@@ -32,9 +32,11 @@
#define TMP117_REG_DEVICE_ID 0xF
#define TMP117_RESOLUTION_10UC 78125
-#define TMP117_DEVICE_ID 0x0117
#define MICRODEGREE_PER_10MILLIDEGREE 10000
+#define TMP116_DEVICE_ID 0x1116
+#define TMP117_DEVICE_ID 0x0117
+
struct tmp117_data {
struct i2c_client *client;
s16 calibbias;
@@ -109,6 +111,14 @@ static const struct iio_chan_spec tmp117_channels[] = {
},
};
+static const struct iio_chan_spec tmp116_channels[] = {
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ },
+};
+
static const struct iio_info tmp117_info = {
.read_raw = tmp117_read_raw,
.write_raw = tmp117_write_raw,
@@ -125,6 +135,7 @@ static int tmp117_identify(struct i2c_client *client)
return dev_id;
switch (dev_id) {
+ case TMP116_DEVICE_ID:
case TMP117_DEVICE_ID:
return dev_id;
}
@@ -172,6 +183,11 @@ static int tmp117_probe(struct i2c_client *client)
indio_dev->info = &tmp117_info;
switch (dev_id) {
+ case TMP116_DEVICE_ID:
+ indio_dev->channels = tmp116_channels;
+ indio_dev->num_channels = ARRAY_SIZE(tmp116_channels);
+ indio_dev->name = "tmp116";
+ break;
case TMP117_DEVICE_ID:
indio_dev->channels = tmp117_channels;
indio_dev->num_channels = ARRAY_SIZE(tmp117_channels);
@@ -183,12 +199,14 @@ static int tmp117_probe(struct i2c_client *client)
}
static const struct of_device_id tmp117_of_match[] = {
+ { .compatible = "ti,tmp116", .data = (void *)TMP116_DEVICE_ID },
{ .compatible = "ti,tmp117", .data = (void *)TMP117_DEVICE_ID },
{ }
};
MODULE_DEVICE_TABLE(of, tmp117_of_match);
static const struct i2c_device_id tmp117_id[] = {
+ { "tmp116", TMP116_DEVICE_ID },
{ "tmp117", TMP117_DEVICE_ID },
{ }
};
The TMP116 is the predecessor of the TMP117. The TMP116 don't support custom offset calibration data, instead this register is used as generic EEPROM storage as well. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> --- v6: - fix compiling v5: - no changes v4: - split into two patches - 1st) handle fallback (Jonathan) - 2nd) this one, adding the support for tmp116 v3: - use switch case within probe() as well - don't hide smbus_read error within tmp117_identify() - add dedicated compatible v2: - no changes drivers/iio/temperature/tmp117.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)