deleted file mode 100644
@@ -1,50 +0,0 @@
-Exynos4x12 SoC series Imaging Subsystem (FIMC-IS)
-
-The FIMC-IS is a subsystem for processing image signal from an image sensor.
-The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5
-processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C
-and SPI bus controllers, PWM and ADC.
-
-fimc-is node
-------------
-
-Required properties:
-- compatible : should be "samsung,exynos4212-fimc-is" for Exynos4212 and
- Exynos4412 SoCs;
-- reg : physical base address and length of the registers set;
-- interrupts : must contain two FIMC-IS interrupts, in order: ISP0, ISP1;
-- clocks : list of clock specifiers, corresponding to entries in
- clock-names property;
-- clock-names : must contain "ppmuispx", "ppmuispx", "lite0", "lite1"
- "mpll", "sysreg", "isp", "drc", "fd", "mcuisp", "gicisp",
- "pwm_isp", "mcuctl_isp", "uart", "ispdiv0", "ispdiv1",
- "mcuispdiv0", "mcuispdiv1", "aclk200", "div_aclk200",
- "aclk400mcuisp", "div_aclk400mcuisp" entries,
- matching entries in the clocks property.
-pmu subnode
------------
-
-Required properties:
- - reg : must contain PMU physical base address and size of the register set.
-
-The following are the FIMC-IS peripheral device nodes and can be specified
-either standalone or as the fimc-is node child nodes.
-
-i2c-isp (ISP I2C bus controller) nodes
-------------------------------------------
-
-Required properties:
-
-- compatible : should be "samsung,exynos4212-i2c-isp" for Exynos4212 and
- Exynos4412 SoCs;
-- reg : physical base address and length of the registers set;
-- clocks : must contain gate clock specifier for this controller;
-- clock-names : must contain "i2c_isp" entry.
-
-For the above nodes it is required to specify a pinctrl state named "default",
-according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt.
-
-Device tree nodes of the image sensors' controlled directly by the FIMC-IS
-firmware must be child nodes of their corresponding ISP I2C bus controller node.
-The data link of these image sensors must be specified using the common video
-interfaces bindings, defined in video-interfaces.txt.
new file mode 100644
@@ -0,0 +1,220 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos4212-fimc-is.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos4212/4412 SoC Imaging Subsystem (FIMC-IS)
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+ - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description:
+ The FIMC-IS is a subsystem for processing image signal from an image sensor.
+ The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5
+ processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C
+ and SPI bus controllers, PWM and ADC.
+
+properties:
+ compatible:
+ enum:
+ - samsung,exynos4212-fimc-is
+
+ reg:
+ maxItems: 1
+
+ ranges: true
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 1
+
+ clocks:
+ maxItems: 21
+
+ clock-names:
+ items:
+ - const: lite0
+ - const: lite1
+ - const: ppmuispx
+ - const: ppmuispmx
+ - const: isp
+ - const: drc
+ - const: fd
+ - const: mcuisp
+ - const: gicisp
+ - const: mcuctl_isp
+ - const: pwm_isp
+ - const: ispdiv0
+ - const: ispdiv1
+ - const: mcuispdiv0
+ - const: mcuispdiv1
+ - const: mpll
+ - const: aclk200
+ - const: aclk400mcuisp
+ - const: div_aclk200
+ - const: div_aclk400mcuisp
+ - const: uart
+
+ interrupts:
+ maxItems: 2
+
+ iommus:
+ maxItems: 4
+
+ iommu-names:
+ items:
+ - const: isp
+ - const: drc
+ - const: fd
+ - const: mcuctl
+
+ power-domains:
+ maxItems: 1
+
+patternProperties:
+ "^pmu@[0-9a-f]+$":
+ type: object
+ additionalProperties: false
+ description:
+ Node representing the SoC's Power Management Unit (duplicated with the
+ correct PMU node in the SoC).
+
+ properties:
+ reg:
+ maxItems: 1
+
+ required:
+ - reg
+
+ "^i2c-isp@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/i2c/i2c-controller.yaml#
+ unevaluatedProperties: false
+ description:
+ ISP I2C bus controller
+
+ properties:
+ compatible:
+ const: samsung,exynos4212-i2c-isp
+
+ reg:
+ maxItems: 1
+
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: i2c_isp
+
+ pinctrl-0: true
+ pinctrl-names:
+ items:
+ - const: default
+
+ required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+required:
+ - compatible
+ - reg
+ - '#address-cells'
+ - clocks
+ - clock-names
+ - interrupts
+ - ranges
+ - '#size-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos4.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ fimc-is@12000000 {
+ compatible = "samsung,exynos4212-fimc-is";
+ reg = <0x12000000 0x260000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
+ <&isp_clock CLK_ISP_FIMC_LITE1>,
+ <&isp_clock CLK_ISP_PPMUISPX>,
+ <&isp_clock CLK_ISP_PPMUISPMX>,
+ <&isp_clock CLK_ISP_FIMC_ISP>,
+ <&isp_clock CLK_ISP_FIMC_DRC>,
+ <&isp_clock CLK_ISP_FIMC_FD>,
+ <&isp_clock CLK_ISP_MCUISP>,
+ <&isp_clock CLK_ISP_GICISP>,
+ <&isp_clock CLK_ISP_MCUCTL_ISP>,
+ <&isp_clock CLK_ISP_PWM_ISP>,
+ <&isp_clock CLK_ISP_DIV_ISP0>,
+ <&isp_clock CLK_ISP_DIV_ISP1>,
+ <&isp_clock CLK_ISP_DIV_MCUISP0>,
+ <&isp_clock CLK_ISP_DIV_MCUISP1>,
+ <&clock CLK_MOUT_MPLL_USER_T>,
+ <&clock CLK_ACLK200>,
+ <&clock CLK_ACLK400_MCUISP>,
+ <&clock CLK_DIV_ACLK200>,
+ <&clock CLK_DIV_ACLK400_MCUISP>,
+ <&clock CLK_UART_ISP_SCLK>;
+ clock-names = "lite0", "lite1", "ppmuispx",
+ "ppmuispmx", "isp",
+ "drc", "fd", "mcuisp",
+ "gicisp", "mcuctl_isp", "pwm_isp",
+ "ispdiv0", "ispdiv1", "mcuispdiv0",
+ "mcuispdiv1", "mpll", "aclk200",
+ "aclk400mcuisp", "div_aclk200",
+ "div_aclk400mcuisp", "uart";
+ iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
+ <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
+ iommu-names = "isp", "drc", "fd", "mcuctl";
+ power-domains = <&pd_isp>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pmu@10020000 {
+ reg = <0x10020000 0x3000>;
+ };
+
+ i2c-isp@12140000 {
+ compatible = "samsung,exynos4212-i2c-isp";
+ reg = <0x12140000 0x100>;
+ clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
+ clock-names = "i2c_isp";
+ pinctrl-0 = <&fimc_is_i2c1>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ image-sensor@10 {
+ compatible = "samsung,s5k6a3";
+ reg = <0x10>;
+ svdda-supply = <&cam_io_reg>;
+ svddio-supply = <&ldo19_reg>;
+ afvdd-supply = <&ldo19_reg>;
+ clock-frequency = <24000000>;
+ clocks = <&camera 1>;
+ clock-names = "extclk";
+ gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&csis1_ep>;
+ data-lanes = <1>;
+ };
+ };
+ };
+ };
+ };
@@ -18466,6 +18466,7 @@ L: linux-media@vger.kernel.org
S: Supported
Q: https://patchwork.linuxtv.org/project/linux-media/list/
F: Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml
+F: Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
F: Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml
F: drivers/media/platform/samsung/exynos4-is/
Convert the Samsung Exynos4212/4412 SoC Imaging Subsystem (FIMC-IS) bindings to DT schema. Changes during conversion - adjust to existing DTS and Linux driver: add iommus and power-domains. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Changes since v2: 1. Move size-cells next to address-cells. 2. Drop dead/debug code. --- .../bindings/media/exynos4-fimc-is.txt | 50 ---- .../media/samsung,exynos4212-fimc-is.yaml | 220 ++++++++++++++++++ MAINTAINERS | 1 + 3 files changed, 221 insertions(+), 50 deletions(-) delete mode 100644 Documentation/devicetree/bindings/media/exynos4-fimc-is.txt create mode 100644 Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml