMON_CLK_FSL_SAI) += clk-fsl-sai.o obj-$(CONFIG_COMMON_CLK_GEMINI) += clk-gemini.o obj-$(CONFIG_COMMON_CLK_ASPEED) += clk-aspeed.o diff --git a/drivers/clk/clk-fsl-lynx-10g.c b/drivers/clk/clk-fsl-lynx-10g.c new file mode 100644 index 000000000000..78357303b578 --- /dev/null +++ b/drivers/clk/clk-fsl-lynx-10g.c @@ -0,0 +1,510 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Sean Anderson + * + * This file contains the implementation for the PLLs found on Lynx 10G phys. + * + * XXX: The VCO rate of the PLLs can exceed ~4GHz, which is the maximum rate + * expressable in an unsigned long. To work around this, rates are specified in + * kHz. This is as if there was a division by 1000 in the PLL. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PLL_STRIDE 0x20 +#define PLLa(a, off) ((a) * PLL_STRIDE + (off)) +#define PLLaRSTCTL(a) PLLa(a, 0x00) +#define PLLaCR0(a) PLLa(a, 0x04) + +#define PLLaRSTCTL_RSTREQ BIT(31) +#define PLLaRSTCTL_RST_DONE BIT(30) +#define PLLaRSTCTL_RST_ERR BIT(29) +#define PLLaRSTCTL_PLLRST_B BIT(7) +#define PLLaRSTCTL_SDRST_B BIT(6) +#define PLLaRSTCTL_SDEN BIT(5) + +#define PLLaRSTCTL_ENABLE_SET (PLLaRSTCTL_RST_DONE | PLLaRSTCTL_PLLRST_B | \ + PLLaRSTCTL_SDRST_B | PLLaRSTCTL_SDEN) +#define PLLaRSTCTL_ENABLE_MASK (PLLaRSTCTL_ENABLE_SET | PLLaRSTCTL_RST_ERR) + +#define PLLaCR0_POFF BIT(31) +#define PLLaCR0_RFCLK_SEL GENMASK(30, 28) +#define PLLaCR0_PLL_LCK BIT(23) +#define PLLaCR0_FRATE_SEL GENMASK(19, 16) +#define PLLaCR0_DLYDIV_SEL GENMASK(1, 0) + +#define PLLaCR0_DLYDIV_SEL_16 0b01 + +/** + * struct lynx_clk - Driver data for the PLLs + * @pll: The PLL clock + * @ex_dly: The "PLLa_ex_dly_clk" clock + * @dev: The serdes device + * @regmap: Our registers + * @idx: Which PLL this clock is for + */ +struct lynx_clk { + struct clk_hw pll, ex_dly; + struct device *dev; + struct regmap *regmap; + unsigned int idx; +}; + +static u32 lynx_read(struct lynx_clk *clk, u32 reg) +{ + unsigned int ret = 0; + + WARN_ON_ONCE(regmap_read(clk->regmap, reg, &ret)); + return ret; +} + +static void lynx_write(struct lynx_clk *clk, u32 val, u32 reg) +{ + WARN_ON_ONCE(regmap_write(clk->regmap, reg, val)); +} + +static struct lynx_clk *lynx_pll_to_clk(struct clk_hw *hw) +{ + return container_of(hw, struct lynx_clk, pll); +} + +static struct lynx_clk *lynx_ex_dly_to_clk(struct clk_hw *hw) +{ + return container_of(hw, struct lynx_clk, ex_dly); +} + +static void lynx_pll_stop(struct lynx_clk *clk) +{ + u32 rstctl; + + rstctl = lynx_read(clk, PLLaRSTCTL(clk->idx)); + rstctl &= ~PLLaRSTCTL_SDRST_B; + lynx_write(clk, rstctl, PLLaRSTCTL(clk->idx)); + + ndelay(50); + + rstctl = lynx_read(clk, PLLaRSTCTL(clk->idx)); + rstctl &= ~(PLLaRSTCTL_SDEN | PLLaRSTCTL_PLLRST_B); + lynx_write(clk, rstctl, PLLaRSTCTL(clk->idx)); + + ndelay(100); +} + +static void lynx_pll_disable(struct clk_hw *hw) +{ + struct lynx_clk *clk = lynx_pll_to_clk(hw); + u32 cr0; + + dev_dbg(clk->dev, "disable pll%d\n", clk->idx); + + lynx_pll_stop(clk); + + cr0 = lynx_read(clk, PLLaCR0(clk->idx)); + cr0 |= PLLaCR0_POFF; + lynx_write(clk, cr0, PLLaCR0(clk->idx)); +} + +static int lynx_pll_reset(struct lynx_clk *clk) +{ + int ret; + u32 rstctl = lynx_read(clk, PLLaRSTCTL(clk->idx)); + + rstctl |= PLLaRSTCTL_RSTREQ; + lynx_write(clk, rstctl, PLLaRSTCTL(clk->idx)); + ret = read_poll_timeout(lynx_read, rstctl, + rstctl & (PLLaRSTCTL_RST_DONE | PLLaRSTCTL_RST_ERR), + 100, 5000, true, clk, PLLaRSTCTL(clk->idx)); + if (rstctl & PLLaRSTCTL_RST_ERR) + ret = -EIO; + if (ret) { + dev_err(clk->dev, "pll%d reset failed\n", clk->idx); + return ret; + } + + rstctl |= PLLaRSTCTL_SDEN | PLLaRSTCTL_PLLRST_B | PLLaRSTCTL_SDRST_B; + lynx_write(clk, rstctl, PLLaRSTCTL(clk->idx)); + return 0; +} + +static int lynx_pll_prepare(struct clk_hw *hw) +{ + struct lynx_clk *clk = lynx_pll_to_clk(hw); + u32 rstctl = lynx_read(clk, PLLaRSTCTL(clk->idx)); + u32 cr0 = lynx_read(clk, PLLaCR0(clk->idx)); + + /* + * "Enabling" the PLL involves resetting it (and all attached lanes). + * Avoid doing this if we are already enabled. + */ + if (!(cr0 & PLLaCR0_POFF) && + (rstctl & PLLaRSTCTL_ENABLE_MASK) == PLLaRSTCTL_ENABLE_SET) { + dev_dbg(clk->dev, "pll%d already prepared\n", clk->idx); + return 0; + } + + dev_dbg(clk->dev, "prepare pll%d\n", clk->idx); + + cr0 &= ~PLLaCR0_POFF; + lynx_write(clk, cr0, PLLaCR0(clk->idx)); + + return lynx_pll_reset(clk); +} + +static int lynx_pll_is_enabled(struct clk_hw *hw) +{ + struct lynx_clk *clk = lynx_pll_to_clk(hw); + u32 cr0 = lynx_read(clk, PLLaCR0(clk->idx)); + bool enabled = !(cr0 & PLLaCR0_POFF); + + dev_dbg(clk->dev, "pll%d %s enabled\n", clk->idx, + enabled ? "is" : "is not"); + + return enabled; +} + +static const unsigned long rfclk_sel_map[8] = { + [0b000] = 100000000, + [0b001] = 125000000, + [0b010] = 156250000, + [0b011] = 150000000, +}; + +/** + * lynx_rfclk_to_sel() - Convert a reference clock rate to a selector + * @rate: The reference clock rate + * + * To allow for some variation in the reference clock rate, up to 100ppm of + * error is allowed. + * + * Return: An appropriate selector for @rate, or -%EINVAL. + */ +static int lynx_rfclk_to_sel(unsigned long rate) +{ + int ret; + + for (ret = 0; ret < ARRAY_SIZE(rfclk_sel_map); ret++) { + unsigned long rfclk_rate = rfclk_sel_map[ret]; + /* Allow an error of 100ppm */ + unsigned long error = rfclk_rate / 10000; + + if (abs(rate - rfclk_rate) < error) + return ret; + } + + return -EINVAL; +} + +static const unsigned long frate_sel_map[16] = { + [0b0000] = 5000000, + [0b0101] = 3750000, + [0b0110] = 5156250, + [0b0111] = 4000000, + [0b1001] = 3125000, + [0b1010] = 3000000, +}; + +/** + * lynx_frate_to_sel() - Convert a VCO clock rate to a selector + * @rate_khz: The VCO frequency, in kHz + * + * Return: An appropriate selector for @rate_khz, or -%EINVAL. + */ +static int lynx_frate_to_sel(unsigned long rate_khz) +{ + int ret; + + for (ret = 0; ret < ARRAY_SIZE(frate_sel_map); ret++) + if (frate_sel_map[ret] == rate_khz) + return ret; + + return -EINVAL; +} + +static u32 lynx_pll_ratio(u32 frate_sel, u32 rfclk_sel) +{ + u64 frate; + u32 rfclk, error, ratio; + + frate = frate_sel_map[frate_sel] * (u64)HZ_PER_KHZ; + rfclk = rfclk_sel_map[rfclk_sel]; + + if (!frate || !rfclk) + return 0; + + ratio = div_u64_rem(frate, rfclk, &error); + if (!error) + return ratio; + return 0; +} + +static unsigned long lynx_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct lynx_clk *clk = lynx_pll_to_clk(hw); + u32 cr0 = lynx_read(clk, PLLaCR0(clk->idx)); + u32 frate_sel = FIELD_GET(PLLaCR0_FRATE_SEL, cr0); + u32 rfclk_sel = FIELD_GET(PLLaCR0_RFCLK_SEL, cr0); + u32 ratio = lynx_pll_ratio(frate_sel, rfclk_sel); + unsigned long ret; + + /* Ensure that the parent matches our rfclk selector */ + if (rfclk_sel == lynx_rfclk_to_sel(parent_rate)) + ret = mult_frac(parent_rate, ratio, HZ_PER_KHZ); + else + ret = 0; + + dev_dbg(clk->dev, "recalc pll%d new=%llu parent=%lu\n", clk->idx, + (u64)ret * HZ_PER_KHZ, parent_rate); + return ret; +} + +static int lynx_pll_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + int frate_sel, rfclk_sel; + struct lynx_clk *clk = lynx_pll_to_clk(hw); + u32 ratio; + + dev_dbg(clk->dev, "round pll%d new=%llu parent=%lu\n", clk->idx, + (u64)req->rate * HZ_PER_KHZ, req->best_parent_rate); + + frate_sel = lynx_frate_to_sel(req->rate); + if (frate_sel < 0) + return frate_sel; + + /* Try the current parent rate */ + rfclk_sel = lynx_rfclk_to_sel(req->best_parent_rate); + if (rfclk_sel >= 0) { + ratio = lynx_pll_ratio(frate_sel, rfclk_sel); + if (ratio) { + req->rate = mult_frac(req->best_parent_rate, ratio, + HZ_PER_KHZ); + return 0; + } + } + + /* Try all possible parent rates */ + for (rfclk_sel = 0; + rfclk_sel < ARRAY_SIZE(rfclk_sel_map); + rfclk_sel++) { + unsigned long new_parent_rate; + + ratio = lynx_pll_ratio(frate_sel, rfclk_sel); + if (!ratio) + continue; + + /* Ensure the reference clock can produce this rate */ + new_parent_rate = rfclk_sel_map[rfclk_sel]; + new_parent_rate = clk_hw_round_rate(req->best_parent_hw, + new_parent_rate); + if (rfclk_sel != lynx_rfclk_to_sel(new_parent_rate)) + continue; + + req->rate = mult_frac(new_parent_rate, ratio, HZ_PER_KHZ); + req->best_parent_rate = new_parent_rate; + return 0; + } + + return -EINVAL; +} + +static int lynx_pll_set_rate(struct clk_hw *hw, unsigned long rate_khz, + unsigned long parent_rate) +{ + int frate_sel, rfclk_sel; + struct lynx_clk *clk = lynx_pll_to_clk(hw); + u32 ratio, cr0 = lynx_read(clk, PLLaCR0(clk->idx)); + + dev_dbg(clk->dev, "set rate pll%d new=%llu parent=%lu\n", clk->idx, + (u64)rate_khz * HZ_PER_KHZ, parent_rate); + + frate_sel = lynx_frate_to_sel(rate_khz); + if (frate_sel < 0) + return frate_sel; + + rfclk_sel = lynx_rfclk_to_sel(parent_rate); + if (rfclk_sel < 0) + return rfclk_sel; + + ratio = lynx_pll_ratio(frate_sel, rfclk_sel); + if (!ratio) + return -EINVAL; + + lynx_pll_stop(clk); + cr0 &= ~(PLLaCR0_RFCLK_SEL | PLLaCR0_FRATE_SEL); + cr0 |= FIELD_PREP(PLLaCR0_RFCLK_SEL, rfclk_sel); + cr0 |= FIELD_PREP(PLLaCR0_FRATE_SEL, frate_sel); + lynx_write(clk, cr0, PLLaCR0(clk->idx)); + /* Don't bother resetting if it's off */ + if (cr0 & PLLaCR0_POFF) + return 0; + return lynx_pll_reset(clk); +} + +static const struct clk_ops lynx_pll_clk_ops = { + .prepare = lynx_pll_prepare, + .disable = lynx_pll_disable, + .is_enabled = lynx_pll_is_enabled, + .recalc_rate = lynx_pll_recalc_rate, + .determine_rate = lynx_pll_determine_rate, + .set_rate = lynx_pll_set_rate, +}; + +static void lynx_ex_dly_disable(struct clk_hw *hw) +{ + struct lynx_clk *clk = lynx_ex_dly_to_clk(hw); + u32 cr0 = lynx_read(clk, PLLaCR0(clk->idx)); + + cr0 &= ~PLLaCR0_DLYDIV_SEL; + lynx_write(clk, PLLaCR0(clk->idx), cr0); +} + +static int lynx_ex_dly_enable(struct clk_hw *hw) +{ + struct lynx_clk *clk = lynx_ex_dly_to_clk(hw); + u32 cr0 = lynx_read(clk, PLLaCR0(clk->idx)); + + cr0 &= ~PLLaCR0_DLYDIV_SEL; + cr0 |= FIELD_PREP(PLLaCR0_DLYDIV_SEL, PLLaCR0_DLYDIV_SEL_16); + lynx_write(clk, PLLaCR0(clk->idx), cr0); + return 0; +} + +static int lynx_ex_dly_is_enabled(struct clk_hw *hw) +{ + struct lynx_clk *clk = lynx_ex_dly_to_clk(hw); + + return lynx_read(clk, PLLaCR0(clk->idx)) & PLLaCR0_DLYDIV_SEL; +} + +static unsigned long lynx_ex_dly_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return parent_rate / 16; +} + +static const struct clk_ops lynx_ex_dly_clk_ops = { + .enable = lynx_ex_dly_enable, + .disable = lynx_ex_dly_disable, + .is_enabled = lynx_ex_dly_is_enabled, + .recalc_rate = lynx_ex_dly_recalc_rate, +}; + +static int lynx_clk_init(struct clk_hw_onecell_data *hw_data, + struct device *dev, struct regmap *regmap, + unsigned int index, bool compat) +{ + const struct clk_hw *ex_dly_parents; + struct clk_parent_data pll_parents[1] = { }; + struct clk_init_data pll_init = { + .ops = &lynx_pll_clk_ops, + .parent_data = pll_parents, + .num_parents = 1, + .flags = CLK_GET_RATE_NOCACHE | CLK_SET_RATE_PARENT | + CLK_OPS_PARENT_ENABLE, + }; + struct clk_init_data ex_dly_init = { + .ops = &lynx_ex_dly_clk_ops, + .parent_hws = &ex_dly_parents, + .num_parents = 1, + }; + struct lynx_clk *clk; + int ret; + + clk = devm_kzalloc(dev, sizeof(*clk), GFP_KERNEL); + if (!clk) + return -ENOMEM; + + clk->dev = dev; + clk->regmap = regmap; + clk->idx = index; + + pll_parents[0].fw_name = kasprintf(GFP_KERNEL, "ref%d", index); + pll_init.name = kasprintf(GFP_KERNEL, "%s.pll%d_khz", dev_name(dev), + index); + ex_dly_init.name = kasprintf(GFP_KERNEL, "%s.pll%d_ex_dly_khz", + dev_name(dev), index); + if (!pll_parents[0].fw_name || !pll_init.name || !ex_dly_init.name) { + ret = -ENOMEM; + goto out; + } + + if (compat) + pll_init.flags |= CLK_IGNORE_UNUSED; + clk->pll.init = &pll_init; + ret = devm_clk_hw_register(dev, &clk->pll); + if (ret) { + dev_err_probe(dev, ret, "could not register %s\n", + pll_init.name); + goto out; + } + + ex_dly_parents = &clk->pll; + clk->ex_dly.init = &ex_dly_init; + ret = devm_clk_hw_register(dev, &clk->ex_dly); + if (ret) + dev_err_probe(dev, ret, "could not register %s\n", + ex_dly_init.name); + + hw_data->hws[LYNX10G_PLLa(index)] = &clk->pll; + hw_data->hws[LYNX10G_PLLa_EX_DLY(index)] = &clk->ex_dly; + +out: + kfree(pll_parents[0].fw_name); + kfree(pll_init.name); + kfree(ex_dly_init.name); + return ret; +} + +#define NUM_PLLS 2 +#define NUM_CLKS (NUM_PLLS * LYNX10G_CLKS_PER_PLL) + +int lynx_clks_init(struct device *dev, struct regmap *regmap, + struct clk *plls[2], struct clk *ex_dlys[2], bool compat) +{ + int ret, i; + struct clk_hw_onecell_data *hw_data; + + hw_data = devm_kzalloc(dev, struct_size(hw_data, hws, NUM_CLKS), + GFP_KERNEL); + if (!hw_data) + return -ENOMEM; + hw_data->num = NUM_CLKS; + + for (i = 0; i < NUM_PLLS; i++) { + ret = lynx_clk_init(hw_data, dev, regmap, i, compat); + if (ret) + return ret; + + plls[i] = devm_clk_hw_get_clk(dev, + hw_data->hws[LYNX10G_PLLa(i)], + NULL); + if (IS_ERR(plls[i])) + return PTR_ERR(plls[i]); + + ex_dlys[i] = devm_clk_hw_get_clk(dev, + hw_data->hws[LYNX10G_PLLa_EX_DLY(i)], + NULL); + if (IS_ERR(ex_dlys[i])) + return PTR_ERR(plls[i]); + } + + ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, hw_data); + if (ret) + dev_err_probe(dev, ret, "could not register clock provider\n"); + + return ret; +} +EXPORT_SYMBOL_GPL(lynx_clks_init); + +MODULE_AUTHOR("Sean Anderson "); +MODULE_DESCRIPTION("Lynx 10G PLL driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig index 853958fb2c06..5d461232276f 100644 --- a/drivers/phy/freescale/Kconfig +++ b/drivers/phy/freescale/Kconfig @@ -47,3 +47,9 @@ config PHY_FSL_LYNX_28G found on NXP's Layerscape platforms such as LX2160A. Used to change the protocol running on SerDes lanes at runtime. Only useful for a restricted set of Ethernet protocols. + +config PHY_FSL_LYNX_10G + tristate + depends on COMMON_CLK + depends on ARCH_LAYERSCAPE || PPC || COMPILE_TEST + select REGMAP_MMIO diff --git a/include/linux/phy/lynx-10g.h b/include/linux/phy/lynx-10g.h new file mode 100644 index 000000000000..b7b80b3ee988 --- /dev/null +++ b/include/linux/phy/lynx-10g.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2022 Sean Anderson + */ + +#ifndef LYNX_10G +#define LYNX_10G + +struct clk; +struct device; +struct regmap; + +int lynx_clks_init(struct device *dev, struct regmap *regmap, + struct clk *plls[2], struct clk *ex_dlys[2], bool compat); + +#endif /* LYNX 10G */